November 2007 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: sh: improve generated code for HAC module (AC97)
by Manuel Lauss 05 Nov '07

05 Nov '07

Change loops in ac97_read/write functions to count down to zero rather than up. Gcc will then use the 'dt' (decrement-and-test) op instead of an increment/compare op-pair. Signed-off-by: Manuel Lauss <mano(a)roarinelk.homelinux.net> --- sound/soc/sh/hac.c | 13 +++++-------- 1 files changed, 5 insertions(+), 8 deletions(-) diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c index 8e3f039..34b77b9 100644 --- a/sound/soc/sh/hac.c +++ b/sound/soc/sh/hac.c @@ -105,7 +105,7 @@ static int hac_get_codec_data(struct hac_priv *hac, unsigned short r, unsigned int to1, to2, i; unsigned short adr; - for (i = 0; i < AC97_READ_RETRY; ++i) { + for (i = AC97_READ_RETRY; i; i--) { *v = 0; /* wait for HAC to receive something from the codec */ for (to1 = TMO_E4; @@ -132,7 +132,7 @@ static int hac_get_codec_data(struct hac_priv *hac, unsigned short r, udelay(21); } HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY); - return (i < AC97_READ_RETRY); + return i; } static unsigned short hac_read_codec_aux(struct hac_priv *hac, @@ -141,7 +141,7 @@ static unsigned short hac_read_codec_aux(struct hac_priv *hac, unsigned short val; unsigned int i, to; - for (i = 0; i < AC97_READ_RETRY; i++) { + for (i = AC97_READ_RETRY; i; i--) { /* send_read_request */ local_irq_disable(); HACREG(HACTSR) &= ~(TSR_CMDAMT); @@ -159,10 +159,7 @@ static unsigned short hac_read_codec_aux(struct hac_priv *hac, break; } - if (i == AC97_READ_RETRY) - return ~0; - - return val; + return i ? val : ~0; } static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg, @@ -172,7 +169,7 @@ static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg, struct hac_priv *hac = &hac_cpu_data[unit_id]; unsigned int i, to; /* write_codec_aux */ - for (i = 0; i < AC97_WRITE_RETRY; i++) { + for (i = AC97_WRITE_RETRY; i; i--) { /* send_write_request */ local_irq_disable(); HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT); -- 1.5.3.4

1 0

[alsa-devel] [PATCH] [ML403-AC97CR] Fix capture/periodic overrun bug.
by Joachim Foerster 05 Nov '07

05 Nov '07

Hi all, this is a bug fix for my ALSA driver I posted in August. Since then I hadn't the time to look at it, but some days ago I took some time and found the reason why there are so many overruns while capturing. Furthermore, this patch removes the one "heavy" printk for capture debugging. From: Joachim Foerster <JOFT(a)gmx.de> We have to do fairly accurate counting of the minimal periods, instead of being lazy and just setting the number to zero as soon as one period elapses. Signed-off-by: Joachim Foerster <JOFT(a)gmx.de> --- sound/drivers/ml403-ac97cr.c | 6 ++---- sound/drivers/pcm-indirect2.c | 20 ++------------------ 2 files changed, 4 insertions(+), 22 deletions(-) diff --git a/sound/drivers/ml403-ac97cr.c b/sound/drivers/ml403-ac97cr.c index 2636249..1b16a21 100644 --- a/sound/drivers/ml403-ac97cr.c +++ b/sound/drivers/ml403-ac97cr.c @@ -28,11 +28,9 @@ * accesses to a minimum, because after a variable amount of accesses, the AC97 * controller doesn't raise the register access finished bit anymore ... * - * - Capture support works - basically, but after ~30s (with rates > ~20kHz) - * ALSA stops reading captured samples from the intermediate buffer and - * therefore a overrun happens - ATM I don't know what's wrong. - * * - Playback support seems to be pretty stable - no issues here. + * - Capture support "works" now, too. Overruns don't happen any longer so often. + * But there might still be some ... */ #include <sound/driver.h> diff --git a/sound/drivers/pcm-indirect2.c b/sound/drivers/pcm-indirect2.c index a36215a..ef74a38 100644 --- a/sound/drivers/pcm-indirect2.c +++ b/sound/drivers/pcm-indirect2.c @@ -403,7 +403,7 @@ snd_pcm_indirect2_playback_interrupt(struct snd_pcm_substream *substream, rec->min_multiple); rec->mul_elapsed++; #endif - rec->min_periods = 0; + rec->min_periods = (rec->min_periods % rec->min_multiple); snd_pcm_period_elapsed(substream); } } @@ -568,24 +568,8 @@ snd_pcm_indirect2_capture_interrupt(struct snd_pcm_substream *substream, rec->mul_elapsed_real += (rec->min_periods / rec->min_multiple); rec->mul_elapsed++; - - if (!(rec->mul_elapsed % 4)) { - struct snd_pcm_runtime *runtime = substream->runtime; - unsigned int appl_ptr = - frames_to_bytes(runtime, - (unsigned int)runtime->control-> - appl_ptr) % rec->sw_buffer_size; - int diff = rec->sw_data - appl_ptr; - if (diff < 0) - diff += rec->sw_buffer_size; - snd_printk(KERN_DEBUG - "STAT: mul_elapsed: %d, sw_data: %u, " - "appl_ptr (bytes): %u, diff: %d\n", - rec->mul_elapsed, rec->sw_data, appl_ptr, - diff); - } #endif - rec->min_periods = 0; + rec->min_periods = (rec->min_periods % rec->min_multiple); snd_pcm_period_elapsed(substream); } } -- 1.5.2.5

3 3

[alsa-devel] [PATCH] hda: STAC9228 DMIC
by Matthew Ranostay 05 Nov '07

05 Nov '07

Added support for the dmics and enabled EAPD for several laptops with STAC9228 cards. --- Signed-off-by: Matthew Ranostay <mranostay(a)gmail.com> diff -r 808153682813 pci/hda/patch_sigmatel.c --- a/pci/hda/patch_sigmatel.c Fri Oct 26 15:10:15 2007 +0200 +++ b/pci/hda/patch_sigmatel.c Thu Nov 01 15:46:17 2007 -0500 @@ -2778,14 +2778,21 @@ static int patch_stac927x(struct hda_cod spec->dmic_nids = stac927x_dmic_nids; spec->num_dmics = STAC927X_NUM_DMICS; spec->dmux_nid = 0x1b; + + /* Enable DMIC0 */ + stac92xx_set_config_reg(codec, 0x13, 0x90a60040); + + /* GPIO2 High = Enable EAPD */ + spec->gpio_mask = spec->gpio_data = 0x00000004; break; default: - spec->num_dmics = 0; + spec->num_dmics = 0; + + /* GPIO0 High = Enable EAPD */ + spec->gpio_mask = spec->gpio_data = 0x00000001; } spec->multiout.dac_nids = spec->dac_nids; - /* GPIO0 High = Enable EAPD */ - spec->gpio_mask = spec->gpio_data = 0x00000001; stac92xx_enable_gpio_mask(codec); err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);

3 2

[alsa-devel] HDA: Add Asus VX1 support.
by Tobin Davis 05 Nov '07

05 Nov '07

Simple patch to add the Asus VX1 laptop to the Analog Devices pci quirk list. Signed off by Tobin Davis <tdavis(a)dsl-only.net>

2 1

[alsa-devel] Upgrading alsa drivers. current and hg from suse site
by Nigel Henry 02 Nov '07

02 Nov '07

I try to help folks now and then with sound problems. I don't have an hda intel card, but try to point folks in the right direction to get help. Question: I've sorted out the upgrading of the alsa driver on Fedora, Archlinux, and Debian, even though I don't need too, as my audigy2 soundblaster, and on the other machine, an ensoniq (ens1371) are fine. this was from the latest 1.0.15 release at http://alsa-project.org. My question is to do with the nightly hg releases obtainable from. ftp://ftp.suse.com/pub/projects/alsa/snapshot/driver/ Will these install using the same ./configure, make, (su to root), then make install, as with upgrading to the current 1.0.15 version from. http://alsa-project.org. Sorry if this is a trivial question, but I don't want to give bad information to folks looking for help. I've only recently subscribed to the alsa-devel list, and hadn't realised how much effort was being put in to resolve soundcard problems, particularly hda intel ones. Great work folks. I'm not clued up enough to help out, but do appreciate your hard work. Nigel.

2 1

[alsa-devel] hdmi sound output on abit an-m2hd mainboard (ALC888)
by Gernot Pansy 02 Nov '07

02 Nov '07

hy, can some one explain me what the developers need to get hdmi sound working on this mainboard? it's a nvidia nforce mcp67 with an alc888 sound chip onboard. should i open a bug? thx, gernot notz@hollywood:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC883 Digital [ALC883 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 notz@hollywood:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC883 Digital [ALC883 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 notz@hollywood:~$ aplay -L default:CARD=NVidia HDA NVidia, ALC883 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC883 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC883 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC883 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC883 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC883 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC883 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers null Discard all samples (playback) or generate zero samples (capture) notz@hollywood:~$ cat /proc/asound/card0/codec#0 Codec: Realtek ALC888 Address: 0 Vendor Id: 0x10ec0888 Subsystem Id: 0x147ba601 Revision Id: 0x100001 Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x02 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital PCM: rates [0x560]: 44100 48000 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] [0x1a 0x1a] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1a 0x1a] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1a 0x1a] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1a 0x1a] Connection: 2 0x05 0x0b Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Detect Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0x40: OUT Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Detect Pin Default 0x01011012: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x40: OUT Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0836: IN OUT Detect Pin Default 0x01016011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange Pin-ctls: 0x40: OUT Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0836: IN OUT Detect Pin Default 0x01012014: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Grey Pin-ctls: 0x40: OUT Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08373e: IN OUT HP Detect Pin Default 0x01a19830: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08373e: IN OUT HP Detect Pin Default 0x02a1983f: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08373e: IN OUT HP Detect Pin Default 0x01813031: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08373e: IN OUT HP Detect Pin Default 0x02214c1f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x99330132: [Fixed] CD at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x99830133: [Fixed] Line In at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x0810: OUT Pin Default 0x01451120: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x25 0x0b

2 2

[alsa-devel] STAC9228
by Matthew Meyer 02 Nov '07

02 Nov '07

Hi, I'm using a Fujitsu Stylistic ST5112 tablet PC with Ubuntu 7.10. It has the Sigma Tel STAC9228 sound card. I am having tons of trouble getting the sound to work; I had this problem in 7.04 too. I used both alsa 1.0.14 and 1.0.15RC3, and no luck. I read through ALSA-Configuration.txt and found the model at line 924, and I tried using model=ref, model=3stack and model=5stack, but none of them worked. The only time I've been able to get any sound at all was when I had a completely wrong bit of text entered for model=xxx, and in that case the system beep worked, but no sound cards were recognized or loaded at all. I've checked for the card being muted, and it's not... so I don't know what could be wrong. Maybe you have some insight, otherwise, I guess this could be a bug? Anyway, I hope this helps. Matt lspci -nv output: 00:00.0 0600: 8086:27a0 (rev 03) Subsystem: 10cf:1378 Flags: bus master, fast devsel, latency 0 Capabilities: <access denied> 00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA]) Subsystem: 10cf:137e Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f0300000 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at e0000000 (32-bit, prefetchable) [size=256M] Memory at f0400000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> 00:02.1 0380: 8086:27a6 (rev 03) Subsystem: 10cf:137e Flags: bus master, fast devsel, latency 0 Memory at f0380000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 0403: 8086:27d8 (rev 02) Subsystem: 10cf:13b4 Flags: bus master, fast devsel, latency 0, IRQ 23 Memory at f0640000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0100000-f01fffff Prefetchable memory behind bridge: 0000000090000000-00000000900fffff Capabilities: <access denied> 00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 Capabilities: <access denied> 00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: 90100000-901fffff Capabilities: <access denied> 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI]) Subsystem: 10cf:1389 Flags: bus master, medium devsel, latency 0, IRQ 20 I/O ports at 1820 [size=32] 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI]) Subsystem: 10cf:1389 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 1840 [size=32] 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI]) Subsystem: 10cf:1389 Flags: bus master, medium devsel, latency 0, IRQ 21 I/O ports at 1860 [size=32] 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI]) Subsystem: 10cf:1389 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 1880 [size=32] 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI]) Subsystem: 10cf:138a Flags: bus master, medium devsel, latency 0, IRQ 20 Memory at f0644000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=10, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0200000-f02fffff Prefetchable memory behind bridge: 0000000088000000-000000008fffffff Capabilities: <access denied> 00:1f.0 0601: 8086:27b9 (rev 02) Subsystem: 10cf:1384 Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: 10cf:1385 Flags: bus master, medium devsel, latency 0, IRQ 21 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 1810 [size=16] 00:1f.2 0106: 8086:27c5 (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: 10cf:1387 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 22 I/O ports at 18d0 [size=8] I/O ports at 18c4 [size=4] I/O ports at 18c8 [size=8] I/O ports at 18c0 [size=4] I/O ports at 18b0 [size=16] Memory at f0644400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1f.3 0c05: 8086:27da (rev 02) Subsystem: 10cf:1388 Flags: medium devsel, IRQ 11 I/O ports at 18e0 [size=32] 02:00.0 0200: 11ab:4363 (rev 12) Subsystem: 10cf:139a Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f0100000 (64-bit, non-prefetchable) [size=16K] I/O ports at 2000 [size=256] [virtual] Expansion ROM at 90000000 [disabled] [size=128K] Capabilities: <access denied> 05:00.0 0200: 168c:001c (rev 01) Subsystem: 10cf:139c Flags: bus master, fast devsel, latency 0, IRQ 21 Memory at 90100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 08:03.0 0607: 1217:7134 (rev 21) Subsystem: 10cf:131e Flags: bus master, stepping, slow devsel, latency 168, IRQ 19 Memory at f0203000 (32-bit, non-prefetchable) [size=4K] Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 88000000-8bfff000 (prefetchable) Memory window 1: 94000000-97fff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff 16-bit legacy interface ports at 0001 08:03.1 0607: 1217:7134 (rev 21) Subsystem: 10cf:131e Flags: bus master, stepping, slow devsel, latency 168, IRQ 19 Memory at f0204000 (32-bit, non-prefetchable) [size=4K] Bus: primary=08, secondary=0d, subordinate=10, sec-latency=176 Memory window 0: 8c000000-8ffff000 (prefetchable) Memory window 1: 98000000-9bfff000 I/O window 0: 00003800-000038ff I/O window 1: 00003c00-00003cff 16-bit legacy interface ports at 0001 08:03.2 0805: 1217:7120 (rev 01) Subsystem: 10cf:131e Flags: slow devsel, IRQ 19 Memory at f0202800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 08:03.3 0680: 1217:7130 (rev 01) Subsystem: 10cf:131e Flags: slow devsel, IRQ 11 Memory at f0200000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 08:03.4 0c00: 1217:00f7 (rev 02) (prog-if 10 [OHCI]) Subsystem: 1217:00f7 Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at f0201000 (32-bit, non-prefetchable) [size=4K] Memory at f0202000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied>

2 1

[alsa-devel] Output levels issue on Plantronics .Audio 510 USB Headset
by David Hilvert 01 Nov '07

01 Nov '07

The Plantronics .Audio 510 USB headset (Vendor=047f ProdID=c001) seems to have certain output levels issues with drivers in 2.6.23-rc2-mm2 (at least). In particular, setting amixer -c 1 sset PCM 3 results in no output, while amixer -c 1 sset PCM 4 results in levels that are somewhat loud for applications tested. Volume appears to be roughly linear in the range above PCM=4, if loud for applications tested. The USB ID information (Vendor=047f ProdID=c001) doesn't seem to be noted as exceptional by any driver code in the 2.6.23-rc2-mm2 kernel, and web searches for 'plantronics' or 'audio 510' and linux or alsa seem to return little pertinent information. What would be most useful to try next? Various outputs follow: $ amixer -c 1 Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 151 Mono: Front Left: Playback 6 [4%] [-27.29dB] [on] Front Right: Playback 6 [4%] [-27.29dB] [on] Simple mixer control 'Mic',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Mono Limits: Capture 0 - 16 Mono: Capture 14 [88%] [21.00dB] [on] Simple mixer control 'Auto Gain Control',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] $ cat /proc/bus/usb/devices T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=047f ProdID=c001 Rev= 1.00 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio I:* If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio E: Ad=01(O) Atr=09(Isoc) MxPS= 200 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio E: Ad=82(I) Atr=05(Isoc) MxPS= 100 Ivl=1ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=83(I) Atr=03(Int.) MxPS= 4 Ivl=32ms

1 0

[alsa-devel] Philips USB sound MCM590
by Eduardo 01 Nov '07

01 Nov '07

Hi peoples, excuse my poor English I'm newbe in this community, by i have a problem. I've a Philips mcm590 Microsystem, this microsystem have a usb connection but only windows driver. I try a dump my linux kernel using messages for dmesg and i conclude, this sound need a special boot sequence in a usbaudio.c I install a winxp in my Fedora in a VirtualBox and make a dump for USB connection using a USBNOOP also i print the "PROGRAMMING GUIDE FOR LINUX USB DEVICE" and "Universal Serial Bus device class defintion for audio devices" but i'm a newbe in a kernel devel and C devel I'm java developer i need your help Eduardo

1 0

[alsa-devel] Info + Osprey 440 Audio help
by Norbert Naveen 01 Nov '07

01 Nov '07

1 0