May 2018 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed May 2 05:13:47 CEST 2018
Ending: Thu May 31 23:08:58 CEST 2018
Messages: 525

• [Sound-open-firmware] [PATCH 0/2] DMA trace level   Liam Girdwood
• [Sound-open-firmware] [PATCH 0/2] DMA trace level   yanwang
• [Sound-open-firmware] [PATCH 0/2] DMA trace level   Liam Girdwood
• [Sound-open-firmware] [PATCH 0/2] DMA trace level   yanwang
• [Sound-open-firmware] [PATCH 0/3] Host based component testing   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 0/3] Host based component testing   Liam Girdwood
• [Sound-open-firmware] [PATCH 0/3] Host based component testing   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 0/7] [v3]DMIC: Patch series for direct attach microphones   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 0/7] interrupt refinement   Rander Wang
• [Sound-open-firmware] [PATCH 0/7] Multiple DAI type support in topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 0/7] Multiple DAI type support in topology   Liam Girdwood
• [Sound-open-firmware] [PATCH 0/7] Multiple DAI type support in topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 01/15] [RFC][v2]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 01/15] [RFC][v2]DMIC: Add PDM microphones (DMIC) support to DAI   Liam Girdwood
• [Sound-open-firmware] [PATCH 01/15] [RFC][v2]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 01/15] [RFC][v2]DMIC: Add PDM microphones (DMIC) support to DAI   Liam Girdwood
• [Sound-open-firmware] [PATCH 01/15] [RFC][v2]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 01/15] [RFC][v2]DMIC: Add PDM microphones (DMIC) support to DAI   Liam Girdwood
• [Sound-open-firmware] [PATCH 02/15] [RFC][v2]DMIC: Add SOF DMIC definitions   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 03/15] [RFC][v2]DMIC: Add configure command switch to disable DMIC feature   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 04/15] [RFC][v2]DMIC: Add dmic.c to drivers Makefile.am   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 05/15] [RFC][v2]DMIC: Add SOF DMIC IPC definitions   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   Liam Girdwood
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   Liam Girdwood
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   yanwang
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   Liam Girdwood
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   Liam Girdwood
• [Sound-open-firmware] [PATCH 06/15] [RFC][v2]DMIC: Add SOF DMIC trace definitions   yanwang
• [Sound-open-firmware] [PATCH 07/15] [RFC][v2]DMIC: Add DMIC DMA setting to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 08/15] [RFC][v2]DMIC: Add DMIC registers bit fields handling macros   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 09/15] [RFC][v2]DMIC: Change math library link order   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/2] ASoC: SOF: set up volume tables with topology tlv data   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 1/2] ASoC: SOF: set up volume tables with topology tlv data   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH 1/2] ASoC: SOF: set up volume tables with topology tlv data   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 1/2] ASoC: SOF: set up volume tables with topology tlv data   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH 1/2] mailbox: use mailbox function for SW_REG   Pan, Xiuli
• [Sound-open-firmware] [PATCH 1/2] rimage: fix wrong error message   Xiuli Pan
• [Sound-open-firmware] [PATCH 1/2] rimage: fix wrong error message   Liam Girdwood
• [Sound-open-firmware] [PATCH 1/2] topology: bxt: change to use dmac0 for capture   Keyon Jie
• [Sound-open-firmware] [PATCH 1/2] topology: bxt: change to use dmac0 for capture   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 1/2] topology: change virtual widget types to non-DSP ones   Keyon Jie
• [Sound-open-firmware] [PATCH 1/2] topology: change virtual widget types to non-DSP ones   Keyon Jie
• [Sound-open-firmware] [PATCH 1/2] topology: change virtual widget types to non-DSP ones   rander.wang
• [Sound-open-firmware] [PATCH 1/2] topology: change virtual widget types to non-DSP ones   Keyon Jie
• [Sound-open-firmware] [PATCH 1/3] [RFC]tune: add common testbench common headers and source files   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 1/3] [RFC]tune: add common testbench common headers and source files   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/3] [RFC]tune: add common testbench common headers and source files   Liam Girdwood
• [Sound-open-firmware] [PATCH 1/3] DAI: Check DAI type in dai_get() in APL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/3] DAI: Check DAI type in dai_get() in APL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/3] DAI: Check DAI type in dai_get() in APL platform   Liam Girdwood
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Keyon Jie
• [Sound-open-firmware] [PATCH 1/4] [RFC]DMIC: Add PDM microphones (DMIC) support to DAI   Keyon Jie
• [Sound-open-firmware] [PATCH 1/7] [RFC]topology: separate ssp params from dai common params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 1/7] [v3]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/7] [v3]DMIC: Add PDM microphones (DMIC) support to DAI   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 1/7] [v3]DMIC: Add PDM microphones (DMIC) support to DAI   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 1/7] interrupt: refine irq structure and algorithm   Rander Wang
• [Sound-open-firmware] [PATCH 1/7] interrupt: refine irq structure and algorithm   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH 10/15] [RFC][v2]DMIC: Add min/max, ceil divide, find number, and normalize utils   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 10/15] [RFC][v2]DMIC: Add min/max, ceil divide, find number, and normalize utils   Liam Girdwood
• [Sound-open-firmware] [PATCH 10/15] [RFC][v2]DMIC: Add min/max, ceil divide, find number, and normalize utils   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 10/15] [RFC][v2]DMIC: Add min/max, ceil divide, find number, and normalize utils   Liam Girdwood
• [Sound-open-firmware] [PATCH 10/15] [RFC][v2]DMIC: Add min/max, ceil divide, find number, and normalize utils   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 11/15] [RFC][v2]DMIC: Fix compilation issue with SSP by removing duplicate macro   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 12/15] [RFC][v2]DMIC: Changes to APL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 13/15] [RFC][v2]DMIC: Changes to CNL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 14/15] [RFC][v2]DMIC: Fix compilation issue with SRC   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 15/15] [RFC][v2]DMIC: Add decimator raw coefficients tables   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 2/2] ASoC: SOF: use updated volume gain tables in kcontrol IO handlers   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 2/2] rimage: add error handler for localtime call   Xiuli Pan
• [Sound-open-firmware] [PATCH 2/2] scripts: docker: Add proxy settings   Xiuli Pan
• [Sound-open-firmware] [PATCH 2/2] scripts: docker: Add proxy settings   Liam Girdwood
• [Sound-open-firmware] [PATCH 2/2] scripts: docker: Add proxy settings   Pan, Xiuli
• [Sound-open-firmware] [PATCH 2/2] scripts: docker: Add proxy settings   Pan, Xiuli
• [Sound-open-firmware] [PATCH 2/2] scripts: docker: Add proxy settings   Liam Girdwood
• [Sound-open-firmware] [PATCH 2/2] scripts: docker: Add proxy settings   Pan, Xiuli
• [Sound-open-firmware] [PATCH 2/2] topology: sof-apl-tdf8532: add virtual widgets and routes   Keyon Jie
• [Sound-open-firmware] [PATCH 2/2] topology: sof-apl-tdf8532: add virtual widgets and routes   Liam Girdwood
• [Sound-open-firmware] [PATCH 2/2] Topology: sof-apl-tdf8532: enable all 6 SSPs and pipelines.   Keyon Jie
• [Sound-open-firmware] [PATCH 2/3] [RFC]tune: add fileread and filewrite components   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 2/3] [RFC]tune: add fileread and filewrite components   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 2/3] [RFC]tune: add fileread and filewrite components   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 2/3] [RFC]tune: add fileread and filewrite components   Liam Girdwood
• [Sound-open-firmware] [PATCH 2/3] DAI: Check DAI type in dai_get() in CNL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 2/3] DAI: Check DAI type in dai_get() in CNL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 2/7] [RFC]topology: scripts: changes to accomodate different DAI types   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 2/7] [v3]DMIC: Add configure command switch to disable DMIC   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 2/7] interrupt: add irq id in IRQ   Rander Wang
• [Sound-open-firmware] [PATCH 3/3] [RFC]tune: add volume testbench   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 3/3] [RFC]tune: add volume testbench   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 3/3] [RFC]tune: add volume testbench   Liam Girdwood
• [Sound-open-firmware] [PATCH 3/3] [RFC]tune: add volume testbench   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 3/3] scripts: Add ability to build in a container   Pan, Xiuli
• [Sound-open-firmware] [PATCH 3/3] scripts: Add ability to build in a container   Liam Girdwood
• [Sound-open-firmware] [PATCH 3/3] scripts: Add ability to build in a container   Pan, Xiuli
• [Sound-open-firmware] [PATCH 3/3] scripts: Add ability to build in a container   Dylan Reid
• [Sound-open-firmware] [PATCH 3/3] scripts: Add ability to build in a container   Dylan Reid
• [Sound-open-firmware] [PATCH 3/3] scripts: Add ability to build in a container   Pan, Xiuli
• [Sound-open-firmware] [PATCH 3/3] scripts: Add ability to build in a container   Dylan Reid
• [Sound-open-firmware] [PATCH 3/3] scripts: Add ability to build in a container   Pan, Xiuli
• [Sound-open-firmware] [PATCH 3/3] SHIM: Correction for the APL header file macro   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 3/3] SHIM: Correction for the APL header file macro   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 3/4] [RFC]DMIC: APL and CNL platforms impact   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 3/7] [RFC]topology: add DMIC tokens   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 3/7] [v3]DMIC: DMIC: Add dmic.c to drivers Makefile.am   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 3/7] [v3]DMIC: DMIC: Add dmic.c to drivers Makefile.am   Liam Girdwood
• [Sound-open-firmware] [PATCH 3/7] [v3]DMIC: DMIC: Add dmic.c to drivers Makefile.am   Liam Girdwood
• [Sound-open-firmware] [PATCH 3/7] [v3]DMIC: DMIC: Add dmic.c to drivers Makefile.am   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 3/7] cnl-interrupt: refine interrupt setting for change in irq_desc   Rander Wang
• [Sound-open-firmware] [PATCH 3/7] cnl-interrupt: refine interrupt setting for change in irq_desc   Liam Girdwood
• [Sound-open-firmware] [PATCH 4/7] [RFC]topology: make m4 filenames dai type agnostic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 4/7] [v3]DMIC: Changes to APL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 4/7] cnl-dma: remove special dma code for cnl   Rander Wang
• [Sound-open-firmware] [PATCH 5/7] [RFC]topology: scripts: add dmic test topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 5/7] [v3]DMIC: Changes to CNL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 5/7] [v3]DMIC: Changes to CNL platform   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 5/7] [v3]DMIC: Changes to CNL platform   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 5/7] apl-interrupt: refine interrupt code according to interrupt change   Rander Wang
• [Sound-open-firmware] [PATCH 6/7] [RFC]topology: add DMIC config definition to DAI config   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 6/7] [v3]DMIC: Add for format.h conversion from fractional to float   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 6/7] byt-interrupt: port irq change to byt   Rander Wang
• [Sound-open-firmware] [PATCH 7/7] [RFC]topology: add DMIC dai support in test capture m4   Ranjani Sridharan
• [Sound-open-firmware] [PATCH 7/7] [v3]DMIC: Move ceil_divide from numbers.c to numbers.h as static inline   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH 7/7] hsw-interrupt: port irq change to hsw   Rander Wang
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Liam Girdwood
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Liam Girdwood
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Yan Wang
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Liam Girdwood
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   yanwang
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Liam Girdwood
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Yan Wang
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Liam Girdwood
• [Sound-open-firmware] [PATCH] [RFC]rmbox: include trace class definitions from trace header   Yan Wang
• [Sound-open-firmware] [PATCH] [RFC]SOF: FIX: adjust the SSC3's TFT/RFT field in SSP   Wu Zhigang
• [Sound-open-firmware] [PATCH] [RFC]Tone: use volume control command instead of switch   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] [RFC]Tone: use volume control command instead of switch   Liam Girdwood
• [Sound-open-firmware] [PATCH] [RFC]Tone: use volume control command instead of switch   Pan, Xiuli
• [Sound-open-firmware] [PATCH] [RFC]Tone: use volume control command instead of switch   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] [RFC] topology: scripts: update for 4-channel feature.   Wu Zhigang
• [Sound-open-firmware] [PATCH] [RFC] topology: scripts: update for 4-channel feature.   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] [RFC] topology: scripts: update for 4-channel feature.   zhigangw
• [Sound-open-firmware] [PATCH] [RFC] topology: scripts: update for 4-channel feature.   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] [RFC] topology: scripts: update for 4-channel feature.   zhigangw
• [Sound-open-firmware] [PATCH] [RFC] topology: scripts: update for 4-channel feature.   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] [RFC] topology: scripts: update for 4-channel feature.   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] apl-ssp: change and wrap status transition into ssp_stop   Keyon Jie
• [Sound-open-firmware] [PATCH] apl-ssp: change and wrap status transition into ssp_stop   Liam Girdwood
• [Sound-open-firmware] [PATCH] apl-ssp: change and wrap status transition into ssp_stop   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] apl-ssp: change and wrap status transition into ssp_stop   Keyon Jie
• [Sound-open-firmware] [PATCH] APL: dw-dma: fix interrupt clear   Xiuli Pan
• [Sound-open-firmware] [PATCH] APL: dw-dma: fix interrupt clear   Keyon Jie
• [Sound-open-firmware] [PATCH] APL: dw-dma: fix interrupt clear   Liam Girdwood
• [Sound-open-firmware] [PATCH] apl: memory: expand number of 256 Bytes block to be 64   Keyon Jie
• [Sound-open-firmware] [PATCH] apl: memory: expand number of 256 Bytes block to be 64   Liam Girdwood
• [Sound-open-firmware] [PATCH] byt-ssp: change and wrap status transition into ssp_stop   Keyon Jie
• [Sound-open-firmware] [PATCH] byt-ssp: change and wrap status transition into ssp_stop   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] byt-ssp: fix status transition for ssp_stop   Keyon Jie
• [Sound-open-firmware] [PATCH] byt-ssp: fix status transition for ssp_stop   Liam Girdwood
• [Sound-open-firmware] [PATCH] DMIC: Add robustness against erroneous configuration parameters   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH] DMIC: Add robustness against erroneous configuration parameters   Liam Girdwood
• [Sound-open-firmware] [PATCH] DMIC: configure DMIC with parameters from ipc instead of hardcoded params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] DMIC: configure DMIC with parameters from ipc instead of hardcoded params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] DMIC: configure DMIC with parameters from ipc instead of hardcoded params   Liam Girdwood
• [Sound-open-firmware] [PATCH] docker: Add details on running docker as non sudo user.   Liam Girdwood
• [Sound-open-firmware] [PATCH] docker: Add details on running docker as non sudo user.   Dylan Reid
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   Wu Zhigang
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   Jie, Yang
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   Liam Girdwood
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   Pan, Xiuli
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   zhigangw
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   Liam Girdwood
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   Pan, Xiuli
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   Wu, Zhigang
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   zhigangw
• [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host   Liam Girdwood
• [Sound-open-firmware] [PATCH] host: remove first_copy workaround for HDA DMA   Keyon Jie
• [Sound-open-firmware] [PATCH] host: remove first_copy workaround for HDA DMA   Liam Girdwood
• [Sound-open-firmware] [PATCH] host: remove first_copy workaround for HDA DMA   Lauda, Tomasz
• [Sound-open-firmware] [PATCH] host build: include arch/string.h   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] ipc: no need to set up host page table for hostless pipelines   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] ipc: no need to set up host page table for hostless pipelines   Liam Girdwood
• [Sound-open-firmware] [PATCH] ipc: trap dma_start() return value, bail on error   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] ipc: trap dma_start() return value, bail on error   Liam Girdwood
• [Sound-open-firmware] [PATCH] makefile: add reset vector back   Xiuli Pan
• [Sound-open-firmware] [PATCH] makefile: add reset vector back   Liam Girdwood
• [Sound-open-firmware] [PATCH] makefile: link reset vector to main image if there is no boot ldr   Marcin Maka
• [Sound-open-firmware] [PATCH] makefile: link reset vector to main image if there is no boot ldr   Liam Girdwood
• [Sound-open-firmware] [PATCH] pipeline: fix typo in pipeline disconnect   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] pipeline: fix typo in pipeline disconnect   Liam Girdwood
• [Sound-open-firmware] [PATCH] platform: apl: expand max stream number to be 16   Keyon Jie
• [Sound-open-firmware] [PATCH] platform: apl: expand max stream number to be 16   Liam Girdwood
• [Sound-open-firmware] [PATCH] platform: apl: expand max stream number to be 16   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] platform: apl: expand max stream number to be 16   Liam Girdwood
• [Sound-open-firmware] [PATCH] platform: apl: expand max stream number to be 16   Jie, Yang
• [Sound-open-firmware] [PATCH] Removing unneeded XTOS sections from boot_ldr and main fw.   Liam Girdwood
• [Sound-open-firmware] [PATCH] Removing unneeded XTOS sections from boot_ldr and main fw.   Liam Girdwood
• [Sound-open-firmware] [PATCH] Replacing #define for WAITI behavior.   Liam Girdwood
• [Sound-open-firmware] [PATCH] rimage: openssl: add compatibility for openssl 1.1.0   Xiuli Pan
• [Sound-open-firmware] [PATCH] rimage: openssl: add compatibility for openssl 1.1.0   Liam Girdwood
• [Sound-open-firmware] [PATCH] rimage: openssl: fix build for openssl 1.1.0   Liam Girdwood
• [Sound-open-firmware] [PATCH] scripts: docker: Add apt proxy setting   Xiuli Pan
• [Sound-open-firmware] [PATCH] scripts: Modify Docker Ubuntu version   Liam Girdwood
• [Sound-open-firmware] [PATCH] scripts: remove prefix for host build   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] scripts: remove prefix for host build   Liam Girdwood
• [Sound-open-firmware] [PATCH] SOFT: Add SA, DMIC and SCH trace class definition.   yan.wang at linux.intel.com
• [Sound-open-firmware] [PATCH] SOFT: Add SA, DMIC and SCH trace class definition.   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] SOFT: Add SA, DMIC and SCH trace class definition.   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] SOFT: Add SA, DMIC and SCH trace class definition.   yanwang
• [Sound-open-firmware] [PATCH] SOFT: Add SA, DMIC and SCH trace class definition.   yanwang
• [Sound-open-firmware] [PATCH] SOFT: Add SA, DMIC and SCH trace class definition.   Yan Wang
• [Sound-open-firmware] [PATCH] SSP: Add trace print for config->format value into ssp_set_config()   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH] SSP: Add trace print for config->format value into ssp_set_config()   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: add fake dapm route supported in topology file   Rander Wang
• [Sound-open-firmware] [PATCH] topology: add fake dapm route supported in topology file   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: add fake dapm route supported in topology file   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] topology: add ssp tokens defined in kernel UAPI header   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: add ssp tokens defined in kernel UAPI header   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: add virtual dapm route supported in topology file   Rander Wang
• [Sound-open-firmware] [PATCH] topology: add virtual dapm route supported in topology file   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: dai: add link_id for dai_link matching in DAI_CONFIG   Keyon Jie
• [Sound-open-firmware] [PATCH] topology: dai: add link_id for dai_link matching in DAI_CONFIG   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: dai: add link_id for dai_link matching in DAI_CONFIG   Keyon Jie
• [Sound-open-firmware] [PATCH] topology: dai: add link_id for dai_link matching in DAI_CONFIG   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: dai: add link_id for dai_link matching in DAI_CONFIG   Jie, Yang
• [Sound-open-firmware] [PATCH] topology:scripts: fix tplg build script to compile last topology when using xargs   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology:scripts: fix tplg build script to compile last topology when using xargs   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: scripts: make topology build script generic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: scripts: make topology build script generic   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] topology: scripts: make topology build script generic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: scripts: make topology build script generic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: scripts: make topology build script generic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: separate ssp params from dai common params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: separate ssp params from dai common params   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] topology: separate ssp params from dai common params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: test: add some passthrough topologies for CNL   Zhang Keqiao
• [Sound-open-firmware] [PATCH] topology: tone pipeline should be DAI driver and not timer driven   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: tone pipeline should be DAI driver and not timer driven   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: utility for visualizing topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: utility for visualizing topology   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] topology: utility for visualizing topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] topology: utility for visualizing topology   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: utility for visualizing topology   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH] topology: utility for visualizing topology   Liam Girdwood
• [Sound-open-firmware] [PATCH] topology: utility for visualizing topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH] trace: Modfiy trace event to accept uint64_t data   Xiuli Pan
• [Sound-open-firmware] [PATCH] trace: Modfiy trace event to accept uint64_t data   Yan Wang
• [Sound-open-firmware] [PATCH_V2 1/7] interrupt: refine irq structure and algorithm   Rander Wang
• [Sound-open-firmware] [PATCH_V2 3/7] cnl-interrupt: refine interrupt setting for change in irq_desc   Rander Wang
• [Sound-open-firmware] [PATCH_V2 3/7] cnl-interrupt: refine interrupt setting for change in irq_desc   Liam Girdwood
• [Sound-open-firmware] [PATCH_V2 3/7] cnl-interrupt: refine interrupt setting for change in irq_desc   Marcin Maka
• [Sound-open-firmware] [PATCH_V2 3/7] cnl-interrupt: refine interrupt setting for change in irq_desc   rander.wang
• [Sound-open-firmware] [PATCH_V2 3/7] cnl-interrupt: refine interrupt setting for change in irq_desc   Marcin Maka
• [Sound-open-firmware] [PATCH_V2 3/7] cnl-interrupt: refine interrupt setting for change in irq_desc   Liam Girdwood
• [Sound-open-firmware] [PATCH_V2 5/7] apl-interrupt: refine interrupt code according to interrupt change   Rander Wang
• [Sound-open-firmware] [PATCH_V3 0/8] interrupt refinement   Rander Wang
• [Sound-open-firmware] [PATCH_V3 1/8] interrupt: refine irq structure and algorithm   Rander Wang
• [Sound-open-firmware] [PATCH_V3 1/8] interrupt: refine irq structure and algorithm   Jie, Yang
• [Sound-open-firmware] [PATCH_V3 1/8] interrupt: refine irq structure and algorithm   Liam Girdwood
• [Sound-open-firmware] [PATCH_V3 1/8] interrupt: refine irq structure and algorithm   rander.wang
• [Sound-open-firmware] [PATCH_V3 1/8] interrupt refinement   Rander Wang
• [Sound-open-firmware] [PATCH_V3 2/8] interrupt: add irq id in IRQ   Rander Wang
• [Sound-open-firmware] [PATCH_V3 3/8] cpu: add file for getting cpu info   Rander Wang
• [Sound-open-firmware] [PATCH_V3 4/8] cnl-interrupt: refine interrupt setting for change in irq_desc   Rander Wang
• [Sound-open-firmware] [PATCH_V3 4/8] cnl-interrupt: refine interrupt setting for change in irq_desc   Jie, Yang
• [Sound-open-firmware] [PATCH_V3 4/8] cnl-interrupt: refine interrupt setting for change in irq_desc   Liam Girdwood
• [Sound-open-firmware] [PATCH_V3 4/8] cnl-interrupt: refine interrupt setting for change in irq_desc   rander.wang
• [Sound-open-firmware] [PATCH_V3 5/8] cnl-dma: remove special dma code for cnl   Rander Wang
• [Sound-open-firmware] [PATCH_V3 6/8] apl-interrupt: refine interrupt code according to interrupt change   Rander Wang
• [Sound-open-firmware] [PATCH_V3 7/8] byt-interrupt: port irq change to byt   Rander Wang
• [Sound-open-firmware] [PATCH_V3 8/8] hsw-interrupt: port irq change to hsw   Rander Wang
• [Sound-open-firmware] [PATCH v2 0/3] Host based component testing   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 0/7] Multiple DAI type support in topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 1/2] ASoC: SOF: set up volume tables with topology tlv data   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 1/2] ASoC: SOF: set up volume tables with topology tlv data   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH V2 1/2] mailbox: use mailbox function for SW_REG   Xiuli Pan
• [Sound-open-firmware] [PATCH V2 1/2] mailbox: use mailbox function for SW_REG   Pierre-Louis Bossart
• [Sound-open-firmware] [PATCH V2 1/2] mailbox: use mailbox function for SW_REG   Pan, Xiuli
• [Sound-open-firmware] [PATCH V2 1/2] mailbox: use mailbox function for SW_REG   Liam Girdwood
• [Sound-open-firmware] [PATCH v2 1/3] tune: add testbench common header and source files   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 1/3] tune: add testbench common header and source files   Liam Girdwood
• [Sound-open-firmware] [PATCH v2 1/3] tune: add testbench common header and source files   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 1/3] tune: add testbench common header and source files   Liam Girdwood
• [Sound-open-firmware] [PATCH v2 1/7] [RFC]topology: separate ssp params from dai common params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 2/2] ASoC: SOF: use updated volume gain tables in kcontrol IO handlers   Ranjani Sridharan
• [Sound-open-firmware] [PATCH V2 2/2] platform: panice: Send exception memory offset via IPC   Xiuli Pan
• [Sound-open-firmware] [PATCH v2 2/3] tune: new component for file IO   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 2/3] tune: new component for file IO   Liam Girdwood
• [Sound-open-firmware] [PATCH v2 2/3] tune: new component for file IO   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 2/3] tune: new component for file IO   Liam Girdwood
• [Sound-open-firmware] [PATCH v2 2/7] [RFC]topology: scripts: changes to accomodate different DAI types   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 3/3] tune: add testbench for volume comp   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 3/3] tune: add testbench for volume comp   Liam Girdwood
• [Sound-open-firmware] [PATCH v2 3/3] tune: add testbench for volume comp   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 3/7] [RFC]topology: add DMIC tokens   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 4/7] [RFC]topology: make m4 filenames dai type agnostic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 5/7] [RFC]topology: scripts: add dmic test topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 6/7] [RFC]topology: add DMIC config definition to DAI config   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2 7/7] [RFC]topology: add DMIC dai support in test capture m4   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2] [RFC]SOF: FIX: adjust the SSC3's TFT/RFT field in SSP   Wu Zhigang
• [Sound-open-firmware] [PATCH v2] [RFC]SOF: FIX: adjust the SSC3's TFT/RFT field in SSP   Liam Girdwood
• [Sound-open-firmware] [PATCH v2] topology:scripts: fix tplg build script to compile last topology when using xargs   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2] topology:scripts: fix tplg build script to compile last topology when using xargs   Liam Girdwood
• [Sound-open-firmware] [PATCH v2] topology:scripts: fix tplg build script to compile last topology when using xargs   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2] topology:scripts: fix tplg build script to compile last topology when using xargs   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2] topology: scripts: modify simple_test function to be generic and remove tone_test function   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2] topology: scripts: modify simple_test function to be generic and remove tone_test function   Liam Girdwood
• [Sound-open-firmware] [PATCH v2] topology: speed up topology build   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v2] topology: utility for visualizing topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 0/4] Host based component testing   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 0/4] Host based component testing   Liam Girdwood
• [Sound-open-firmware] [PATCH v3 0/7] Multiple DAI type support in topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 1/4] tune: add testbench common headers and source files   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 1/7] topology: separate ssp params from dai common params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 2/4] tune: new component for file IO   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 2/7] topology: scripts: changes to accomodate different DAI types   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 3/4] tune: add testbench to test topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 3/7] topology: add DMIC tokens   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 3/7] topology: add DMIC tokens   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH v3 3/7] topology: add DMIC tokens   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 4/4] tune: Add README and a script to configure testbench parameters   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 4/7] topology: make m4 filenames dai type agnostic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 5/7] topology: scripts: add dmic test topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 6/7] topology: add DMIC config definition to DAI config   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 7/7] topology: add DMIC dai support in test capture m4   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3 7/7] topology: add DMIC dai support in test capture m4   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH v3 7/7] topology: add DMIC dai support in test capture m4   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3] topology:scripts: fix tplg build script to compile last topology when using xargs   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3] topology:scripts: fix tplg build script to compile last topology when using xargs   Liam Girdwood
• [Sound-open-firmware] [PATCH v3] topology: speed up topology build   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v3] topology: speed up topology build   Liam Girdwood
• [Sound-open-firmware] [PATCH v4 0/7] Multiple DAI type support in topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 0/7] Multiple DAI type support in topology   Liam Girdwood
• [Sound-open-firmware] [PATCH v4 1/7] topology: separate ssp params from dai common params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 2/7] topology: scripts: changes to accommodate different DAI types   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 3/7] topology: add DMIC tokens   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 4/7] topology: make m4 filenames dai type agnostic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 5/7] topology: scripts: add dmic test topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 6/7] topology: add DMIC config definition to DAI config   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 7/7] topology: add DMIC dai support in test capture m4   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 7/7] topology: add DMIC dai support in test capture m4   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH v4 7/7] topology: add DMIC dai support in test capture m4   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v4 7/7] topology: add DMIC dai support in test capture m4   Liam Girdwood
• [Sound-open-firmware] [PATCH v4 7/7] topology: add DMIC dai support in test capture m4   Seppo Ingalsuo
• [Sound-open-firmware] [PATCH v5 0/7] Multiple DAI type support in topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v5 0/7] Multiple DAI type support in topology   Liam Girdwood
• [Sound-open-firmware] [PATCH v5 1/7] topology: scripts: changes to accommodate different DAI types   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v5 2/7] topology: separate ssp params from dai common params   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v5 3/7] topology: add DMIC tokens   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v5 4/7] topology: make m4 filenames dai type agnostic   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v5 5/7] topology: scripts: add dmic test topology   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v5 6/7] topology: add DMIC config definition to DAI config   Ranjani Sridharan
• [Sound-open-firmware] [PATCH v5 7/7] topology: add DMIC dai support in test capture m4   Ranjani Sridharan
• [Sound-open-firmware] [PTACH RFC 0/5] Add switch widget for loopback   Xiuli Pan
• [Sound-open-firmware] [PTACH RFC 0/5] Add switch widget for loopback   Pierre-Louis Bossart
• [Sound-open-firmware] [PTACH RFC 0/5] Add switch widget for loopback   Pan, Xiuli
• [Sound-open-firmware] [PTACH RFC 0/5] Add switch widget for loopback   Pierre-Louis Bossart
• [Sound-open-firmware] [PTACH RFC 0/5] Add switch widget for loopback   Ranjani Sridharan
• [Sound-open-firmware] [PTACH RFC 0/5] Add switch widget for loopback   Pierre-Louis Bossart
• [Sound-open-firmware] [PTACH RFC 5/5] topolog: test: add loopback test topology   Xiuli Pan
• [Sound-open-firmware] [PTACH RFC 5/5] topolog: test: add loopback test topology   Pan, Xiuli
• [Sound-open-firmware] [PTACH RFC 5/5] topolog: test: add loopback test topology   Ranjani Sridharan
• [Sound-open-firmware] [PTACH RFC 5/5] topolog: test: add loopback test topology   Keyon Jie
• [Sound-open-firmware] [RESEND][PATCH] topology: dai: add link_id for dai_link matching in DAI_CONFIG   Keyon Jie
• [Sound-open-firmware] [RESEND][PATCH] topology: dai: add link_id for dai_link matching in DAI_CONFIG   Liam Girdwood
• [Sound-open-firmware] [RFC PATCH 0/4] SSP fixes   Pierre-Louis Bossart
• [Sound-open-firmware] [RFC PATCH 0/4] SSP fixes   Liam Girdwood
• [Sound-open-firmware] [RFC PATCH 1/4] ssp: rename clk_id as mclk_id, remove dead code   Pierre-Louis Bossart
• [Sound-open-firmware] [RFC PATCH 1/5] topology: mixer: Add CONTROLMIXER_MIN   Xiuli Pan
• [Sound-open-firmware] [RFC PATCH 1/5] topology: mixer: Add CONTROLMIXER_MIN   Ranjani Sridharan
• [Sound-open-firmware] [RFC PATCH 1/5] topology: mixer: Add CONTROLMIXER_MIN   Pan, Xiuli
• [Sound-open-firmware] [RFC PATCH 2/4] apl-ssp: fix MCLK and BCLK source selection   Pierre-Louis Bossart
• [Sound-open-firmware] [RFC PATCH 2/5] topology: utils: Add kdapm macro for route with kcontrol   Xiuli Pan
• [Sound-open-firmware] [RFC PATCH 2/5] topology: utils: Add kdapm macro for route with kcontrol   Keyon Jie
• [Sound-open-firmware] [RFC PATCH 2/5] topology: utils: Add kdapm macro for route with kcontrol   Ranjani Sridharan
• [Sound-open-firmware] [RFC PATCH 2/5] topology: utils: Add kdapm macro for route with kcontrol   Pan, Xiuli
• [Sound-open-firmware] [RFC PATCH 3/4] byt-ssp: fixes for DSP modes   Pierre-Louis Bossart
• [Sound-open-firmware] [RFC PATCH 3/5] topology: m4: add switch widget   Xiuli Pan
• [Sound-open-firmware] [RFC PATCH 3/5] topology: m4: add switch widget   Ranjani Sridharan
• [Sound-open-firmware] [RFC PATCH 3/5] topology: m4: add switch widget   Pan, Xiuli
• [Sound-open-firmware] [RFC PATCH 3/5] topology: m4: add switch widget   Ranjani Sridharan
• [Sound-open-firmware] [RFC PATCH 4/4] byt-ssp: fix frame sync polarity for DSP modes   Pierre-Louis Bossart
• [Sound-open-firmware] [RFC PATCH 4/5] topology: sof: add pipeline loopback dai   Xiuli Pan
• [Sound-open-firmware] [RFC PATCH 4/5] topology: sof: add pipeline loopback dai   Keyon Jie
• [Sound-open-firmware] [RFC PATCH 4/5] topology: sof: add pipeline loopback dai   Pan, Xiuli
• [Sound-open-firmware] [RFC PATCH 5/5] topology: test: add loopback test topology   Xiuli Pan
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   Liam Girdwood
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   yanwang
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   Yan Wang
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   Yan Wang
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   Yan Wang
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   Ranjani Sridharan
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   Yan Wang
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   yanwang
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   Liam Girdwood
• [Sound-open-firmware] [RFC PATCH v2 00/29] Trace level control based on modules.   Yan Wang
• [Sound-open-firmware] [RFC PATCH v2 01/29] Define IPC message type and data structure for trace level.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 01/29] Define IPC message type and data structure for trace level.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 02/29] Add utility functions and variable for DMA trace level control.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 02/29] Add utility functions and variable for DMA trace level control.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 03/29] Add trace level variable and set function for SOF modules.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 03/29] Add trace level variable and set function for SOF modules.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 04/29] Add trace level IPC message processing logic.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 04/29] Add trace level IPC message processing logic.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 05/29] Change trace macro definition and API for trace level checking.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 05/29] Change trace macro definition and API for trace level checking.   Ranjani Sridharan
• [Sound-open-firmware] [RFC PATCH v2 05/29] Change trace macro definition and API for trace level checking.   Yan Wang
• [Sound-open-firmware] [RFC PATCH v2 05/29] Change trace macro definition and API for trace level checking.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 06/29] Change macro definition and trace calling for dma-trace.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 06/29] Change macro definition and trace calling for dma-trace.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 07/29] Change macro definition and trace calling for dma-copy.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 07/29] Change macro definition and trace calling for dma-copy.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 08/29] Change macro definition and trace calling for alloc.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 08/29] Change macro definition and trace calling for alloc.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 09/29] Change macro definition and trace calling for agent.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 09/29] Change macro definition and trace calling for agent.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 10/29] Change macro definition and trace calling for schdule module.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 10/29] Change macro definition and trace calling for schdule module.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 11/29] Change macro definition and trace calling for wait.h   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 11/29] Change macro definition and trace calling for wait.h   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 12/29] Change macro definition and trace calling for SSP.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 12/29] Change macro definition and trace calling for SSP.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 13/29] Change macro definition and trace calling for dw-dma.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 13/29] Change macro definition and trace calling for dw-dma.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 14/29] Change macro definition and trace calling for hda-dma.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 14/29] Change macro definition and trace calling for hda-dma.c   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 15/29] Change macro definition and trace calling for interrupt.h   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 15/29] Change macro definition and trace calling for interrupt.h   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 16/29] Change macro definition and trace calling for comp_dev.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 16/29] Change macro definition and trace calling for comp_dev.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 17/29] Change macro definition and trace calling for comp_buffer.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 17/29] Change macro definition and trace calling for comp_buffer.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 18/29] Change macro definition and trace calling for pipeline.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 18/29] Change macro definition and trace calling for pipeline.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 19/29] Change macro definition and trace calling for dai.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 19/29] Change macro definition and trace calling for dai.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 20/29] Change macro definition and trace calling for volume.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 20/29] Change macro definition and trace calling for volume.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 21/29] Change macro definition and trace calling for switch.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 21/29] Change macro definition and trace calling for switch.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 22/29] Change macro definition and trace calling for tone.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 22/29] Change macro definition and trace calling for tone.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 23/29] Change macro definition and trace calling for mixer.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 23/29] Change macro definition and trace calling for mixer.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 24/29] Change macro definition and trace calling for host.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 24/29] Change macro definition and trace calling for host.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 25/29] Change macro definition and trace calling for mux.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 25/29] Change macro definition and trace calling for mux.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 26/29] Change macro definition and trace calling for eq_fir.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 26/29] Change macro definition and trace calling for eq_fir.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 27/29] Change macro definition and trace calling for eq_iir.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 27/29] Change macro definition and trace calling for eq_iir.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 27/29] Change macro definition and trace calling for eq_iir.   Liam Girdwood
• [Sound-open-firmware] [RFC PATCH v2 27/29] Change macro definition and trace calling for eq_iir.   yanwang
• [Sound-open-firmware] [RFC PATCH v2 28/29] Change macro definition and trace calling for src.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 28/29] Change macro definition and trace calling for src.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 29/29] Change macro definition and trace calling for IPC.   yan.wang at linux.intel.com
• [Sound-open-firmware] [RFC PATCH v2 29/29] Change macro definition and trace calling for IPC.   yan.wang at linux.intel.com
• [Sound-open-firmware] about multiple BE dai_links support   Keyon Jie
• [Sound-open-firmware] about multiple BE dai_links support   Ranjani Sridharan
• [Sound-open-firmware] about multiple BE dai_links support   Keyon Jie
• [Sound-open-firmware] about multiple BE dai_links support   Pierre-Louis Bossart
• [Sound-open-firmware] about multiple BE dai_links support   Ranjani Sridharan
• [Sound-open-firmware] about multiple BE dai_links support   Liam Girdwood
• [Sound-open-firmware] about multiple BE dai_links support   Jie, Yang
• [Sound-open-firmware] about multiple BE dai_links support   Liam Girdwood
• [Sound-open-firmware] about multiple BE dai_links support   Jie, Yang
• [Sound-open-firmware] about multiple BE dai_links support   Pierre-Louis Bossart
• [Sound-open-firmware] about multiple BE dai_links support   Jie, Yang
• [Sound-open-firmware] about SOF 1.2 topology support   Keyon Jie
• [Sound-open-firmware] about SOF 1.2 topology support   Liam Girdwood
• [Sound-open-firmware] about SOF 1.2 topology support   Ranjani Sridharan
• [Sound-open-firmware] about SOF 1.2 topology support   Liam Girdwood
• [Sound-open-firmware] about SOF 1.2 topology support   Keyon Jie
• [Sound-open-firmware] about SOF 1.2 topology support   Keyon Jie
• [Sound-open-firmware] about SOF 1.2 topology support   Keyon Jie
• [Sound-open-firmware] about SOF 1.2 topology support   Liam Girdwood
• [Sound-open-firmware] about SOF 1.2 topology support   Keyon Jie
• [Sound-open-firmware] about SOF 1.2 topology support   Liam Girdwood
• [Sound-open-firmware] about SOF 1.2 topology support   Keyon Jie
• [Sound-open-firmware] Cannot fetch latest SOF code from http://git.alsa-project.org/http/sound-open-firmware.git   Lin, Mengdong
• [Sound-open-firmware] Cannot fetch latest SOF code from http://git.alsa-project.org/http/sound-open-firmware.git   Takashi Iwai
• [Sound-open-firmware] Cannot fetch latest SOF code from http://git.alsa-project.org/http/sound-open-firmware.git   Jaroslav Kysela
• [Sound-open-firmware] Cannot fetch latest SOF code from http://git.alsa-project.org/http/sound-open-firmware.git   Lin, Mengdong
• [Sound-open-firmware] Cannot fetch latest SOF code from http://git.alsa-project.org/http/sound-open-firmware.git   Lin, Mengdong
• [Sound-open-firmware] Cannot fetch latest SOF code from http://git.alsa-project.org/http/sound-open-firmware.git   Jaroslav Kysela
• [Sound-open-firmware] Cannot fetch latest SOF code from http://git.alsa-project.org/http/sound-open-firmware.git   Lin, Mengdong
• [Sound-open-firmware] Cannot fetch latest SOF code from http://git.alsa-project.org/http/sound-open-firmware.git   Jaroslav Kysela
• [Sound-open-firmware] Graceful exit during DSP exception   Ranjani Sridharan
• [Sound-open-firmware] Graceful exit during DSP exception   Liam Girdwood
• [Sound-open-firmware] Graceful exit during DSP exception   Ranjani Sridharan
• [Sound-open-firmware] Graceful exit during DSP exception   Pan, Xiuli
• [Sound-open-firmware] Graceful exit during DSP exception   Ranjani Sridharan
• [Sound-open-firmware] Graceful exit during DSP exception   Pan, Xiuli
• [Sound-open-firmware] Graceful exit during DSP exception   Liam Girdwood
• [Sound-open-firmware] how to find a suitable value for the TFT/RFT parameter on multi-platform   zhigangw
• [Sound-open-firmware] how to find a suitable value for the TFT/RFT parameter on multi-platform   Pierre-Louis Bossart
• [Sound-open-firmware] how to find a suitable value for the TFT/RFT parameter on multi-platform   zhigangw
• [Sound-open-firmware] how to find a suitable value for the TFT/RFT parameter on multi-platform   Pierre-Louis Bossart
• [Sound-open-firmware] how to find a suitable value for the TFT/RFT parameter on multi-platform   zhigangw
• [Sound-open-firmware] Introduce a module parameter to configure SOF driver debug output?   Lin, Mengdong
• [Sound-open-firmware] Introduce a module parameter to configure SOF driver debug output?   Lin, Mengdong
• [Sound-open-firmware] Introduce a module parameter to configure SOF driver debug output?   Pierre-Louis Bossart
• [Sound-open-firmware] Introduce a module parameter to configure SOF driver debug output?   Pierre-Louis Bossart
• [Sound-open-firmware] Introduce a module parameter to configure SOF driver debug output?   Yan Wang
• [Sound-open-firmware] Introduce a module parameter to configure SOF driver debug output?   Lin, Mengdong
• [Sound-open-firmware] Question about comp_register   Ranjani Sridharan
• [Sound-open-firmware] Question about comp_register   Liam Girdwood
• [Sound-open-firmware] test, sorry for inconvenience   Yan Wang
• [Sound-open-firmware] test, sorry for inconvenience   Wang, Yan

Last message date: Thu May 31 23:08:58 CEST 2018
Archived on: Thu May 31 23:09:10 CEST 2018

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...