[Sound-open-firmware] [PATCH v2] topology: speed up topology build

[Ranjani Sridharan]

Speed up topology with batch processing of m4 files

Signed-off-by: Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
---

Notes:
    v2: check for xargs in configure

 configure.ac                |  2 ++
 topology/test/Makefile.am   |  4 ++-
 topology/test/tplg-build.sh | 66 ++++++++++++++++++++++++++++++++-------------
 3 files changed, 52 insertions(+), 20 deletions(-)

diff --git a/configure.ac b/configure.ac
index b95c44c..cc5e59e 100644
--- a/configure.ac
+++ b/configure.ac
@@ -5,6 +5,8 @@ AM_INIT_AUTOMAKE([foreign])
 AC_CONFIG_SRCDIR([rmbox/rmbox.c])
 AC_CONFIG_HEADERS([config.h])
 AC_CHECK_HEADER([sof/uapi/abi.h])
+AC_CHECK_PROG([XARGS], xargs, "yes", "no", [$PATH])
+AM_CONDITIONAL(XARGS, test "$XARGS" = "yes")
 
 AC_CANONICAL_HOST
 
diff --git a/topology/test/Makefile.am b/topology/test/Makefile.am
index 61713f9..d494fcb 100644
--- a/topology/test/Makefile.am
+++ b/topology/test/Makefile.am
@@ -3,7 +3,9 @@
 # Dependencies
 #
 
-
+if XARGS
+export USE_XARGS=yes
+endif
 
 DEPS = \
 	../dsps/*.m4 \
diff --git a/topology/test/tplg-build.sh b/topology/test/tplg-build.sh
index 7c55fba..4cf652c 100755
--- a/topology/test/tplg-build.sh
+++ b/topology/test/tplg-build.sh
@@ -8,14 +8,14 @@
 set -e
 
 # M4 preprocessor flags
-M4_FLAGS="-I ../ -I ../m4 -I ../common"
+export M4PATH="../:../m4:../common"
 
 # Simple component test cases
 # can be used on components with 1 sink and 1 source.
 SIMPLE_TESTS=(test-ssp test-capture-ssp test-playback-ssp)
 TONE_TEST=test-tone-playback-ssp
-
-
+TEST_STRINGS=""
+M4_STRINGS=""
 # process m4 simple tests -
 # simple_test(name, pipe_name, be_name, format, dai_id, dai_format, dai_phy_bits, dai_data_bits dai_bclk)
 # 1) name - test filename suffix
@@ -35,21 +35,35 @@ function simple_test {
 	for i in ${SIMPLE_TESTS[@]}
 	do
 		TFILE="$i$5-${11}-$2-$4-$6-48k-$((${10} / 1000))k-$1"
-		echo "M4 pre-processing test $i -> ${TFILE}"
-		m4 ${M4_FLAGS} \
-			-DTEST_PIPE_NAME="$2" \
-			-DTEST_DAI_LINK_NAME="$3" \
-			-DTEST_SSP_PORT=$5 \
-			-DTEST_SSP_FORMAT=$6 \
-			-DTEST_PIPE_FORMAT=$4 \
-			-DTEST_SSP_BCLK=$9 \
-			-DTEST_SSP_MCLK=${10} \
-			-DTEST_SSP_PHY_BITS=$7 \
-			-DTEST_SSP_DATA_BITS=$8 \
-			-DTEST_SSP_MODE=${11} \
-			$i.m4 > ${TFILE}.conf
-		echo "Compiling test $i -> ${TFILE}.tplg"
-		alsatplg -v 1 -c ${TFILE}.conf -o ${TFILE}.tplg
+		if [ "$USE_XARGS" == "yes" ]
+		then
+			#create input string for batch m4 processing
+			M4_STRINGS+="-DTEST_PIPE_NAME=$2,-DTEST_DAI_LINK_NAME=$3\
+				-DTEST_SSP_PORT=$5,-DTEST_SSP_FORMAT=$6\
+				-DTEST_PIPE_FORMAT=$4,-DTEST_SSP_BCLK=$9\
+				-DTEST_SSP_MCLK=${10},-DTEST_SSP_PHY_BITS=$7\
+				-DTEST_SSP_DATA_BITS=$8,-DTEST_SSP_MODE=${11}\
+				$i.m4,${TFILE},"
+			#create input string for batch processing of conf files
+			TEST_STRINGS+=${TFILE}","
+		else
+			echo "M4 pre-processing test $i -> ${TFILE}"
+			m4 ${M4_FLAGS} \
+				-DTEST_PIPE_NAME="$2" \
+				-DTEST_DAI_LINK_NAME="$3" \
+				-DTEST_SSP_PORT=$5 \
+				-DTEST_SSP_FORMAT=$6 \
+				-DTEST_PIPE_FORMAT=$4 \
+				-DTEST_SSP_BCLK=$9 \
+				-DTEST_SSP_MCLK=${10} \
+				-DTEST_SSP_PHY_BITS=$7 \
+				-DTEST_SSP_DATA_BITS=$8 \
+				-DTEST_SSP_MODE=${11} \
+				$i.m4 > ${TFILE}.conf
+			echo "Compiling test $i -> ${TFILE}.tplg"
+			alsatplg -v 1 -c ${TFILE}.conf -o ${TFILE}.tplg
+		fi
+
 	done
 }
 
@@ -69,7 +83,7 @@ function simple_test {
 function tone_test {
 	TFILE="$TONE_TEST$5-$2-$4-$6-48k-$1"
 	echo "M4 pre-processing test $TONE_TEST -> ${TFILE}"
-	m4 ${M4_FLAGS} \
+	m4 \
 		-DTEST_PIPE_NAME="$2" \
 		-DTEST_DAI_LINK_NAME="$3" \
 		-DTEST_SSP_PORT=$5 \
@@ -84,6 +98,8 @@ function tone_test {
 	alsatplg -v 1 -c ${TFILE}.conf -o ${TFILE}.tplg
 }
 
+echo "Preparing topology build input..."
+
 # Pre-process the simple tests
 simple_test nocodec passthrough "NoCodec" s16le 2 s16le 20 16 1920000 19200000 I2S
 simple_test nocodec passthrough "NoCodec" s24le 2 s24le 25 24 2400000 19200000 I2S
@@ -166,4 +182,16 @@ simple_test nocodec src "NoCodec" s24le 4 s24le 25 24 2400000 24000000 I2S
 # Tone test: Tone component only supports s32le currently
 tone_test codec tone "SSP2-Codec" s32le 2 s16le 20 16 1920000 19200000
 
+if [ "$USE_XARGS" == "yes" ]
+then
+	echo "Batch processing m4 files..."
+	M4_STRINGS=${M4_STRINGS%?};
+	#m4 processing
+	#echo $M4_STRINGS | tr " " "," | tr '\n' '\0' | xargs -d ',' -n12 -P10 bash -c 'echo "${@:1:${#}-1} > ${12}.conf"' m4
+	echo $M4_STRINGS | tr " " "," | tr '\n' '\0' | xargs -d ',' -n12 -P10 bash -c 'm4 "${@:1:${#}-1}" > ${12}.conf' m4
+
+	#execute alsatplg to create topology binary
+	TEST_STRINGS=${TEST_STRINGS%?}
+	echo $TEST_STRINGS | tr '\n' '\0' | xargs -d ',' -n1 -P10 -I string alsatplg -v 1 -c string".conf" -o string".tplg"
+fi
 
-- 
2.14.1