[Sound-open-firmware] [PTACH RFC 0/5] Add switch widget for loopback
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Thu May 31 14:55:49 CEST 2018
On 5/30/18 9:08 PM, Pan, Xiuli wrote:
>
>
> On 5/30/2018 21:06, Pierre-Louis Bossart wrote:
>> On 5/30/18 4:51 AM, Xiuli Pan wrote:
>>> From: Pan Xiuli <xiuli.pan at linux.intel.com>
>>>
>>> Have some clean up for the code may used.
>>> Add some macros that are needed for the switch widget.
>>> TODO: Have the useable get/put function for the kcontrol.
>>>
>>> Pan Xiuli (5):
>>> topology: mixer: Add CONTROLMIXER_MIN
>>> topology: utils: Add kdapm macro for route with kcontrol
>>> topology: m4: add switch widget
>>> topology: sof: add pipeline loopback dai
>>> topology: test: add loopback test topology
>>
>> What do you mean by "loopback"?
>> a) enabling capture on SSP with hardware LBM (LoopBackMode) -
>> mirroring the playback data?
>> b) enabling a capture-to-playback hostless pipeline - mirroring the
>> capture data?
> I think the it should be the a). This will try to enable SSP driver
> loopback mode with a kcontrol.
Not sure if it's wise to expose a kcontrol to users for what is largely
a test capability - not to mention that you will not typically turn this
on/off dynamically.
I'd suggest looking into using the topology+IPC to enable such custom tests.
> Maybe we can try to make the b) also work.
>
> Thanks
> Xiuli
>>
>>
>>>
>>> topology/m4/mixercontrol.m4 | 16 ++++--
>>> topology/m4/switch.m4 | 46 +++++++++++++++
>>> topology/m4/utils.m4 | 4 ++
>>> topology/sof/pipe-dai-loopback.m4 | 36 ++++++++++++
>>> topology/sof/pipe-low-latency-capture.m4 | 3 +-
>>> topology/sof/pipe-low-latency-playback.m4 | 2 +
>>> topology/sof/pipe-pcm-media.m4 | 1 +
>>> topology/sof/pipe-tone.m4 | 2 +
>>> topology/sof/pipe-volume-capture.m4 | 1 +
>>> topology/sof/pipe-volume-playback.m4 | 1 +
>>> topology/test/test-loopback-ssp.m4 | 94
>>> +++++++++++++++++++++++++++++++
>>> topology/test/tplg-build.sh | 2 +-
>>> 12 files changed, 201 insertions(+), 7 deletions(-)
>>> create mode 100644 topology/m4/switch.m4
>>> create mode 100644 topology/sof/pipe-dai-loopback.m4
>>> create mode 100644 topology/test/test-loopback-ssp.m4
>>>
>>
>
> _______________________________________________
> Sound-open-firmware mailing list
> Sound-open-firmware at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/sound-open-firmware
More information about the Sound-open-firmware
mailing list