[Sound-open-firmware] Request to create a tag for https://github.com/01org/osadsp-crosstool-ng

[Wang, Long1]

OK. There are configure files as below. Is there missing for config-byt-gcc7.3-gdb7.11.2-binutils2.30?
config-apl-gcc7.3-gdb7.12.1
config-byt-gcc7.3-gdb7.12.1
config-cnl-gcc7.3-gdb7.12.1
config-hsw-gcc7.3-gdb7.12.1

-----Original Message-----
From: Liam Girdwood [mailto:liam.r.girdwood at linux.intel.com] 
Sent: Thursday, June 14, 2018 10:04 PM
To: Wang, Long1 <long1.wang at intel.com>; Pan, Xiuli <xiuli.pan at linux.intel.com>; Keyon Jie <yang.jie at linux.intel.com>; sound-open-firmware at alsa-project.org
Cc: Li, Jocelyn <jocelyn.li at linux.intel.com>
Subject: Re: [Sound-open-firmware] Request to create a tag for https://github.com/01org/osadsp-crosstool-ng

On Thu, 2018-06-14 at 07:18 +0000, Wang, Long1 wrote:
> Hi Girdwood,
> 
> Could you push all built-out binary of the cross complier into the tar ball?
> It should include xtensa-byt-elf, xtensa-bxt-elf etc.
> 

We are not going to do any binary releases of the compiler.

Can you update crosstool-ng and xtensa-overlay from sofproject (and use sof-
gcc7.3 branches for both).

Please then run within crosstool-ng :-

./bootstrap
./configure --prefix=`pwd`
make
make install

and then each GCC version can be built using :-
 
cp config-byt-gcc7.3-gdb7.11.2-binutils2.30 .config ./ct-ng build

Please note there is a different config for each compiler version.

Thanks

Liam