February 2017 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Feb 7 15:02:47 CET 2017
Ending: Wed Feb 22 03:42:53 CET 2017
Messages: 134

• [Sound-open-firmware] [PATCH 00/25] add R/W pointers check for pipeline buffers   Keyon Jie
  • [Sound-open-firmware] [PATCH 01/25] host: handle more possibility for playback spitting   Keyon Jie
  • [Sound-open-firmware] [PATCH 02/25] dai: reset dai_pos at MMAP_PPOS command   Keyon Jie
  • [Sound-open-firmware] [PATCH 03/25] pipleline: op_sink: don't need clear the buffer for each prepare   Keyon Jie
  • [Sound-open-firmware] [PATCH 04/25] host: start: don't real start for start command   Keyon Jie
  • [Sound-open-firmware] [PATCH 05/25] ipc: presentation_posn should be uint64_t type   Keyon Jie
  • [Sound-open-firmware] [PATCH 06/25] intel-ipc: add application buffer pointer update from host side   Keyon Jie
    • [Sound-open-firmware] [PATCH 06/25] intel-ipc: add application buffer pointer update from host side   Liam Girdwood
      • [Sound-open-firmware] [PATCH 06/25] intel-ipc: add application buffer pointer update from host side   Jie, Yang
  • [Sound-open-firmware] [PATCH 07/25] intel-ipc: add stream operation IPC_INTEL_STR_STOP   Keyon Jie
  • [Sound-open-firmware] [PATCH 08/25] host: add host_update_buffer for produce and consume   Keyon Jie
    • [Sound-open-firmware] [PATCH 08/25] host: add host_update_buffer for produce and consume   Liam Girdwood
      • [Sound-open-firmware] [PATCH 08/25] host: add host_update_buffer for produce and consume   Jie, Yang
  • [Sound-open-firmware] [PATCH 09/25] host: rename host_pos_blks to host_pos_read   Keyon Jie
  • [Sound-open-firmware] [PATCH 10/25] host: for the last bytes/period, send read notification later   Keyon Jie
  • [Sound-open-firmware] [PATCH 11/25] host: add R/W pointers check for playback   Keyon Jie
  • [Sound-open-firmware] [PATCH 12/25] host: add a completion work to notify host side   Keyon Jie
  • [Sound-open-firmware] [PATCH 13/25] host: reset pointers at new() and reset()   Keyon Jie
  • [Sound-open-firmware] [PATCH 14/25] host: cleanup host_cmd() cases   Keyon Jie
    • [Sound-open-firmware] [PATCH 14/25] host: cleanup host_cmd() cases   Liam Girdwood
      • [Sound-open-firmware] [PATCH 14/25] host: cleanup host_cmd() cases   Jie, Yang
  • [Sound-open-firmware] [PATCH 15/25] host: host_copy: only copy when there is data and wait until finish   Keyon Jie
  • [Sound-open-firmware] [PATCH 16/25] volume: volume_params(): set the sink buffer params depending on its sink   Keyon Jie
    • [Sound-open-firmware] [PATCH 16/25] volume: volume_params(): set the sink buffer params depending on its sink   Liam Girdwood
      • [Sound-open-firmware] [PATCH 16/25] volume: volume_params(): set the sink buffer params depending on its sink   Jie, Yang
  • [Sound-open-firmware] [PATCH 17/25] component: status: rename COMP_STATE_STOPPED to COMP_STATE_SETUP   Keyon Jie
    • [Sound-open-firmware] [PATCH 17/25] component: status: rename COMP_STATE_STOPPED to COMP_STATE_SETUP   Liam Girdwood
      • [Sound-open-firmware] [PATCH 17/25] component: status: rename COMP_STATE_STOPPED to COMP_STATE_SETUP   Jie, Yang
  • [Sound-open-firmware] [PATCH 18/25] volume: volume_cmd(): only stop/pause at running   Keyon Jie
    • [Sound-open-firmware] [PATCH 18/25] volume: volume_cmd(): only stop/pause at running   Liam Girdwood
      • [Sound-open-firmware] [PATCH 18/25] volume: volume_cmd(): only stop/pause at running   Jie, Yang
      • [Sound-open-firmware] [PATCH 18/25] volume: volume_cmd(): only stop/pause at running   Liam Girdwood
  • [Sound-open-firmware] [PATCH 19/25] volume: add R/W pointer check for volume_copy()   Keyon Jie
  • [Sound-open-firmware] [PATCH 20/25] mixer: mixer_params(): set the sink buffer params to STREAM_FORMAT_S32_LE.   Keyon Jie
  • [Sound-open-firmware] [PATCH 21/25] mixer: add R/W pointer check for mixer_copy()   Keyon Jie
    • [Sound-open-firmware] [PATCH 21/25] mixer: add R/W pointer check for mixer_copy()   Liam Girdwood
      • [Sound-open-firmware] [PATCH 21/25] mixer: add R/W pointer check for mixer_copy()   Jie, Yang
  • [Sound-open-firmware] [PATCH 22/25] mixer: add dd->last_bytes for the last bytes(< period) caculation   Keyon Jie
  • [Sound-open-firmware] [PATCH 23/25] dai: add R/W pointer check for dai copy   Keyon Jie
    • [Sound-open-firmware] [PATCH 23/25] dai: add R/W pointer check for dai copy   Liam Girdwood
      • [Sound-open-firmware] [PATCH 23/25] dai: add R/W pointer check for dai copy   Jie, Yang
  • [Sound-open-firmware] [PATCH 24/25] dw-dma: handle different cases in irq handler   Keyon Jie
    • [Sound-open-firmware] [PATCH 24/25] dw-dma: handle different cases in irq handler   Liam Girdwood
  • [Sound-open-firmware] [PATCH 25/25] component: host/volume/mixer: reset buffers for stop cmd   Keyon Jie
    • [Sound-open-firmware] [PATCH 25/25] component: host/volume/mixer: reset buffers for stop cmd   Liam Girdwood
      • [Sound-open-firmware] [PATCH 25/25] component: host/volume/mixer: reset buffers for stop cmd   Jie, Yang
      • [Sound-open-firmware] [PATCH 25/25] component: host/volume/mixer: reset buffers for stop cmd   Liam Girdwood
• [Sound-open-firmware] [PATCH v2 00/26] add R/W pointers check for pipeline buffers   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 03/26] pipleline: op_sink: don't need clear the buffer for each prepare   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 04/26] host: start: don't real start for start command   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 05/26] ipc: presentation_posn should be uint64_t type   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 06/26] intel-ipc: add application buffer pointer update from host side   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 07/26] intel-ipc: add stream operation IPC_INTEL_STR_STOP   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 08/26] host: add host_update_buffer for produce and consume   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 09/26] host: rename host_pos_blks to host_pos_read   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 10/26] host: for the last bytes/period, send read notification later   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 11/26] host: add R/W pointers check for playback   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 12/26] host: add a completion work to notify host side   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 13/26] host: reset pointers at new() and reset()   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 14/26] host: cleanup host_cmd() cases   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 15/26] host: host_copy: only copy when there is data and wait until finish   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 16/26] volume: volume_params(): set the sink buffer params depending on its sink   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 17/26] component: status: rename COMP_STATE_STOPPED to COMP_STATE_SETUP   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 18/26] volume: volume_cmd(): only stop/pause at running   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 19/26] volume: add R/W pointer check for volume_copy()   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 20/26] mixer: mixer_params(): set the sink buffer params to STREAM_FORMAT_S32_LE.   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 21/26] mixer: add R/W pointer check for mixer_copy()   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 22/26] mixer: add dd->last_bytes for the last bytes(< period) caculation   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 23/26] dai: add R/W pointer check for dai copy   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 24/26] dw-dma: handle different cases in irq handler   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 25/26] component: host/volume/mixer: reset buffers for stop cmd   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 26/26] host: create host_elements_reset() and host_pointer_reset() for common use   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 00/26] add R/W pointers check for pipeline buffers   Liam Girdwood
    • [Sound-open-firmware] [PATCH v2 00/26] add R/W pointers check for pipeline buffers   Jie, Yang
• [Sound-open-firmware] [PATCH v2 01/26] host: handle more possibility for playback spitting   Keyon Jie
• [Sound-open-firmware] [PATCH v2 02/26] dai: reset dai_pos at MMAP_PPOS command   Keyon Jie
• [Sound-open-firmware] [PATCH] pipeline: Add support for full pipeline pre-loading.   Keyon Jie
• [Sound-open-firmware] [PATCH v3 00/27] add R/W pointers check for pipeline buffers   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 01/27] host: handle more possibility for playback spitting   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 02/27] dai: reset dai_pos at MMAP_PPOS command   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 03/27] pipleline: op_sink: don't need clear the buffer for each prepare   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 04/27] host: start: don't real start for start command   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 05/27] ipc: presentation_posn should be uint64_t type   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 06/27] intel-ipc: add application buffer pointer update from host side   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 07/27] intel-ipc: add stream operation IPC_INTEL_STR_STOP   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 08/27] host: add host_update_buffer for produce and consume   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 09/27] host: rename host_pos_blks to host_pos_read   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 10/27] host: for the last bytes/period, send read notification later   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 11/27] host: add R/W pointers check for playback   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 12/27] host: add a completion work to notify host side   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 13/27] host: reset pointers at new() and reset()   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 14/27] host: cleanup host_cmd() cases   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 15/27] host: host_copy: only copy when there is data and wait until finish   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 16/27] volume: volume_params(): set the sink buffer params depending on its sink   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 17/27] component: status: rename COMP_STATE_STOPPED to COMP_STATE_SETUP   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 18/27] volume: volume_cmd(): only stop/pause at running   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 19/27] volume: add R/W pointer check for volume_copy()   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 20/27] mixer: mixer_params(): set the sink buffer params to STREAM_FORMAT_S32_LE.   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 21/27] mixer: add R/W pointer check for mixer_copy()   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 22/27] mixer: add dd->last_bytes for the last bytes(< period) caculation   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 23/27] dai: add R/W pointer check for dai copy   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 24/27] dw-dma: handle different cases in irq handler   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 25/27] component: host/volume/mixer: reset buffers for stop cmd   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 26/27] host: create host_elements_reset() and host_pointer_reset() for common use   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 27/27] pipeline: Add support for full pipeline pre-loading.   Keyon Jie
  • [Sound-open-firmware] [PATCH v3 00/27] add R/W pointers check for pipeline buffers   Pierre-Louis Bossart
    • [Sound-open-firmware] [PATCH v3 00/27] add R/W pointers check for pipeline buffers   Keyon Jie
      • [Sound-open-firmware] [PATCH v3 00/27] add R/W pointers check for pipeline buffers   Keyon Jie
      • [Sound-open-firmware] [PATCH v3 00/27] add R/W pointers check for pipeline buffers   Pierre-Louis Bossart
      • [Sound-open-firmware] [PATCH v3 00/27] add R/W pointers check for pipeline buffers   Pierre-Louis Bossart
      • [Sound-open-firmware] [PATCH v3 00/27] add R/W pointers check for pipeline buffers   Jie, Yang
  • [Sound-open-firmware] [PATCH v3 00/27] add R/W pointers check for pipeline buffers   Liam Girdwood
• [Sound-open-firmware] [PATCH] host: fix an uninitialized warning issue   Keyon Jie
  • [Sound-open-firmware] [PATCH] host: fix an uninitialized warning issue   Liam Girdwood
• [Sound-open-firmware] [PATCH 0/5] Fix capture doesn't work issue   Keyon Jie
  • [Sound-open-firmware] [PATCH 1/5] component: set source buffer params for capture component .params()   Keyon Jie
  • [Sound-open-firmware] [PATCH 2/5] host: only update host_avail and host_free in host_update_buffer_xx()   Keyon Jie
  • [Sound-open-firmware] [PATCH 3/5] host: host_copy(): add handle for capture   Keyon Jie
    • [Sound-open-firmware] [PATCH 3/5] host: host_copy(): add handle for capture   Liam Girdwood
      • [Sound-open-firmware] [PATCH 3/5] host: host_copy(): add handle for capture   Jie, Yang
    • [Sound-open-firmware] [PATCH 3/5] host: host_copy(): add handle for capture   Ughreja, Rakesh A
      • [Sound-open-firmware] [PATCH 3/5] host: host_copy(): add handle for capture   Jie, Yang
  • [Sound-open-firmware] [PATCH 4/5] host: rename host_pos_read to host_pos_local and update comments   Keyon Jie
    • [Sound-open-firmware] [PATCH 4/5] host: rename host_pos_read to host_pos_local and update comments   Liam Girdwood
      • [Sound-open-firmware] [PATCH 4/5] host: rename host_pos_read to host_pos_local and update comments   Jie, Yang
  • [Sound-open-firmware] [PATCH 5/5] host: integrate consume and produce to host_update_buffer and fix for capture   Keyon Jie
• [Sound-open-firmware] [PATCH v2 0/5] Fix capture doesn't work issue   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 1/5] component: set source buffer params for capture component .params()   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 2/5] host: only update host_avail and host_free in host_update_buffer_xx()   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 3/5] host: host_copy(): add handle for capture   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 4/5] host: change host buffer pointer to w_ptr/r_ptr and update comments   Keyon Jie
    • [Sound-open-firmware] [PATCH v2 4/5] host: change host buffer pointer to w_ptr/r_ptr and update comments   Liam Girdwood
      • [Sound-open-firmware] [PATCH v2 4/5] host: change host buffer pointer to w_ptr/r_ptr and update comments   Keyon Jie
  • [Sound-open-firmware] [PATCH v2 5/5] host: integrate consume and produce to host_update_buffer   Keyon Jie

Last message date: Wed Feb 22 03:42:53 CET 2017
Archived on: Wed Feb 22 03:43:02 CET 2017

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...