[PATCH 2/2] ASoC: cs42l42: free_irq() before powering-down on probe() fail
Richard Fitzgerald
rf at opensource.cirrus.com
Tue Oct 26 14:57:22 CEST 2021
Relying on devm to free the irq handler on probe failure leaves a
small window of opportunity for an interrupt to become pending and
then the handler to run after the chip has been reset and powered
off.
For safety cs42l42_probe() should free the irq in the error path.
As the irq is now disabled by the driver in probe() and remove()
there is no point allocating it as a devres-managed item, so
convert to plain non-devres.
Signed-off-by: Richard Fitzgerald <rf at opensource.cirrus.com>
---
sound/soc/codecs/cs42l42.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index dc12842ee6e1..1029f6b3eb48 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -2078,17 +2078,16 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
/* Request IRQ if one was specified */
if (i2c_client->irq) {
- ret = devm_request_threaded_irq(&i2c_client->dev,
- i2c_client->irq,
- NULL, cs42l42_irq_thread,
- IRQF_ONESHOT | IRQF_TRIGGER_LOW,
- "cs42l42", cs42l42);
+ ret = request_threaded_irq(i2c_client->irq,
+ NULL, cs42l42_irq_thread,
+ IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+ "cs42l42", cs42l42);
if (ret == -EPROBE_DEFER) {
- goto err_disable;
+ goto err_disable_noirq;
} else if (ret != 0) {
dev_err(&i2c_client->dev,
"Failed to request IRQ: %d\n", ret);
- goto err_disable;
+ goto err_disable_noirq;
}
}
@@ -2158,6 +2157,10 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
regmap_write(cs42l42->regmap, CS42L42_PWR_CTL1, 0xff);
err_disable:
+ if (i2c_client->irq)
+ free_irq(i2c_client->irq, cs42l42);
+
+err_disable_noirq:
gpiod_set_value_cansleep(cs42l42->reset_gpio, 0);
err_disable_noreset:
regulator_bulk_disable(ARRAY_SIZE(cs42l42->supplies),
@@ -2170,7 +2173,7 @@ static int cs42l42_i2c_remove(struct i2c_client *i2c_client)
struct cs42l42_private *cs42l42 = i2c_get_clientdata(i2c_client);
if (i2c_client->irq)
- devm_free_irq(&i2c_client->dev, i2c_client->irq, cs42l42);
+ free_irq(i2c_client->irq, cs42l42);
/*
* The driver might not have control of reset and power supplies,
--
2.11.0
More information about the Alsa-devel
mailing list