[PATCH v2 3/6] ASoC: codecs: lpass-wsa-macro: add dapm widgets and route
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Tue Nov 3 13:31:35 CET 2020
On 29/10/2020 15:52, Pierre-Louis Bossart wrote:
>
>> +static int wsa_macro_enable_mix_path(struct snd_soc_dapm_widget *w,
>> + struct snd_kcontrol *kcontrol, int event)
>> +{
>> + struct snd_soc_component *component =
>> snd_soc_dapm_to_component(w->dapm);
>> + u16 gain_reg;
>> + int offset_val = 0;
>> + int val = 0;
>> +
>> + switch (w->reg) {
>> + case CDC_WSA_RX0_RX_PATH_MIX_CTL:
>> + gain_reg = CDC_WSA_RX0_RX_VOL_MIX_CTL;
>> + break;
>> + case CDC_WSA_RX1_RX_PATH_MIX_CTL:
>> + gain_reg = CDC_WSA_RX1_RX_VOL_MIX_CTL;
>> + break;
>> + default:
>> + return 0;
>> + }
>> +
>> + switch (event) {
>> + case SND_SOC_DAPM_POST_PMU:
>> + val = snd_soc_component_read(component, gain_reg);
>> + val += offset_val;
>> + snd_soc_component_write(component, gain_reg, val);
>
> missed from v1: offset_val is zero so the sequence is reading and
> writing the same thing. Is this intentional or useful?
Its useless, I should get rid of offset_val!
>
>> + break;
>> + case SND_SOC_DAPM_POST_PMD:
>> + snd_soc_component_update_bits(component, w->reg,
>> + CDC_WSA_RX_PATH_MIX_CLK_EN_MASK,
>> + CDC_WSA_RX_PATH_MIX_CLK_DISABLE);
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
>
> [...]
>
>> +static bool wsa_macro_adie_lb(struct snd_soc_component *component,
>> + int interp_idx)
>> +{
>> + u16 int_mux_cfg0 = 0, int_mux_cfg1 = 0;
>
> these inits are ignored
>
>> + u8 int_mux_cfg0_val = 0, int_mux_cfg1_val = 0;
>
> these as well
>
>> + u8 int_n_inp0 = 0, int_n_inp1 = 0, int_n_inp2 = 0;
>
> and these are also ignored.
>
Yes, these are ignored, I should have removed the unnecessary
initialization!
It would have been nice if sparse could catch such errors!
are you using tool to catch these?
--srini
>> + int_mux_cfg0 = CDC_WSA_RX_INP_MUX_RX_INT0_CFG0 + interp_idx * 8;
>> + int_mux_cfg1 = int_mux_cfg0 + 4;
>> + int_mux_cfg0_val = snd_soc_component_read(component, int_mux_cfg0);
>> + int_mux_cfg1_val = snd_soc_component_read(component, int_mux_cfg1);
>> +
>> + int_n_inp0 = int_mux_cfg0_val & 0x0F;
>> + if (int_n_inp0 == INTn_1_INP_SEL_DEC0 ||
>> + int_n_inp0 == INTn_1_INP_SEL_DEC1)
>> + return true;
>> +
>> + int_n_inp1 = int_mux_cfg0_val >> 4;
>> + if (int_n_inp1 == INTn_1_INP_SEL_DEC0 ||
>> + int_n_inp1 == INTn_1_INP_SEL_DEC1)
>> + return true;
>> +
>> + int_n_inp2 = int_mux_cfg1_val >> 4;
>> + if (int_n_inp2 == INTn_1_INP_SEL_DEC0 ||
>> + int_n_inp2 == INTn_1_INP_SEL_DEC1)
>> + return true;
>> +
>> + return false;
>> +}
>
More information about the Alsa-devel
mailing list