[PATCH v2 2/3] ASoC: tlv320adcx140: Add device tree property for PDM edges

[Ricard Wanderlof]

On Wed, 13 May 2020, Dan Murphy wrote:

> Add a device tree property to configure the PDM sampling edge for each
> digital microphone.
> 
> CC: Rob Herring <robh at kernel.org>
> Signed-off-by: Dan Murphy <dmurphy at ti.com>
> ---
>  .../devicetree/bindings/sound/tlv320adcx140.yaml   | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> index ab2268c0ee67..55668c7d261d 100644
> --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> @@ -63,6 +63,19 @@ properties:
>        - $ref: /schemas/types.yaml#/definitions/uint32
>        - enum: [0, 1, 2]
>  
> +  ti,pdm-edge-select:
> +    description: |
> +       Defines the sampling edge configuration for the PDM inputs.  This is
> an
> +       array defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>. 0 (default) is
> negative
> +       sampling edge and 1 is positive sampling edge.

A bit of a nitpick, but I would think of the edges as 
negative-going/positive-going, or rising/falling. Not sure if anyone would 
misunderstand 'negative edge' in practice though.

> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +      - minItems: 1
> +        maxItems: 4
> +        items:
> +          maximum: 1
> +        default: [0, 0, 0, 0]
> +
>  required:
>    - compatible
>    - reg
> @@ -77,6 +90,7 @@ examples:
>          compatible = "ti,tlv320adc5140";
>          reg = <0x4c>;
>          ti,mic-bias-source = <6>;
> +        ti,pdm-edge-select = < 0 1 0 1>;

Should there really be a space between < and 0 ?

/Ricard
-- 
Ricard Wolf Wanderlof                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30