[PATCH v2 2/3] ASoC: tlv320adcx140: Add device tree property for PDM edges

[Dan Murphy]

Add a device tree property to configure the PDM sampling edge for each
digital microphone.

CC: Rob Herring <robh at kernel.org>
Signed-off-by: Dan Murphy <dmurphy at ti.com>
---
 .../devicetree/bindings/sound/tlv320adcx140.yaml   | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index ab2268c0ee67..55668c7d261d 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -63,6 +63,19 @@ properties:
       - $ref: /schemas/types.yaml#/definitions/uint32
       - enum: [0, 1, 2]
 
+  ti,pdm-edge-select:
+    description: |
+       Defines the sampling edge configuration for the PDM inputs.  This is an
+       array defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>. 0 (default) is negative
+       sampling edge and 1 is positive sampling edge.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 4
+        items:
+          maximum: 1
+        default: [0, 0, 0, 0]
+
 required:
   - compatible
   - reg
@@ -77,6 +90,7 @@ examples:
         compatible = "ti,tlv320adc5140";
         reg = <0x4c>;
         ti,mic-bias-source = <6>;
+        ti,pdm-edge-select = < 0 1 0 1>;
         reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
       };
     };
-- 
2.26.2