[PATCH 2/3] bindings: sound: Add documentation for TI j721e EVM (CPB and IVI)

[Peter Ujfalusi]

Rob,

On 20/03/2020 2.21, Rob Herring wrote:
> On Thu, 19 Mar 2020 11:28:14 +0200, Peter Ujfalusi wrote:
>> The audio support on the Common Processor Board board is using
>> pcm3168a codec connected to McASP10 serializers in parallel setup.
>>
>> The Infotainment board plugs into the Common Processor Board, the support
>> of the extension board is extending the CPB audio support by adding
>> the two codecs on the expansion board.
>>
>> The audio support on the Infotainment Expansion Board consists of McASP0
>> connected to two pcm3168a codecs with dedicated set of serializers to each.
>> The SCKI for pcm3168a is sourced from j721e AUDIO_REFCLK0 pin.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
>> ---
>>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  93 +++++++++++
>>  .../sound/ti,j721e-cpb-ivi-audio.yaml         | 145 ++++++++++++++++++
>>  2 files changed, 238 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
>>  create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
>>
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml: $id: relative path/filename doesn't match actual path or filename
> 	expected: http://devicetree.org/schemas/sound/ti,j721e-cpb-ivi-audio.yaml#
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml: duplicate '$id' value 'http://devicetree.org/schemas/sound/ti,j721e-cpb-audio.yaml#'
> Error: Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dts:21.23-24 syntax error
> FATAL ERROR: Unable to parse input tree
> scripts/Makefile.lib:311: recipe for target 'Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dt.yaml' failed
> make[1]: *** [Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dt.yaml] Error 1
> make[1]: *** Waiting for unfinished jobs....
> Makefile:1262: recipe for target 'dt_binding_check' failed
> make: *** [dt_binding_check] Error 2

I made copy-paste error (two) when creating the cpb-ivi yaml and forgot
to re-run the dt_binding_check

Fixed up and verified that the build is clean now.

> See https://patchwork.ozlabs.org/patch/1258054
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
> 
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
> 
> Please check and re-submit.
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki