[PATCH 2/3] bindings: sound: Add documentation for TI j721e EVM (CPB and IVI)

[Rob Herring]

On Thu, 19 Mar 2020 11:28:14 +0200, Peter Ujfalusi wrote:
> The audio support on the Common Processor Board board is using
> pcm3168a codec connected to McASP10 serializers in parallel setup.
> 
> The Infotainment board plugs into the Common Processor Board, the support
> of the extension board is extending the CPB audio support by adding
> the two codecs on the expansion board.
> 
> The audio support on the Infotainment Expansion Board consists of McASP0
> connected to two pcm3168a codecs with dedicated set of serializers to each.
> The SCKI for pcm3168a is sourced from j721e AUDIO_REFCLK0 pin.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
> ---
>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  93 +++++++++++
>  .../sound/ti,j721e-cpb-ivi-audio.yaml         | 145 ++++++++++++++++++
>  2 files changed, 238 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
>  create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/sound/ti,j721e-cpb-ivi-audio.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml: duplicate '$id' value 'http://devicetree.org/schemas/sound/ti,j721e-cpb-audio.yaml#'
Error: Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dts:21.23-24 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:311: recipe for target 'Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dt.yaml' failed
make[1]: *** [Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1262: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1258054

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.