[PATCH v2] ASoC: cros_ec_codec: Log results when EC commands fail

[Yu-Hsuan Hsu]

Enric Balletbo i Serra <enric.balletbo at collabora.com> 於 2020年7月3日 週五 下午4:38寫道：
>
> Hi Yu-Hsuan,
>
> Thank you for your patch
>
> On 3/7/20 9:19, Yu-Hsuan Hsu wrote:
> > Log results of failed EC commands to identify a problem more easily.
> >
> > Replace cros_ec_cmd_xfer_status with cros_ec_cmd_xfer because the result
> > has already been checked in this function. The wrapper is not needed.
> >
>
> Nack, we did an effort to remove all public users of cros_ec_cmd_xfer() in
> favour of cros_ec_cmd_xfer_status() and you are reintroducing again. You can do
> the same but using cros_ec_cmd_xfer_status(). In fact, your patch will not build
> on top of the upcoming changes.
Thanks! But I have a question about implementing it. Does it look like
the one below?
ret = cros_ec_cmd_xfer_status(ec_dev, msg);
if (ret < 0) {
  if (ret == -EPROTO)
    dev_err(..., msg->result)
  goto error;
}
I'm not sure whether it makes sense to check ret == -EPROTO here.

>
> > Signed-off-by: Yu-Hsuan Hsu <yuhsuan at chromium.org>
> > ---
> >  sound/soc/codecs/cros_ec_codec.c | 9 ++++++++-
> >  1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> > index 8d45c628e988e..a4ab62f59efa6 100644
> > --- a/sound/soc/codecs/cros_ec_codec.c
> > +++ b/sound/soc/codecs/cros_ec_codec.c
> > @@ -90,10 +90,17 @@ static int send_ec_host_command(struct cros_ec_device *ec_dev, uint32_t cmd,
> >       if (outsize)
> >               memcpy(msg->data, out, outsize);
> >
> > -     ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> > +     ret = cros_ec_cmd_xfer(ec_dev, msg);
> >       if (ret < 0)
> >               goto error;
> >
> > +     if (msg->result != EC_RES_SUCCESS) {
> > +             dev_err(ec_dev->dev, "Command %d failed: %d\n", cmd,
> > +                     msg->result);
> > +             ret = -EPROTO;
> > +             goto error;
> > +     }
> > +
> >       if (insize)
> >               memcpy(in, msg->data, insize);
> >
> >