[PATCH v2] ASoC: cros_ec_codec: Log results when EC commands fail
Enric Balletbo i Serra
enric.balletbo at collabora.com
Fri Jul 3 11:19:14 CEST 2020
Hi Yu-Hsuan,
On 3/7/20 10:48, Yu-Hsuan Hsu wrote:
> Enric Balletbo i Serra <enric.balletbo at collabora.com> 於 2020年7月3日 週五 下午4:38寫道:
>>
>> Hi Yu-Hsuan,
>>
>> Thank you for your patch
>>
>> On 3/7/20 9:19, Yu-Hsuan Hsu wrote:
>>> Log results of failed EC commands to identify a problem more easily.
>>>
>>> Replace cros_ec_cmd_xfer_status with cros_ec_cmd_xfer because the result
>>> has already been checked in this function. The wrapper is not needed.
>>>
>>
>> Nack, we did an effort to remove all public users of cros_ec_cmd_xfer() in
>> favour of cros_ec_cmd_xfer_status() and you are reintroducing again. You can do
>> the same but using cros_ec_cmd_xfer_status(). In fact, your patch will not build
>> on top of the upcoming changes.
> Thanks! But I have a question about implementing it. Does it look like
> the one below?
> ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> if (ret < 0) {
In this case will already print an error.
What are you trying to achieve?
If the only reason is of this patch is print a message you should either, or
enable dynamic printk and enable dev_dbg or event better use the kernel trace
functionality. There is no need to be more verbose.
Example:
$ echo 1 > /sys/kernel/debug/tracing/events/cros_ec/enable
$ cat /sys/kernel/debug/tracing/trace
369.416372: cros_ec_request_start: version: 0, command: EC_CMD_USB_PD_POWER_INFO
369.420528: cros_ec_request_done: version: 0, command:
EC_CMD_USB_PD_POWER_INFO, ec result: EC_RES_SUCCESS, retval: 16
Cheers,
Enric
> if (ret == -EPROTO)
> dev_err(..., msg->result)
> goto error;
> }
> I'm not sure whether it makes sense to check ret == -EPROTO here.
>
>>
>>> Signed-off-by: Yu-Hsuan Hsu <yuhsuan at chromium.org>
>>> ---
>>> sound/soc/codecs/cros_ec_codec.c | 9 ++++++++-
>>> 1 file changed, 8 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
>>> index 8d45c628e988e..a4ab62f59efa6 100644
>>> --- a/sound/soc/codecs/cros_ec_codec.c
>>> +++ b/sound/soc/codecs/cros_ec_codec.c
>>> @@ -90,10 +90,17 @@ static int send_ec_host_command(struct cros_ec_device *ec_dev, uint32_t cmd,
>>> if (outsize)
>>> memcpy(msg->data, out, outsize);
>>>
>>> - ret = cros_ec_cmd_xfer_status(ec_dev, msg);
>>> + ret = cros_ec_cmd_xfer(ec_dev, msg);
>>> if (ret < 0)
>>> goto error;
>>>
>>> + if (msg->result != EC_RES_SUCCESS) {
>>> + dev_err(ec_dev->dev, "Command %d failed: %d\n", cmd,
>>> + msg->result);
>>> + ret = -EPROTO;
>>> + goto error;
>>> + }
>>> +
>>> if (insize)
>>> memcpy(in, msg->data, insize);
>>>
>>>
More information about the Alsa-devel
mailing list