[PATCH v4 02/13] ASoC: Intel: catpt: Define DSP operations

[Andy Shevchenko]

On Thu, Aug 20, 2020 at 09:30:13AM +0200, Cezary Rojewski wrote:
> On 2020-08-17 1:12 PM, Cezary Rojewski wrote:
> > On 2020-08-13 8:51 PM, Andy Shevchenko wrote:
> > > On Wed, Aug 12, 2020 at 10:57:42PM +0200, Cezary Rojewski wrote:

...

> > > > +#define CATPT_DMA_MAXBURST    0x3
> > > 
> > > We have DMA engine definitions for that, please avoid magic numbers.
> > 
> > As with most of the dma stuff, based on existing:
> > /sound/soc/intel/common/sst-firmware.c SST_DSP_DMA_MAX_BURST
> > 
> > Ack.
> 
> Actually, wasn't able to find anything _MAXBURST related in dmaengine.h.
> _BUSWIDTH_ have their constants defined there, true, but I'm already making
> use of these and this is dst/src_maxburst we're talking about. From what
> I've seen in kernel sources, most usages are direct assignments:
> xxx_maxburst = Y;

Okay, and how 0x3 bytes can be a burst? Does DMA engine support this?

...

> > > > +    /* set D3 */
> > > > +    catpt_updatel_pci(cdev, PMCS, CATPT_PMCS_PS, CATPT_PMCS_PS_D3HOT);
> > > > +    udelay(50);
> > > 
> > > Don't we have PCI core function for this?
> > > 
> > > > +    /* set D0 */
> > > > +    catpt_updatel_pci(cdev, PMCS, CATPT_PMCS_PS, 0);
> > > > +    udelay(100);
> > > 
> > > Ditto.
> > > 
> > > > +    /* set D3 */
> > > > +    catpt_updatel_pci(cdev, PMCS, CATPT_PMCS_PS, CATPT_PMCS_PS_D3HOT);
> > > > +    udelay(50);
> > > 
> > > Ditto.
> > > 
> > > > +    /* set D0 */
> > > > +    catpt_updatel_pci(cdev, PMCS, CATPT_PMCS_PS, 0);
> > > 
> > > Ditto.
> > 
> > Thanks to you now I know the correct answer: yes.
> > Ack for all of these. Good advice Andy, again!
> 
> Similar situation occurred here. What we're dealing with is: instance of
> 'struct platform_device' type, found on bus: acpi with PCI set as a parent
> device.
> 
> Scope found in DSDT:
> 	\_SB_.PCI0.ADSP
> sysfs device path:
> 	/sys/devices/pci0000:00/INT3438:00
> Within the latter _no_ standard utility files will be available e.g.:
> ability to dump PCI config space, bars and such.

I see. Can you dump DSDT somewhere? We are interested in
PSx/PRx/PSE/PSW/PSC/PRE/PRW/ON/OFF (x=0..3) methods.

> I haven't found any functionality to extract "pci_companion" from a
> platform_device. What can be made use of is: PCI_D3hot and PCI_D0 enum
> constants, as pci_set_power_state() does not apply - expects struct pci_dev
> *.
> 
> Perhaps got misled by the function naming? catpt_updatel_xxx helpers: _xxx
> denotes specific ADSP device's mmio space. Almost all cases are covered by
> _pci and _shim.

If we really need to use these commands directly, utilize at least definitions
from PCI core, e.g. PCI_D0, PCI_D3hot, PCI_PM_CTRL.

-- 
With Best Regards,
Andy Shevchenko