[alsa-devel] [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples
Dmitry Osipenko
digetx at gmail.com
Fri Dec 20 16:02:25 CET 2019
20.12.2019 17:56, Ben Dooks пишет:
> On 20/12/2019 14:43, Dmitry Osipenko wrote:
>> 20.12.2019 16:57, Jon Hunter пишет:
>>>
>>> On 20/12/2019 11:38, Ben Dooks wrote:
>>>> On 20/12/2019 11:30, Jon Hunter wrote:
>>>>>
>>>>> On 25/11/2019 17:28, Dmitry Osipenko wrote:
>>>>>> 25.11.2019 20:22, Dmitry Osipenko пишет:
>>>>>>> 25.11.2019 13:37, Ben Dooks пишет:
>>>>>>>> On 23/11/2019 21:09, Dmitry Osipenko wrote:
>>>>>>>>> 18.10.2019 18:48, Ben Dooks пишет:
>>>>>>>>>> From: Edward Cragg <edward.cragg at codethink.co.uk>
>>>>>>>>>>
>>>>>>>>>> The tegra3 audio can support 24 and 32 bit sample sizes so add
>>>>>>>>>> the
>>>>>>>>>> option to the tegra30_i2s_hw_params to configure the S24_LE or
>>>>>>>>>> S32_LE
>>>>>>>>>> formats when requested.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Edward Cragg <edward.cragg at codethink.co.uk>
>>>>>>>>>> [ben.dooks at codethink.co.uk: fixup merge of 24 and 32bit]
>>>>>>>>>> [ben.dooks at codethink.co.uk: add pm calls around ytdm config]
>>>>>>>>>> [ben.dooks at codethink.co.uk: drop debug printing to dev_dbg]
>>>>>>>>>> Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
>>>>>>>>>> ---
>>>>>>>>>> squash 5aeca5a055fd ASoC: tegra: i2s: pm_runtime_get_sync() is
>>>>>>>>>> needed
>>>>>>>>>> in tdm code
>>>>>>>>>>
>>>>>>>>>> ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
>>>>>>>>>> ---
>>>>>>>>>> sound/soc/tegra/tegra30_i2s.c | 25 ++++++++++++++++++++-----
>>>>>>>>>> 1 file changed, 20 insertions(+), 5 deletions(-)
>>>>>>>>>>
>>>>>>>>>> diff --git a/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>>> b/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>>> index 73f0dddeaef3..063f34c882af 100644
>>>>>>>>>> --- a/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>>> +++ b/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>>> @@ -127,7 +127,7 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>> struct device *dev = dai->dev;
>>>>>>>>>> struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>>>>>>>>>> unsigned int mask, val, reg;
>>>>>>>>>> - int ret, sample_size, srate, i2sclock, bitcnt;
>>>>>>>>>> + int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
>>>>>>>>>> struct tegra30_ahub_cif_conf cif_conf;
>>>>>>>>>> if (params_channels(params) != 2)
>>>>>>>>>> @@ -137,8 +137,19 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>> switch (params_format(params)) {
>>>>>>>>>> case SNDRV_PCM_FORMAT_S16_LE:
>>>>>>>>>> val = TEGRA30_I2S_CTRL_BIT_SIZE_16;
>>>>>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>>> sample_size = 16;
>>>>>>>>>> break;
>>>>>>>>>> + case SNDRV_PCM_FORMAT_S24_LE:
>>>>>>>>>> + val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
>>>>>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_24;
>>>>>>>>>> + sample_size = 24;
>>>>>>>>>> + break;
>>>>>>>>>> + case SNDRV_PCM_FORMAT_S32_LE:
>>>>>>>>>> + val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
>>>>>>>>>> + audio_bits = TEGRA30_AUDIOCIF_BITS_32;
>>>>>>>>>> + sample_size = 32;
>>>>>>>>>> + break;
>>>>>>>>>> default:
>>>>>>>>>> return -EINVAL;
>>>>>>>>>> }
>>>>>>>>>> @@ -170,8 +181,8 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>> cif_conf.threshold = 0;
>>>>>>>>>> cif_conf.audio_channels = 2;
>>>>>>>>>> cif_conf.client_channels = 2;
>>>>>>>>>> - cif_conf.audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>>> - cif_conf.client_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>>> + cif_conf.audio_bits = audio_bits;
>>>>>>>>>> + cif_conf.client_bits = audio_bits;
>>>>>>>>>> cif_conf.expand = 0;
>>>>>>>>>> cif_conf.stereo_conv = 0;
>>>>>>>>>> cif_conf.replicate = 0;
>>>>>>>>>> @@ -306,14 +317,18 @@ static const struct snd_soc_dai_driver
>>>>>>>>>> tegra30_i2s_dai_template = {
>>>>>>>>>> .channels_min = 2,
>>>>>>>>>> .channels_max = 2,
>>>>>>>>>> .rates = SNDRV_PCM_RATE_8000_96000,
>>>>>>>>>> - .formats = SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>> + .formats = SNDRV_PCM_FMTBIT_S32_LE |
>>>>>>>>>> + SNDRV_PCM_FMTBIT_S24_LE |
>>>>>>>>>> + SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>> },
>>>>>>>>>> .capture = {
>>>>>>>>>> .stream_name = "Capture",
>>>>>>>>>> .channels_min = 2,
>>>>>>>>>> .channels_max = 2,
>>>>>>>>>> .rates = SNDRV_PCM_RATE_8000_96000,
>>>>>>>>>> - .formats = SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>> + .formats = SNDRV_PCM_FMTBIT_S32_LE |
>>>>>>>>>> + SNDRV_PCM_FMTBIT_S24_LE |
>>>>>>>>>> + SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>> },
>>>>>>>>>> .ops = &tegra30_i2s_dai_ops,
>>>>>>>>>> .symmetric_rates = 1,
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> This patch breaks audio on Tegra30. I don't see errors
>>>>>>>>> anywhere, but
>>>>>>>>> there is no audio and reverting this patch helps. Please fix it.
>>>>>>>>
>>>>>>>> What is the failure mode? I can try and take a look at this some
>>>>>>>> time
>>>>>>>> this week, but I am not sure if I have any boards with an actual
>>>>>>>> useful
>>>>>>>> audio output?
>>>>>>>
>>>>>>> The failure mode is that there no sound. I also noticed that video
>>>>>>> playback stutters a lot if movie file has audio track, seems
>>>>>>> something
>>>>>>> times out during of the audio playback. For now I don't have any
>>>>>>> more info.
>>>>>>>
>>>>>>
>>>>>> Oh, I didn't say how to reproduce it.. for example simply playing
>>>>>> big_buck_bunny_720p_h264.mov in MPV has the audio problem.
>>>>>>
>>>>>> https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_h264.mov
>>>>>>
>>>>>>
>>>>>
>>>>> Given that the audio drivers uses regmap, it could be good to dump the
>>>>> I2S/AHUB registers while the clip if playing with and without this
>>>>> patch
>>>>> to see the differences. I am curious if the audio is now being
>>>>> played as
>>>>> 24 or 32-bit instead of 16-bit now these are available.
>>>>>
>>>>> You could also dump the hw_params to see the format while playing as
>>>>> well ...
>>>>>
>>>>> $ /proc/asound/<scard-name>/pcm0p/sub0/hw_params
>>>>
>>>> I suppose it is also possible that the codec isn't properly doing >16
>>>> bits and the fact we now offer 24 and 32 could be an issue. I've not
>>>> got anything with an audio output on it that would be easy to test.
>>>
>>> I thought I had tested on a Jetson TK1 (Tegra124) but it was sometime
>>> back. However, admittedly I may have only done simple 16-bit testing
>>> with speaker-test.
>>>
>>> We do verify that all soundcards are detected and registered as expected
>>> during daily testing, but at the moment we don't have anything that
>>> verifies actual playback.
>>
>> Please take a look at the attached logs.
>
> I wonder if we are falling into FIFO configuration issues with the
> non-16 bit case.
>
> Can you try adding the following two patches?
It is much better now! There is no horrible noise and no stuttering, but
audio still has a "robotic" effect, like freq isn't correct.
More information about the Alsa-devel
mailing list