[alsa-devel] [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples

Ben Dooks ben.dooks at codethink.co.uk
Fri Dec 20 15:56:47 CET 2019


On 20/12/2019 14:43, Dmitry Osipenko wrote:
> 20.12.2019 16:57, Jon Hunter пишет:
>>
>> On 20/12/2019 11:38, Ben Dooks wrote:
>>> On 20/12/2019 11:30, Jon Hunter wrote:
>>>>
>>>> On 25/11/2019 17:28, Dmitry Osipenko wrote:
>>>>> 25.11.2019 20:22, Dmitry Osipenko пишет:
>>>>>> 25.11.2019 13:37, Ben Dooks пишет:
>>>>>>> On 23/11/2019 21:09, Dmitry Osipenko wrote:
>>>>>>>> 18.10.2019 18:48, Ben Dooks пишет:
>>>>>>>>> From: Edward Cragg <edward.cragg at codethink.co.uk>
>>>>>>>>>
>>>>>>>>> The tegra3 audio can support 24 and 32 bit sample sizes so add the
>>>>>>>>> option to the tegra30_i2s_hw_params to configure the S24_LE or
>>>>>>>>> S32_LE
>>>>>>>>> formats when requested.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Edward Cragg <edward.cragg at codethink.co.uk>
>>>>>>>>> [ben.dooks at codethink.co.uk: fixup merge of 24 and 32bit]
>>>>>>>>> [ben.dooks at codethink.co.uk: add pm calls around ytdm config]
>>>>>>>>> [ben.dooks at codethink.co.uk: drop debug printing to dev_dbg]
>>>>>>>>> Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
>>>>>>>>> ---
>>>>>>>>> squash 5aeca5a055fd ASoC: tegra: i2s: pm_runtime_get_sync() is
>>>>>>>>> needed
>>>>>>>>> in tdm code
>>>>>>>>>
>>>>>>>>> ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
>>>>>>>>> ---
>>>>>>>>>     sound/soc/tegra/tegra30_i2s.c | 25 ++++++++++++++++++++-----
>>>>>>>>>     1 file changed, 20 insertions(+), 5 deletions(-)
>>>>>>>>>
>>>>>>>>> diff --git a/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>> b/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>> index 73f0dddeaef3..063f34c882af 100644
>>>>>>>>> --- a/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>> +++ b/sound/soc/tegra/tegra30_i2s.c
>>>>>>>>> @@ -127,7 +127,7 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>         struct device *dev = dai->dev;
>>>>>>>>>         struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>>>>>>>>>         unsigned int mask, val, reg;
>>>>>>>>> -    int ret, sample_size, srate, i2sclock, bitcnt;
>>>>>>>>> +    int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
>>>>>>>>>         struct tegra30_ahub_cif_conf cif_conf;
>>>>>>>>>           if (params_channels(params) != 2)
>>>>>>>>> @@ -137,8 +137,19 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>         switch (params_format(params)) {
>>>>>>>>>         case SNDRV_PCM_FORMAT_S16_LE:
>>>>>>>>>             val = TEGRA30_I2S_CTRL_BIT_SIZE_16;
>>>>>>>>> +        audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>>             sample_size = 16;
>>>>>>>>>             break;
>>>>>>>>> +    case SNDRV_PCM_FORMAT_S24_LE:
>>>>>>>>> +        val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
>>>>>>>>> +        audio_bits = TEGRA30_AUDIOCIF_BITS_24;
>>>>>>>>> +        sample_size = 24;
>>>>>>>>> +        break;
>>>>>>>>> +    case SNDRV_PCM_FORMAT_S32_LE:
>>>>>>>>> +        val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
>>>>>>>>> +        audio_bits = TEGRA30_AUDIOCIF_BITS_32;
>>>>>>>>> +        sample_size = 32;
>>>>>>>>> +        break;
>>>>>>>>>         default:
>>>>>>>>>             return -EINVAL;
>>>>>>>>>         }
>>>>>>>>> @@ -170,8 +181,8 @@ static int tegra30_i2s_hw_params(struct
>>>>>>>>> snd_pcm_substream *substream,
>>>>>>>>>         cif_conf.threshold = 0;
>>>>>>>>>         cif_conf.audio_channels = 2;
>>>>>>>>>         cif_conf.client_channels = 2;
>>>>>>>>> -    cif_conf.audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>> -    cif_conf.client_bits = TEGRA30_AUDIOCIF_BITS_16;
>>>>>>>>> +    cif_conf.audio_bits = audio_bits;
>>>>>>>>> +    cif_conf.client_bits = audio_bits;
>>>>>>>>>         cif_conf.expand = 0;
>>>>>>>>>         cif_conf.stereo_conv = 0;
>>>>>>>>>         cif_conf.replicate = 0;
>>>>>>>>> @@ -306,14 +317,18 @@ static const struct snd_soc_dai_driver
>>>>>>>>> tegra30_i2s_dai_template = {
>>>>>>>>>             .channels_min = 2,
>>>>>>>>>             .channels_max = 2,
>>>>>>>>>             .rates = SNDRV_PCM_RATE_8000_96000,
>>>>>>>>> -        .formats = SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>> +        .formats = SNDRV_PCM_FMTBIT_S32_LE |
>>>>>>>>> +               SNDRV_PCM_FMTBIT_S24_LE |
>>>>>>>>> +               SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>         },
>>>>>>>>>         .capture = {
>>>>>>>>>             .stream_name = "Capture",
>>>>>>>>>             .channels_min = 2,
>>>>>>>>>             .channels_max = 2,
>>>>>>>>>             .rates = SNDRV_PCM_RATE_8000_96000,
>>>>>>>>> -        .formats = SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>> +        .formats = SNDRV_PCM_FMTBIT_S32_LE |
>>>>>>>>> +               SNDRV_PCM_FMTBIT_S24_LE |
>>>>>>>>> +               SNDRV_PCM_FMTBIT_S16_LE,
>>>>>>>>>         },
>>>>>>>>>         .ops = &tegra30_i2s_dai_ops,
>>>>>>>>>         .symmetric_rates = 1,
>>>>>>>>>
>>>>>>>>
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> This patch breaks audio on Tegra30. I don't see errors anywhere, but
>>>>>>>> there is no audio and reverting this patch helps. Please fix it.
>>>>>>>
>>>>>>> What is the failure mode? I can try and take a look at this some time
>>>>>>> this week, but I am not sure if I have any boards with an actual
>>>>>>> useful
>>>>>>> audio output?
>>>>>>
>>>>>> The failure mode is that there no sound. I also noticed that video
>>>>>> playback stutters a lot if movie file has audio track, seems something
>>>>>> times out during of the audio playback. For now I don't have any
>>>>>> more info.
>>>>>>
>>>>>
>>>>> Oh, I didn't say how to reproduce it.. for example simply playing
>>>>> big_buck_bunny_720p_h264.mov in MPV has the audio problem.
>>>>>
>>>>> https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_h264.mov
>>>>>
>>>>
>>>> Given that the audio drivers uses regmap, it could be good to dump the
>>>> I2S/AHUB registers while the clip if playing with and without this patch
>>>> to see the differences. I am curious if the audio is now being played as
>>>> 24 or 32-bit instead of 16-bit now these are available.
>>>>
>>>> You could also dump the hw_params to see the format while playing as
>>>> well ...
>>>>
>>>> $ /proc/asound/<scard-name>/pcm0p/sub0/hw_params
>>>
>>> I suppose it is also possible that the codec isn't properly doing >16
>>> bits and the fact we now offer 24 and 32 could be an issue. I've not
>>> got anything with an audio output on it that would be easy to test.
>>
>> I thought I had tested on a Jetson TK1 (Tegra124) but it was sometime
>> back. However, admittedly I may have only done simple 16-bit testing
>> with speaker-test.
>>
>> We do verify that all soundcards are detected and registered as expected
>> during daily testing, but at the moment we don't have anything that
>> verifies actual playback.
> 
> Please take a look at the attached logs.

I wonder if we are falling into FIFO configuration issues with the
non-16 bit case.

Can you try adding the following two patches?


-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

https://www.codethink.co.uk/privacy.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0002-ASoC-tegra-take-packing-settings-from-the-audio-cif_.patch
Type: text/x-patch
Size: 2846 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20191220/3a8ab52f/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-ASoC-tegra-config-fifos-on-hw_param-changes.patch
Type: text/x-patch
Size: 7848 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20191220/3a8ab52f/attachment-0001.bin>


More information about the Alsa-devel mailing list