[alsa-devel] [PATCH v4 1/7] dt-bindings: clk: at91: add an I2S mux clock

[Stephen Boyd]

Quoting Rob Herring (2018-05-31 07:20:57)
> On Thu, May 31, 2018 at 5:25 AM, Codrin Ciubotariu
> <codrin.ciubotariu at microchip.com> wrote:
> > On 31.05.2018 03:58, Rob Herring wrote:
> >>
> >> On Fri, May 25, 2018 at 03:34:22PM +0300, Codrin Ciubotariu wrote:
> >>>
> >>> The I2S mux clock can be used to select the I2S input clock. The
> >>> available parents are the peripheral and the generated clocks.
> >>>
> >>> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at microchip.com>
> >>> ---
> >>>   .../devicetree/bindings/clock/at91-clock.txt       | 34
> >>> ++++++++++++++++++++++
> >>>   1 file changed, 34 insertions(+)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt
> >>> b/Documentation/devicetree/bindings/clock/at91-clock.txt
> >>> index 51c259a..1c46b3c 100644
> >>> --- a/Documentation/devicetree/bindings/clock/at91-clock.txt
> >>> +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
> >>> @@ -90,6 +90,8 @@ Required properties:
> >>>         "atmel,sama5d2-clk-audio-pll-pmc"
> >>>                 at91 audio pll output on AUDIOPLLCLK that feeds the PMC
> >>>                 and can be used by peripheral clock or generic clock
> >>> +       "atmel,sama5d2-clk-i2s-mux":
> >>> +               at91 I2S clock source selection
> >>
> >>
> >> Is this boolean or takes some values. If latter, what are valid values?
> >
> >
> > This is the compatible string of the clock driver.
> 
> Ah, now I remember. AT91 uses fine grained clock nodes in DT. Is there
> still a plan to fix this?

I'm also interested in a plan.

> >>
> >>> +               compatible = "atmel,sama5d2-clk-i2s-mux";
> >>> +               #address-cells = <1>;
> >>> +               #size-cells = <0>;
> >>
> >>
> >> How do you address this block? My guess is you don't because it is just
> >> part of some other block and you are just creating this node to
> >> instantiate a driver. Just make the node for the actual h/w block a
> >> clock provider and define the clock ids (0 and 1).
> >
> >
> > This block is not addressed, but its children are. The register we access in
> > this driver is not part of other block. It's a SFR register, accessed
> > through syscon and it has nothing to do with the I2S IP (see SAMA5D2 DS,
> > page 1256, fig. 44-1: I2SC Block Diagram) that is the consumer of this
> > clock. Adding a clock-id property in the I2S node would be just like v3 of
> > this series, with the difference that we use clock-id instead of alias id to
> > set the clock parent, which is not how you suggested back then.
> 
> I wasn't suggesting a clock-id property, but a clock specifier (i.e.
> make #clock-cells 1).
> 
> But AT91 clocks are all a mess, so I don't know what to tell you.
> 

If #clock-cells of 1 works then we should go with that. It's still weird
that we need random nodes to add more clks, but I guess that's how it's
going to be for each at91 clk driver until it changes to be one big
provider node.