[alsa-devel] Applied "ASoC: wm8903: replace codec to component" to the asoc tree
Mark Brown
broonie at kernel.org
Mon Feb 12 13:48:15 CET 2018
The patch
ASoC: wm8903: replace codec to component
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 58bd2934923b7339e7320b1cbe87f13287c57c31 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Date: Mon, 29 Jan 2018 03:05:11 +0000
Subject: [PATCH] ASoC: wm8903: replace codec to component
Now we can replace Codec to Component. Let's do it.
Note:
xxx_codec_xxx() -> xxx_component_xxx()
.idle_bias_off = 0 -> .idle_bias_on = 1
.ignore_pmdown_time = 0 -> .use_pmdown_time = 1
- -> .endianness = 1
- -> .non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
sound/soc/codecs/wm8903.c | 211 ++++++++++++++++++++---------------------
sound/soc/codecs/wm8903.h | 2 +-
sound/soc/tegra/tegra_wm8903.c | 8 +-
3 files changed, 110 insertions(+), 111 deletions(-)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index cba90f21161f..7b8b6ef2f632 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -270,15 +270,15 @@ static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
static int wm8903_dcs_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
wm8903->dcs_pending |= 1 << w->shift;
break;
case SND_SOC_DAPM_PRE_PMD:
- snd_soc_update_bits(codec, WM8903_DC_SERVO_0,
+ snd_soc_component_update_bits(component, WM8903_DC_SERVO_0,
1 << w->shift, 0);
break;
}
@@ -289,17 +289,16 @@ static int wm8903_dcs_event(struct snd_soc_dapm_widget *w,
#define WM8903_DCS_MODE_WRITE_STOP 0
#define WM8903_DCS_MODE_START_STOP 2
-static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
+static void wm8903_seq_notifier(struct snd_soc_component *component,
enum snd_soc_dapm_type event, int subseq)
{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(dapm);
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int dcs_mode = WM8903_DCS_MODE_WRITE_STOP;
int i, val;
/* Complete any pending DC servo starts */
if (wm8903->dcs_pending) {
- dev_dbg(codec->dev, "Starting DC servo for %x\n",
+ dev_dbg(component->dev, "Starting DC servo for %x\n",
wm8903->dcs_pending);
/* If we've no cached values then we need to do startup */
@@ -308,14 +307,14 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
continue;
if (wm8903->dcs_cache[i]) {
- dev_dbg(codec->dev,
+ dev_dbg(component->dev,
"Restore DC servo %d value %x\n",
3 - i, wm8903->dcs_cache[i]);
- snd_soc_write(codec, WM8903_DC_SERVO_4 + i,
+ snd_soc_component_write(component, WM8903_DC_SERVO_4 + i,
wm8903->dcs_cache[i] & 0xff);
} else {
- dev_dbg(codec->dev,
+ dev_dbg(component->dev,
"Calibrate DC servo %d\n", 3 - i);
dcs_mode = WM8903_DCS_MODE_START_STOP;
}
@@ -325,10 +324,10 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
if (wm8903->class_w_users)
dcs_mode = WM8903_DCS_MODE_START_STOP;
- snd_soc_update_bits(codec, WM8903_DC_SERVO_2,
+ snd_soc_component_update_bits(component, WM8903_DC_SERVO_2,
WM8903_DCS_MODE_MASK, dcs_mode);
- snd_soc_update_bits(codec, WM8903_DC_SERVO_0,
+ snd_soc_component_update_bits(component, WM8903_DC_SERVO_0,
WM8903_DCS_ENA_MASK, wm8903->dcs_pending);
switch (dcs_mode) {
@@ -346,9 +345,9 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
if (!(wm8903->dcs_pending & (1 << i)))
continue;
- val = snd_soc_read(codec,
+ val = snd_soc_component_read32(component,
WM8903_DC_SERVO_READBACK_1 + i);
- dev_dbg(codec->dev, "DC servo %d: %x\n",
+ dev_dbg(component->dev, "DC servo %d: %x\n",
3 - i, val);
wm8903->dcs_cache[i] = val;
}
@@ -374,18 +373,18 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_dapm_kcontrol_codec(kcontrol);
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol);
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
u16 reg;
int ret;
- reg = snd_soc_read(codec, WM8903_CLASS_W_0);
+ reg = snd_soc_component_read32(component, WM8903_CLASS_W_0);
/* Turn it off if we're about to enable bypass */
if (ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 0) {
- dev_dbg(codec->dev, "Disabling Class W\n");
- snd_soc_write(codec, WM8903_CLASS_W_0, reg &
+ dev_dbg(component->dev, "Disabling Class W\n");
+ snd_soc_component_write(component, WM8903_CLASS_W_0, reg &
~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
}
wm8903->class_w_users++;
@@ -397,14 +396,14 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
/* If we've just disabled the last bypass path turn Class W on */
if (!ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 1) {
- dev_dbg(codec->dev, "Enabling Class W\n");
- snd_soc_write(codec, WM8903_CLASS_W_0, reg |
+ dev_dbg(component->dev, "Enabling Class W\n");
+ snd_soc_component_write(component, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
wm8903->class_w_users--;
}
- dev_dbg(codec->dev, "Bypass use count now %d\n",
+ dev_dbg(component->dev, "Bypass use count now %d\n",
wm8903->class_w_users);
return ret;
@@ -417,9 +416,9 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
static int wm8903_deemph[] = { 0, 32000, 44100, 48000 };
-static int wm8903_set_deemph(struct snd_soc_codec *codec)
+static int wm8903_set_deemph(struct snd_soc_component *component)
{
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int val, i, best;
/* If we're using deemphasis select the nearest available sample
@@ -439,18 +438,18 @@ static int wm8903_set_deemph(struct snd_soc_codec *codec)
val = 0;
}
- dev_dbg(codec->dev, "Set deemphasis %d (%dHz)\n",
+ dev_dbg(component->dev, "Set deemphasis %d (%dHz)\n",
best, wm8903_deemph[best]);
- return snd_soc_update_bits(codec, WM8903_DAC_DIGITAL_1,
+ return snd_soc_component_update_bits(component, WM8903_DAC_DIGITAL_1,
WM8903_DEEMPH_MASK, val);
}
static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = wm8903->deemph;
@@ -460,8 +459,8 @@ static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
unsigned int deemph = ucontrol->value.integer.value[0];
int ret = 0;
@@ -472,7 +471,7 @@ static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
if (wm8903->deemph != deemph) {
wm8903->deemph = deemph;
- wm8903_set_deemph(codec);
+ wm8903_set_deemph(component);
ret = 1;
}
@@ -1101,7 +1100,7 @@ static const struct snd_soc_dapm_route wm8903_intercon[] = {
{ "Right Line Output PGA", NULL, "Charge Pump" },
};
-static int wm8903_set_bias_level(struct snd_soc_codec *codec,
+static int wm8903_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
switch (level) {
@@ -1109,14 +1108,14 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_PREPARE:
- snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_50K);
break;
case SND_SOC_BIAS_STANDBY:
- if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
- snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
+ if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
+ snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_POBCTRL | WM8903_ISEL_MASK |
WM8903_STARTUP_BIAS_ENA |
WM8903_BIAS_ENA,
@@ -1124,22 +1123,22 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
(2 << WM8903_ISEL_SHIFT) |
WM8903_STARTUP_BIAS_ENA);
- snd_soc_update_bits(codec,
+ snd_soc_component_update_bits(component,
WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
WM8903_SPK_DISCHARGE,
WM8903_SPK_DISCHARGE);
msleep(33);
- snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5,
+ snd_soc_component_update_bits(component, WM8903_POWER_MANAGEMENT_5,
WM8903_SPKL_ENA | WM8903_SPKR_ENA,
WM8903_SPKL_ENA | WM8903_SPKR_ENA);
- snd_soc_update_bits(codec,
+ snd_soc_component_update_bits(component,
WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
WM8903_SPK_DISCHARGE, 0);
- snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_TIE_ENA |
WM8903_BUFIO_ENA |
WM8903_VMID_IO_ENA |
@@ -1155,57 +1154,57 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
msleep(129);
- snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5,
+ snd_soc_component_update_bits(component, WM8903_POWER_MANAGEMENT_5,
WM8903_SPKL_ENA | WM8903_SPKR_ENA,
0);
- snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_SOFT_MASK, 0);
- snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_50K);
- snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_BIAS_ENA | WM8903_POBCTRL,
WM8903_BIAS_ENA);
/* By default no bypass paths are enabled so
* enable Class W support.
*/
- dev_dbg(codec->dev, "Enabling Class W\n");
- snd_soc_update_bits(codec, WM8903_CLASS_W_0,
+ dev_dbg(component->dev, "Enabling Class W\n");
+ snd_soc_component_update_bits(component, WM8903_CLASS_W_0,
WM8903_CP_DYN_FREQ |
WM8903_CP_DYN_V,
WM8903_CP_DYN_FREQ |
WM8903_CP_DYN_V);
}
- snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_250K);
break;
case SND_SOC_BIAS_OFF:
- snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_BIAS_ENA, 0);
- snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_SOFT_MASK,
2 << WM8903_VMID_SOFT_SHIFT);
- snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_BUF_ENA, 0);
msleep(290);
- snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA |
WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK |
WM8903_VMID_SOFT_MASK |
WM8903_VMID_BUF_ENA, 0);
- snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_STARTUP_BIAS_ENA, 0);
break;
}
@@ -1216,8 +1215,8 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
- struct snd_soc_codec *codec = codec_dai->codec;
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = codec_dai->component;
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
wm8903->sysclk = freq;
@@ -1227,8 +1226,8 @@ static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
- struct snd_soc_codec *codec = codec_dai->codec;
- u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
+ struct snd_soc_component *component = codec_dai->component;
+ u16 aif1 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_1);
aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
@@ -1306,24 +1305,24 @@ static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
return -EINVAL;
}
- snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+ snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_1, aif1);
return 0;
}
static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
- struct snd_soc_codec *codec = codec_dai->codec;
+ struct snd_soc_component *component = codec_dai->component;
u16 reg;
- reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
+ reg = snd_soc_component_read32(component, WM8903_DAC_DIGITAL_1);
if (mute)
reg |= WM8903_DAC_MUTE;
else
reg &= ~WM8903_DAC_MUTE;
- snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg);
+ snd_soc_component_write(component, WM8903_DAC_DIGITAL_1, reg);
return 0;
}
@@ -1443,8 +1442,8 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- struct snd_soc_codec *codec = dai->codec;
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = dai->component;
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int fs = params_rate(params);
int bclk;
int bclk_div;
@@ -1455,12 +1454,12 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
int cur_val;
int clk_sys;
- u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
- u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2);
- u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3);
- u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0);
- u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1);
- u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
+ u16 aif1 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_1);
+ u16 aif2 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_2);
+ u16 aif3 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_3);
+ u16 clock0 = snd_soc_component_read32(component, WM8903_CLOCK_RATES_0);
+ u16 clock1 = snd_soc_component_read32(component, WM8903_CLOCK_RATES_1);
+ u16 dac_digital1 = snd_soc_component_read32(component, WM8903_DAC_DIGITAL_1);
/* Enable sloping stopband filter for low sample rates */
if (fs <= 24000)
@@ -1479,7 +1478,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
}
}
- dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
+ dev_dbg(component->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
clock1 &= ~WM8903_SAMPLE_RATE_MASK;
clock1 |= sample_rates[dsp_config].value;
@@ -1505,7 +1504,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
- dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n",
+ dev_dbg(component->dev, "MCLK = %dHz, target sample rate = %dHz\n",
wm8903->sysclk, fs);
/* We may not have an MCLK which allows us to generate exactly
@@ -1540,12 +1539,12 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
- dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
+ dev_dbg(component->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
clk_sys_ratios[clk_config].rate,
clk_sys_ratios[clk_config].mode,
clk_sys_ratios[clk_config].div);
- dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
+ dev_dbg(component->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
/* We may not get quite the right frequency if using
* approximate clocks so look for the closest match that is
@@ -1567,7 +1566,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
aif2 &= ~WM8903_BCLK_DIV_MASK;
aif3 &= ~WM8903_LRCLK_RATE_MASK;
- dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
+ dev_dbg(component->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
bclk_divs[bclk_div].ratio / 10, bclk,
(clk_sys * 10) / bclk_divs[bclk_div].ratio);
@@ -1575,14 +1574,14 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
aif3 |= bclk / fs;
wm8903->fs = params_rate(params);
- wm8903_set_deemph(codec);
+ wm8903_set_deemph(component);
- snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0);
- snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1);
- snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
- snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
- snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
- snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1);
+ snd_soc_component_write(component, WM8903_CLOCK_RATES_0, clock0);
+ snd_soc_component_write(component, WM8903_CLOCK_RATES_1, clock1);
+ snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_1, aif1);
+ snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_2, aif2);
+ snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_3, aif3);
+ snd_soc_component_write(component, WM8903_DAC_DIGITAL_1, dac_digital1);
return 0;
}
@@ -1590,7 +1589,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
/**
* wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
*
- * @codec: WM8903 codec
+ * @component: WM8903 component
* @jack: jack to report detection events on
* @det: value to report for presence detection
* @shrt: value to report for short detection
@@ -1604,13 +1603,13 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
* micdet_cfg in the platform data. Using this function will force on
* the microphone bias for the device.
*/
-int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
+int wm8903_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *jack,
int det, int shrt)
{
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT;
- dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n",
+ dev_dbg(component->dev, "Enabling microphone detection: %x %x\n",
det, shrt);
/* Store the configuration */
@@ -1624,19 +1623,19 @@ int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
if (shrt)
irq_mask &= ~WM8903_MICSHRT_EINT;
- snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
+ snd_soc_component_update_bits(component, WM8903_INTERRUPT_STATUS_1_MASK,
WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
irq_mask);
if (det || shrt) {
/* Enable mic detection, this may not have been set through
* platform data (eg, if the defaults are OK). */
- snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
+ snd_soc_component_update_bits(component, WM8903_WRITE_SEQUENCER_0,
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
- snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_MIC_BIAS_CONTROL_0,
WM8903_MICDET_ENA, WM8903_MICDET_ENA);
} else {
- snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
+ snd_soc_component_update_bits(component, WM8903_MIC_BIAS_CONTROL_0,
WM8903_MICDET_ENA, 0);
}
@@ -1766,9 +1765,9 @@ static struct snd_soc_dai_driver wm8903_dai = {
.symmetric_rates = 1,
};
-static int wm8903_resume(struct snd_soc_codec *codec)
+static int wm8903_resume(struct snd_soc_component *component)
{
- struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
regcache_sync(wm8903->regmap);
@@ -1884,20 +1883,21 @@ static void wm8903_free_gpio(struct wm8903_priv *wm8903)
}
#endif
-static const struct snd_soc_codec_driver soc_codec_dev_wm8903 = {
- .resume = wm8903_resume,
- .set_bias_level = wm8903_set_bias_level,
- .seq_notifier = wm8903_seq_notifier,
- .suspend_bias_off = true,
-
- .component_driver = {
- .controls = wm8903_snd_controls,
- .num_controls = ARRAY_SIZE(wm8903_snd_controls),
- .dapm_widgets = wm8903_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
- .dapm_routes = wm8903_intercon,
- .num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
- },
+static const struct snd_soc_component_driver soc_component_dev_wm8903 = {
+ .resume = wm8903_resume,
+ .set_bias_level = wm8903_set_bias_level,
+ .seq_notifier = wm8903_seq_notifier,
+ .controls = wm8903_snd_controls,
+ .num_controls = ARRAY_SIZE(wm8903_snd_controls),
+ .dapm_widgets = wm8903_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
+ .dapm_routes = wm8903_intercon,
+ .num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
+ .suspend_bias_off = 1,
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
};
static const struct regmap_config wm8903_regmap = {
@@ -2176,8 +2176,8 @@ static int wm8903_i2c_probe(struct i2c_client *i2c,
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE,
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE);
- ret = snd_soc_register_codec(&i2c->dev,
- &soc_codec_dev_wm8903, &wm8903_dai, 1);
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_component_dev_wm8903, &wm8903_dai, 1);
if (ret != 0)
goto err;
@@ -2197,7 +2197,6 @@ static int wm8903_i2c_remove(struct i2c_client *client)
if (client->irq)
free_irq(client->irq, wm8903);
wm8903_free_gpio(wm8903);
- snd_soc_unregister_codec(&client->dev);
return 0;
}
diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h
index 0bb4a647755d..1301aa9dce6f 100644
--- a/sound/soc/codecs/wm8903.h
+++ b/sound/soc/codecs/wm8903.h
@@ -15,7 +15,7 @@
#include <linux/i2c.h>
-extern int wm8903_mic_detect(struct snd_soc_codec *codec,
+extern int wm8903_mic_detect(struct snd_soc_component *component,
struct snd_soc_jack *jack,
int det, int shrt);
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c
index 18bdae59a4df..69bc9461974b 100644
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -170,7 +170,7 @@ static const struct snd_kcontrol_new tegra_wm8903_controls[] = {
static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_codec *codec = codec_dai->codec;
+ struct snd_soc_component *component = codec_dai->component;
struct snd_soc_card *card = rtd->card;
struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
@@ -189,7 +189,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
&tegra_wm8903_mic_jack,
tegra_wm8903_mic_jack_pins,
ARRAY_SIZE(tegra_wm8903_mic_jack_pins));
- wm8903_mic_detect(codec, &tegra_wm8903_mic_jack, SND_JACK_MICROPHONE,
+ wm8903_mic_detect(component, &tegra_wm8903_mic_jack, SND_JACK_MICROPHONE,
0);
snd_soc_dapm_force_enable_pin(&card->dapm, "MICBIAS");
@@ -202,9 +202,9 @@ static int tegra_wm8903_remove(struct snd_soc_card *card)
struct snd_soc_pcm_runtime *rtd =
snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_codec *codec = codec_dai->codec;
+ struct snd_soc_component *component = codec_dai->component;
- wm8903_mic_detect(codec, NULL, 0, 0);
+ wm8903_mic_detect(component, NULL, 0, 0);
return 0;
}
--
2.16.1
More information about the Alsa-devel
mailing list