[alsa-devel] Applied "ASoC: wm8955: replace codec to component" to the asoc tree
Mark Brown
broonie at kernel.org
Mon Feb 12 13:48:09 CET 2018
The patch
ASoC: wm8955: replace codec to component
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 69b626e68207cf78015ec13f0077af174d710f97 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Date: Mon, 29 Jan 2018 03:05:28 +0000
Subject: [PATCH] ASoC: wm8955: replace codec to component
Now we can replace Codec to Component. Let's do it.
Note:
xxx_codec_xxx() -> xxx_component_xxx()
.idle_bias_off = 0 -> .idle_bias_on = 1
.ignore_pmdown_time = 0 -> .use_pmdown_time = 1
- -> .endianness = 1
- -> .non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
sound/soc/codecs/wm8955.c | 189 ++++++++++++++++++++++------------------------
1 file changed, 91 insertions(+), 98 deletions(-)
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index 1edc7b1df31d..ba44e3d6c1e0 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -128,9 +128,9 @@ static bool wm8955_volatile(struct device *dev, unsigned int reg)
}
}
-static int wm8955_reset(struct snd_soc_codec *codec)
+static int wm8955_reset(struct snd_soc_component *component)
{
- return snd_soc_write(codec, WM8955_RESET, 0);
+ return snd_soc_component_write(component, WM8955_RESET, 0);
}
struct pll_factors {
@@ -242,9 +242,9 @@ static struct {
{ 11289600, 88200, 0, 31, },
};
-static int wm8955_configure_clocking(struct snd_soc_codec *codec)
+static int wm8955_configure_clocking(struct snd_soc_component *component)
{
- struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
int i, ret, val;
int clocking = 0;
int srate = 0;
@@ -267,7 +267,7 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
/* We should never get here with an unsupported sample rate */
if (sr == -1) {
- dev_err(codec->dev, "Sample rate %dHz unsupported\n",
+ dev_err(component->dev, "Sample rate %dHz unsupported\n",
wm8955->fs);
WARN_ON(sr == -1);
return -EINVAL;
@@ -282,30 +282,30 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
/* Use the last divider configuration we saw for the
* sample rate. */
- ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate,
+ ret = wm8995_pll_factors(component->dev, wm8955->mclk_rate,
clock_cfgs[sr].mclk, &pll);
if (ret != 0) {
- dev_err(codec->dev,
+ dev_err(component->dev,
"Unable to generate %dHz from %dHz MCLK\n",
wm8955->fs, wm8955->mclk_rate);
return -EINVAL;
}
- snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1,
+ snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_1,
WM8955_N_MASK | WM8955_K_21_18_MASK,
(pll.n << WM8955_N_SHIFT) |
pll.k >> 18);
- snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2,
+ snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_2,
WM8955_K_17_9_MASK,
(pll.k >> 9) & WM8955_K_17_9_MASK);
- snd_soc_update_bits(codec, WM8955_PLL_CONTROL_3,
+ snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_3,
WM8955_K_8_0_MASK,
pll.k & WM8955_K_8_0_MASK);
if (pll.k)
- snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4,
+ snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_4,
WM8955_KEN, WM8955_KEN);
else
- snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4,
+ snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_4,
WM8955_KEN, 0);
if (pll.outdiv)
@@ -314,17 +314,17 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
val = WM8955_PLL_RB;
/* Now start the PLL running */
- snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_PLL_RB | WM8955_PLLOUTDIV2, val);
- snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_PLLEN, WM8955_PLLEN);
}
srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT);
- snd_soc_update_bits(codec, WM8955_SAMPLE_RATE,
+ snd_soc_component_update_bits(component, WM8955_SAMPLE_RATE,
WM8955_USB | WM8955_SR_MASK, srate);
- snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_MCLKSEL, clocking);
return 0;
@@ -333,22 +333,22 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
static int wm8955_sysclk(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
int ret = 0;
/* Always disable the clocks - if we're doing reconfiguration this
* avoids misclocking.
*/
- snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_DIGENB, 0);
- snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_PLL_RB | WM8955_PLLEN, 0);
switch (event) {
case SND_SOC_DAPM_POST_PMD:
break;
case SND_SOC_DAPM_PRE_PMU:
- ret = wm8955_configure_clocking(codec);
+ ret = wm8955_configure_clocking(component);
break;
default:
ret = -EINVAL;
@@ -360,9 +360,9 @@ static int wm8955_sysclk(struct snd_soc_dapm_widget *w,
static int deemph_settings[] = { 0, 32000, 44100, 48000 };
-static int wm8955_set_deemph(struct snd_soc_codec *codec)
+static int wm8955_set_deemph(struct snd_soc_component *component)
{
- struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
int val, i, best;
/* If we're using deemphasis select the nearest available sample
@@ -381,17 +381,17 @@ static int wm8955_set_deemph(struct snd_soc_codec *codec)
val = 0;
}
- dev_dbg(codec->dev, "Set deemphasis %d\n", val);
+ dev_dbg(component->dev, "Set deemphasis %d\n", val);
- return snd_soc_update_bits(codec, WM8955_DAC_CONTROL,
+ return snd_soc_component_update_bits(component, WM8955_DAC_CONTROL,
WM8955_DEEMPH_MASK, val);
}
static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
- struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = wm8955->deemph;
return 0;
@@ -400,8 +400,8 @@ static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
- struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
unsigned int deemph = ucontrol->value.integer.value[0];
if (deemph > 1)
@@ -409,7 +409,7 @@ static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
wm8955->deemph = deemph;
- return wm8955_set_deemph(codec);
+ return wm8955_set_deemph(component);
}
static const char *bass_mode_text[] = {
@@ -592,8 +592,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- struct snd_soc_codec *codec = dai->codec;
- struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = dai->component;
+ struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
int ret;
int wl;
@@ -613,25 +613,25 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream,
default:
return -EINVAL;
}
- snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE,
+ snd_soc_component_update_bits(component, WM8955_AUDIO_INTERFACE,
WM8955_WL_MASK, wl);
wm8955->fs = params_rate(params);
- wm8955_set_deemph(codec);
+ wm8955_set_deemph(component);
/* If the chip is clocked then disable the clocks and force a
* reconfiguration, otherwise DAPM will power up the
* clocks for us later. */
- ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1);
+ ret = snd_soc_component_read32(component, WM8955_POWER_MANAGEMENT_1);
if (ret < 0)
return ret;
if (ret & WM8955_DIGENB) {
- snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_DIGENB, 0);
- snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_PLL_RB | WM8955_PLLEN, 0);
- wm8955_configure_clocking(codec);
+ wm8955_configure_clocking(component);
}
return 0;
@@ -641,8 +641,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream,
static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
- struct snd_soc_codec *codec = dai->codec;
- struct wm8955_priv *priv = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = dai->component;
+ struct wm8955_priv *priv = snd_soc_component_get_drvdata(component);
int div;
switch (clk_id) {
@@ -655,7 +655,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
div = 0;
}
- snd_soc_update_bits(codec, WM8955_SAMPLE_RATE,
+ snd_soc_component_update_bits(component, WM8955_SAMPLE_RATE,
WM8955_MCLKDIV2, div);
break;
@@ -670,7 +670,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
- struct snd_soc_codec *codec = dai->codec;
+ struct snd_soc_component *component = dai->component;
u16 aif = 0;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -739,7 +739,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
return -EINVAL;
}
- snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE,
+ snd_soc_component_update_bits(component, WM8955_AUDIO_INTERFACE,
WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV |
WM8955_LRP, aif);
@@ -749,7 +749,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
- struct snd_soc_codec *codec = codec_dai->codec;
+ struct snd_soc_component *component = codec_dai->component;
int val;
if (mute)
@@ -757,15 +757,15 @@ static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute)
else
val = 0;
- snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val);
+ snd_soc_component_update_bits(component, WM8955_DAC_CONTROL, WM8955_DACMU, val);
return 0;
}
-static int wm8955_set_bias_level(struct snd_soc_codec *codec,
+static int wm8955_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
- struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
int ret;
switch (level) {
@@ -774,22 +774,22 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
case SND_SOC_BIAS_PREPARE:
/* VMID resistance 2*50k */
- snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_VMIDSEL_MASK,
0x1 << WM8955_VMIDSEL_SHIFT);
/* Default bias current */
- snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1,
+ snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_1,
WM8955_VSEL_MASK,
0x2 << WM8955_VSEL_SHIFT);
break;
case SND_SOC_BIAS_STANDBY:
- if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
+ if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
wm8955->supplies);
if (ret != 0) {
- dev_err(codec->dev,
+ dev_err(component->dev,
"Failed to enable supplies: %d\n",
ret);
return ret;
@@ -798,7 +798,7 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
regcache_sync(wm8955->regmap);
/* Enable VREF and VMID */
- snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_VREF |
WM8955_VMIDSEL_MASK,
WM8955_VREF |
@@ -808,29 +808,29 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
msleep(500);
/* High resistance VROI to maintain outputs */
- snd_soc_update_bits(codec,
+ snd_soc_component_update_bits(component,
WM8955_ADDITIONAL_CONTROL_3,
WM8955_VROI, WM8955_VROI);
}
/* Maintain VMID with 2*250k */
- snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_VMIDSEL_MASK,
0x2 << WM8955_VMIDSEL_SHIFT);
/* Minimum bias current */
- snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1,
+ snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_1,
WM8955_VSEL_MASK, 0);
break;
case SND_SOC_BIAS_OFF:
/* Low resistance VROI to help discharge */
- snd_soc_update_bits(codec,
+ snd_soc_component_update_bits(component,
WM8955_ADDITIONAL_CONTROL_3,
WM8955_VROI, 0);
/* Turn off VMID and VREF */
- snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_VREF |
WM8955_VMIDSEL_MASK, 0);
@@ -865,70 +865,70 @@ static struct snd_soc_dai_driver wm8955_dai = {
.ops = &wm8955_dai_ops,
};
-static int wm8955_probe(struct snd_soc_codec *codec)
+static int wm8955_probe(struct snd_soc_component *component)
{
- struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
- struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
+ struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
+ struct wm8955_pdata *pdata = dev_get_platdata(component->dev);
int ret, i;
for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++)
wm8955->supplies[i].supply = wm8955_supply_names[i];
- ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies),
+ ret = devm_regulator_bulk_get(component->dev, ARRAY_SIZE(wm8955->supplies),
wm8955->supplies);
if (ret != 0) {
- dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ dev_err(component->dev, "Failed to request supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
wm8955->supplies);
if (ret != 0) {
- dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ dev_err(component->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
- ret = wm8955_reset(codec);
+ ret = wm8955_reset(component);
if (ret < 0) {
- dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+ dev_err(component->dev, "Failed to issue reset: %d\n", ret);
goto err_enable;
}
/* Change some default settings - latch VU and enable ZC */
- snd_soc_update_bits(codec, WM8955_LEFT_DAC_VOLUME,
+ snd_soc_component_update_bits(component, WM8955_LEFT_DAC_VOLUME,
WM8955_LDVU, WM8955_LDVU);
- snd_soc_update_bits(codec, WM8955_RIGHT_DAC_VOLUME,
+ snd_soc_component_update_bits(component, WM8955_RIGHT_DAC_VOLUME,
WM8955_RDVU, WM8955_RDVU);
- snd_soc_update_bits(codec, WM8955_LOUT1_VOLUME,
+ snd_soc_component_update_bits(component, WM8955_LOUT1_VOLUME,
WM8955_LO1VU | WM8955_LO1ZC,
WM8955_LO1VU | WM8955_LO1ZC);
- snd_soc_update_bits(codec, WM8955_ROUT1_VOLUME,
+ snd_soc_component_update_bits(component, WM8955_ROUT1_VOLUME,
WM8955_RO1VU | WM8955_RO1ZC,
WM8955_RO1VU | WM8955_RO1ZC);
- snd_soc_update_bits(codec, WM8955_LOUT2_VOLUME,
+ snd_soc_component_update_bits(component, WM8955_LOUT2_VOLUME,
WM8955_LO2VU | WM8955_LO2ZC,
WM8955_LO2VU | WM8955_LO2ZC);
- snd_soc_update_bits(codec, WM8955_ROUT2_VOLUME,
+ snd_soc_component_update_bits(component, WM8955_ROUT2_VOLUME,
WM8955_RO2VU | WM8955_RO2ZC,
WM8955_RO2VU | WM8955_RO2ZC);
- snd_soc_update_bits(codec, WM8955_MONOOUT_VOLUME,
+ snd_soc_component_update_bits(component, WM8955_MONOOUT_VOLUME,
WM8955_MOZC, WM8955_MOZC);
/* Also enable adaptive bass boost by default */
- snd_soc_update_bits(codec, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB);
+ snd_soc_component_update_bits(component, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB);
/* Set platform data values */
if (pdata) {
if (pdata->out2_speaker)
- snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_2,
+ snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_2,
WM8955_ROUT2INV, WM8955_ROUT2INV);
if (pdata->monoin_diff)
- snd_soc_update_bits(codec, WM8955_MONO_OUT_MIX_1,
+ snd_soc_component_update_bits(component, WM8955_MONO_OUT_MIX_1,
WM8955_DMEN, WM8955_DMEN);
}
- snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY);
/* Bias level configuration will have done an extra enable */
regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
@@ -940,19 +940,20 @@ static int wm8955_probe(struct snd_soc_codec *codec)
return ret;
}
-static const struct snd_soc_codec_driver soc_codec_dev_wm8955 = {
- .probe = wm8955_probe,
- .set_bias_level = wm8955_set_bias_level,
- .suspend_bias_off = true,
-
- .component_driver = {
- .controls = wm8955_snd_controls,
- .num_controls = ARRAY_SIZE(wm8955_snd_controls),
- .dapm_widgets = wm8955_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets),
- .dapm_routes = wm8955_dapm_routes,
- .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes),
- },
+static const struct snd_soc_component_driver soc_component_dev_wm8955 = {
+ .probe = wm8955_probe,
+ .set_bias_level = wm8955_set_bias_level,
+ .controls = wm8955_snd_controls,
+ .num_controls = ARRAY_SIZE(wm8955_snd_controls),
+ .dapm_widgets = wm8955_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets),
+ .dapm_routes = wm8955_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes),
+ .suspend_bias_off = 1,
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
};
static const struct regmap_config wm8955_regmap = {
@@ -989,19 +990,12 @@ static int wm8955_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8955);
- ret = snd_soc_register_codec(&i2c->dev,
- &soc_codec_dev_wm8955, &wm8955_dai, 1);
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_component_dev_wm8955, &wm8955_dai, 1);
return ret;
}
-static int wm8955_i2c_remove(struct i2c_client *client)
-{
- snd_soc_unregister_codec(&client->dev);
-
- return 0;
-}
-
static const struct i2c_device_id wm8955_i2c_id[] = {
{ "wm8955", 0 },
{ }
@@ -1013,7 +1007,6 @@ static struct i2c_driver wm8955_i2c_driver = {
.name = "wm8955",
},
.probe = wm8955_i2c_probe,
- .remove = wm8955_i2c_remove,
.id_table = wm8955_i2c_id,
};
--
2.16.1
More information about the Alsa-devel
mailing list