[alsa-devel] [PATCH v2 2/6] ARM: dts: omap2420-n810: Correct the audio codec (tlv320aic33) node
Peter Ujfalusi
peter.ujfalusi at ti.com
Fri Apr 27 10:17:11 CEST 2018
- The n810 uses tlv320aic33 codec.
- GPIO118 is used as reset GPIO for the codec, which was missing.
- The MCLK of the codec is connected to the SYS_CLKOUT2 of omap2420. The
SYS_CLKOUT2 needs to be running at 12MHz.
- Add the pinctrl entries to configure the pins for GPIO118 and SYS_CLKOUT2
- Set DMIC clk mode for GPIO1
- Set DMIC data in for GPIO2
- Select 2V for the DMIC bias
- Add fixed regulators for the codec
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
arch/arm/boot/dts/omap2420-n810.dts | 46 +++++++++++++++++++++++++++--
1 file changed, 44 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts
index 4c412a480c3e..96b9913ecc1f 100644
--- a/arch/arm/boot/dts/omap2420-n810.dts
+++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -6,6 +6,20 @@
/ {
model = "Nokia N810";
compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+
+ vio_ape: vio_ape {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_ape";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ v28_aic: v28_aic {
+ compatible = "regulator-fixed";
+ regulator-name = "v28_aic";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
};
&omap2420_pmx {
@@ -17,14 +31,42 @@
OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */
>;
};
+
+ aic33_pins: aic33_pins {
+ pinctrl-single,pins = <
+ OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */
+ OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */
+ >;
+ };
};
&i2c2 {
- aic3x at 18 {
- compatible = "tlv320aic3x";
+ aic33 at 18 {
+ compatible = "ti,tlv320aic33";
reg = <0x18>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&aic33_pins>;
+
+ gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
+
+ ai3x-gpio-func = <
+ 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
+ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+ >;
+ ai3x-micbias-vg = <1>; /* 2V */
+
+ AVDD-supply = <&v28_aic>;
+ DRVDD-supply = <&v28_aic>;
+ IOVDD-supply = <&vio_ape>;
+ DVDD-supply = <&vio_ape>;
+
+ assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
+ assigned-clock-parents = <&func_96m_ck>;
+ assigned-clock-rates = <0>, <12000000>;
};
};
+
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the Alsa-devel
mailing list