[alsa-devel] [PATCH v2 1/6] ARM: dts: omap2420-n810: Enable McBSP2 for audio

[Peter Ujfalusi]

McBSP2 is used with the tlv320aic33 codec for audio.
Pin mux change is needed to get the needed signals in/out from the SoC.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
Tested-by: Jarkko Nikula <jarkko.nikula at bitmer.com>
---
 arch/arm/boot/dts/omap2420-n810.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts
index 7c485fbfa535..4c412a480c3e 100644
--- a/arch/arm/boot/dts/omap2420-n810.dts
+++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -8,9 +8,26 @@
 	compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
 };
 
+&omap2420_pmx {
+	mcbsp2_pins: mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1)	/* eac_ac_sclk.mcbsp2_clkx */
+			OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1)	/* eac_ac_fs.mcbsp2_fsx */
+			OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1)	/* eac_ac_din.mcbsp2_dr */
+			OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1)	/* eac_ac_dout.mcbsp2_dx */
+		>;
+	};
+};
+
 &i2c2 {
 	aic3x at 18 {
 		compatible = "tlv320aic3x";
 		reg = <0x18>;
 	};
 };
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+
+	status = "okay";
+};
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki