[alsa-devel] HP mute led for ALC286

[Takashi Iwai]

At Fri, 21 Nov 2014 07:56:29 +0000,
Kailang wrote:
> 
> Hi Takashi,
> 
> I'm sorry for that. Maybe I had not do git pull.

Applied now, thanks.


Takashi

> 
> BR,
> Kailang
>  
> > -----Original Message-----
> > From: Takashi Iwai [mailto:tiwai at suse.de] 
> > Sent: Thursday, November 20, 2014 6:06 PM
> > To: Kailang
> > Cc: (alsa-devel at alsa-project.org)
> > Subject: Re: HP mute led for ALC286
> > 
> > At Thu, 20 Nov 2014 07:04:01 +0000,
> > Kailang wrote:
> > > 
> > >  
> > > 
> > > > -----Original Message-----
> > > > From: Takashi Iwai [mailto:tiwai at suse.de]
> > > > Sent: Wednesday, November 19, 2014 7:28 PM
> > > > To: Kailang
> > > > Cc: (alsa-devel at alsa-project.org)
> > > > Subject: Re: HP mute led for ALC286
> > > > 
> > > > At Wed, 19 Nov 2014 07:13:16 +0000,
> > > > Kailang wrote:
> > > > > 
> > > > > Hi Takashi,
> > > > > 
> > > > > I had sent the discussion mail about the DMI string for HP.
> > > > > But no body response.
> > > > > So, I just send the patch to fix this issue.
> > > > 
> > > > I'd like to avoid the duplicated open codes, so could you try the 
> > > > patch below and rewrite your patch to follow this?  You'd 
> > just need 
> > > > to set like:
> > > >   spec->gpio_mute_led_mask = 0x02;
> > > >   spec->gpio_mic_led_mask = 0x20;
> > > >   pec->mute_led_polarity = 0;
> > > > then you can use the existing alc_fixup_gpio_mute_hook and 
> > > > alc_fixup_gpio_mic_mute_hook.
> > > 
> > > I modified as attach patch. ^^
> > 
> > Oh, no, I meant an additional patch on top of my previous 
> > patch, not folding into that one.
> > 
> > For your ease, I applied my patch to for-next branch now, so 
> > that you can rewrite the patch to be applicable to there.
> > 
> > 
> > thanks,
> > 
> > Takashi
> > 
> > ------Please consider the environment before printing this e-mail.
> > 
> [2 0002-supported-HP-mute-led-alc286.patch <application/octet-stream (base64)>]
>