[alsa-devel] [PATCH v2 1/2] ASoC: dt-bindings: add rockchip i2s bindings
jianqun
xjq at rock-chips.com
Fri Jul 4 09:26:36 CEST 2014
From: Jianqun Xu <xjq at rock-chips.com>
Add devicetree bindings for i2s controller found on
rk3066, rk3188 and rk3288 processors from rockchip.
Signed-off-by: Jianqun Xu <xjq at rock-chips.com>
---
Changes since v1:
- modify the description of clock-names property, adviced by Mark Rutland.
- modify the example to fit for rk3288.
.../devicetree/bindings/sound/rockchip-i2s.txt | 36 ++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.txt
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
new file mode 100644
index 0000000..9fc577d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -0,0 +1,36 @@
+* Rockchip I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital
+audio data transfer between devices in the system.
+
+Required properties:
+
+- compatible: should be one of the followings
+ - "rockchip,rk3066-i2s": for rk3066
+ - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
+ - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: Shall be "i2s_hclk" for I2S bus and "i2s_clk" for master clock
+
+Example, for rk3288 I2S controller:
+
+i2s0: i2s at ff890000 {
+ compatible = "rockchip,rk3066-i2s", "rockchip,rk3288-i2s";
+ reg = <0xff890000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&pdma1 0>, <&pdma1 1>;
+ dma-names = "rx", "tx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+};
--
1.7.9.5
More information about the Alsa-devel
mailing list