[alsa-devel] [PATCH 1/2] ASoC: dt-bindings: add rockchip i2s bindings

jianqun xjq at rock-chips.com
Tue Jul 1 10:37:39 CEST 2014


From: Jianqun Xu <xjq at rock-chips.com>

Add devicetree bindings for i2s controller found on rk3066, rk3188 and rk3288
processors from rockchip.

Signed-off-by: Jianqun Xu <xjq at rock-chips.com>
---
 .../devicetree/bindings/sound/rockchip-i2s.txt     |   45 ++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.txt

diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
new file mode 100644
index 0000000..e9ab122
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -0,0 +1,45 @@
+* Rockchip I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital audio data transfer
+between devices in the system and be invented by Philips Semiconductor.
+
+Required properties:
+
+- compatible : should be one of the following.
+   "rockchip,rk3066-i2s": for rk3066
+   "rockchip,rk3188-i2s", "rockchip,rk3066-i2s" for rk3188
+   "rockchip,rk3288-i2s", "rockchip,rk3066-i2s" for rk3288
+- reg : physical base address of the controller and length of memory mapped
+  region.
+- interrupts : The interrupt number to the cpu. The interrupt specifier format
+  depends on the interrupt controller.
+- #address-cells : should be 1.
+- #size-cells : should be 0.
+- dmas : list of DMA controller phandle and DMA request line ordered pairs.
+- dma-names : identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+  Must include the following entries:
+  - rx:
+  - tx:
+- clocks : Handle to internal work clock and master clock output to IO.
+- clock-names :
+  - "i2s_hclk": support AHB bus interface
+  - "i2s_clk": work clock for i2s controller
+
+Example:
+
+aliases {
+	i2s0 = &i2s0;
+}
+
+i2s0: i2s at ff890000 {
+	compatible = "rockchip,rk3066-i2s";
+	reg = <0xff890000 0x10000>;
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dmas = <&pdma1 0>, <&pdma1 1>;
+	dma-names = "rx", "tx";
+	clock-names = "i2s_hclk", "i2s_clk";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+};
-- 
1.7.9.5




More information about the Alsa-devel mailing list