[alsa-devel] [PATCH] ASoC: add ak4554 driver

[Kuninori Morimoto]

Hi Mark

Thank you for your reply

> > ak4554 is very simple DA/AD converter which has no setting register.
> > But, playback format is SND_SOC_DAIFMT_RIGHT_J,
> > and, capture  format is SND_SOC_DAIFMT_LEFT_J on same bit clock, LR clock.
> > Because of that, snd_soc_dai_driver consists from
> > "playback only" and "capture only" here,
> > and it has software base symmetric_rates check.
> 
> If the device is hard coded to these formats just use a single DAI
> without a set_dai_fmt() operation, either the machine can create two
> links to the DAI or things can be set up without any extra clocks so
> that both formats are met.  Otherwise this looks good apart from the
> things Lars-Peter already noticed.

OK, then, it can remove self .symmetric_rates check.
It works with my current machine.

The image is like this, is it OK ?

CPU-DAI1 (plaback only fmt = RIGHT_J) --+-- ak4554 (it doesn't have set_fmt())
                                        |
CPU-DAI2 (capture only fmt = LEFT_J) ---+

Best regards
---
Kuninori Morimoto