[alsa-devel] Conexant CX20561 - Microphone problems
Takashi Iwai
tiwai at suse.de
Tue Apr 19 08:44:10 CEST 2011
At Mon, 18 Apr 2011 19:40:26 -0400,
Shawn Starr wrote:
>
> On Tuesday, November 03, 2009 11:55:07 AM Takashi Iwai wrote:
> > At Mon, 2 Nov 2009 11:36:21 -0500,
> >
> > Shawn Starr wrote:
> > > On November 2, 2009 08:05:37 am Takashi Iwai wrote:
> > > > At Thu, 29 Oct 2009 18:59:40 -0400,
> > > >
> > > > Shawn Starr wrote:
> > > > > Hello ALSA developers,
> > > > >
> > > > > I am having problems with the microphone on the following
> > > > > hardware this is on a Lenovo W500 laptop.
> > > > >
> > > > > Card: HDA Intel
> > > > > Chip: Conexant CX20561 (Hermosa)
> > > > >
> > > > > Here is the problems im noticing:
> > > > >
> > > > > 1) If I use ALSA 'default' with the microphone I get noise
> > > > > interference on output [high/low/high/low].
> > > > >
> > > > > If I switch this to use the "ALSA Capture on HDA Intel [CONEXANT
> > > > > Analog] I get interference except it is the standard 60Hz
> > > > > electrical noise [steady noise]
> > > > >
> > > > > 2) Using the internal/external microphones gives an inconsistent
> > > > > volume. It also does not seem to work with the microphone
> > > > > cutting out so much. I need to adjust Digital + another
> > > > > microphone but it still drops capturing.
> > > > >
> > > > > Alsamixer shows: Digital/Docking Microphone/External
> > > > > Microphone/Internal Microphone
> > > > >
> > > > > Here is the module options I give to the sound driver:
> > > > >
> > > > > options snd-intel-hda enable_msi=1 power_save=10
> > > > > power_save_controller=true model=laptop index=0
> > > > >
> > > > > Assuming power saving/controller causes the microphone to cut
> > > > > out or not.
> > > > >
> > > > > 3) I'm now aware that this card has no pinouts for PCM capture
> > > > > https://bugzilla.redhat.com/show_bug.cgi?id=502293
> > > >
> > > > Could you give alsa-info.sh output? Run with --no-upload option,
> > > > and
> > > > attach the generated file.
> > >
> > > Here's the attached output,
> >
> > Judging from the pin config, in your case, "Docking" seems controlling
> > the external-mic volume. The "External Mic Volume" should be zero.
> >
>
> alsacontrol shows two 'Internal Mic' options and two 'Docking Mic' options, no
> External Mic option visible?
>
> Now using: 2.6.39-0.rc3.git2.0.fc16.x86_64
>
> While this laptop can use a docking port, I have none, although the BIOS does
> give an option to enable docking ports, I guess those don't do anything unless
> you actually dock the laptop?
Just try model=hp. This corresponds to a model without the
docking-station.
Takashi
More information about the Alsa-devel
mailing list