[alsa-devel] snd_intel_hda : broken microphone
Jerone Young
jerone.young at canonical.com
Sun May 23 18:46:09 CEST 2010
Hi,
Best to get in contact with the author of the patches to ensure you can
get a proper fix. Also what hardware do you have?
Apparently (I assume) this is not for all via sound chips so it's best
to expalin what your setup is. The output from lspci does not tell the
story on the codec at times. The best output is
from /proc/asound/card0/codec#0
Hope that helps some.
Thanks,
Jerone
On Wed, 2010-05-19 at 11:33 +0200, mutenmaster at tiscali.it wrote:
> hello people,
>
> i am really determined in letting you know, for the
> third time,
> that my front mic input does not work. i do not know if the
> rear
> one works, i suspect not, but it's not important, because
> before
> the following commit, the front mic input worked:
>
> $ sudo git bisect
> bad
> f5271101faf1655d862849f42518c2a88ef394fb
> is the first bad commit
>
> commit f5271101faf1655d862849f42518c2a88ef394fb
>
> Author: Lydia Wang
> <lydiawang at viatech.com.cn>
> Date: Sat Oct 10 19:07:
> 35 2009 +0800
>
>
> ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE
> control type
>
> Enter
> low power state if AA-Path volume is muted.
>
>
> Signed-off-by:
> Lydia Wang <lydiawang at viatech.com.cn>
>
> Signed-off-by: Logan Li
> <loganli at viatech.com.cn>
> Signed-off-by:
> Takashi Iwai <tiwai at suse.
> de>
>
> :040000 040000
> ab1ae14ff67f0b08848faeb3ad68def7f3e727f0
>
> 0bfbfde11fe32e87e8edbdb3c4d03c2d30370393 M sound
>
> i'm copypasting
> the lspci ouput, so that you can have a general idea
> of what kind of
> machine i have. please let me know if there is
> any other info you need
> to solve this bug.
>
> more details on the problem:
> doing
> $ arecord -f cd
> test.wav
>
> produces a file of 44 bytes. it's as if no microphone is
> attached
> to the jack. this behaviour has been evolving from the commit
>
> i showed you forth. at the beginning, a file with actual data was
>
> produced, but no audio came out of the speakers when reproducing
> it.
> going on with the commits, the file became 44 bytes long.
>
> yours,
>
> vasilis
>
> --
>
> $ lspci -vvv
>
> 00:00.0 Host bridge: Advanced Micro Devices
> [AMD] RS780 Host Bridge Alternate
> Subsystem: ASUSTeK Computer Inc.
> Device 83a2
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+
> 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+
> >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [c4] HyperTransport:
> Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=12 MastHost-
> DefDir- DUL-
> Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
> Link Config 0: MLWI=16bit
> DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
> IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit
> DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 3.00
>
> Link Frequency 0: [b]
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link
> Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+
> 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC-
> LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> Link Frequency 1: 200MHz
> Link
> Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1:
> 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz-
> 1.6GHz- Vend-
> Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE-
> CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
>
> Capabilities: [54] HyperTransport: UnitID Clumping
> Capabilities: [40]
> HyperTransport: Retry Mode
> Capabilities: [9c] HyperTransport: #1a
>
> Capabilities: [f8] HyperTransport: #1c
>
> 00:02.0 PCI bridge: Advanced
> Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if
> 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+
> 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus:
> primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind
> bridge: 0000d000-0000dfff
> Memory behind bridge: fea00000-feafffff
>
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
>
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort-
> >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1-
> D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-
> Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port
> (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
> L0s <64ns, L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors:
> Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag-
> PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128
> bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep+ BwNot+
>
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s,
> Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
> SltCap:
> AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 2,
> PowerLimit 75.000000; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn-
> PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd
> Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn-
> PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+
> LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID
> 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Not
> Supported, TimeoutDis- ARIFwd-
> DevCtl2: Completion Timeout: 50us to
> 50ms, TimeoutDis- ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s,
> EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
> Transmit
> Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level:
> -3.5dB
> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit-
> Count=1/1 Enable+
> Address: fee0f00c Data: 4159
> Capabilities: [b0]
> Subsystem: ASUSTeK Computer Inc. Device 83a2
> Capabilities: [b8]
> HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100] Vendor
> Specific Information <?>
> Capabilities: [110] Virtual Channel <?>
>
> Kernel driver in use: pcieport-driver
>
> 00:0a.0 PCI bridge: Advanced
> Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) (prog-if 00
> [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+
> 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus:
> primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind
> bridge: 0000e000-0000efff
> Memory behind bridge: feb00000-febfffff
>
> Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
>
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort-
> >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1-
> D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-
> Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port
> (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
> L0s <64ns, L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors:
> Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag-
> PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128
> bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep+ BwNot+
>
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s,
> Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
> SltCap:
> AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # a,
> PowerLimit 25.000000; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn-
> PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd
> Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn-
> PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+
> LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID
> 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Not
> Supported, TimeoutDis- ARIFwd-
> DevCtl2: Completion Timeout: 50us to
> 50ms, TimeoutDis- ARIFwd-
> LnkCtl2: Target Link Speed: 2.5GT/s,
> EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit
> Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level:
> -6dB
> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit-
> Count=1/1 Enable+
> Address: fee0f00c Data: 4161
> Capabilities: [b0]
> Subsystem: ASUSTeK Computer Inc. Device 83a2
> Capabilities: [b8]
> HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100] Vendor
> Specific Information <?>
> Capabilities: [110] Virtual Channel <?>
>
> Kernel driver in use: pcieport-driver
>
> 00:11.0 SATA controller: ATI
> Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01
> [AHCI 1.0])
> Subsystem: ASUSTeK Computer Inc. Device 8389
> Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
> SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency:
> 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
>
> Region 0: I/O ports at c000 [size=8]
> Region 1: I/O ports at b000
> [size=4]
> Region 2: I/O ports at a000 [size=8]
> Region 3: I/O ports at
> 9000 [size=4]
> Region 4: I/O ports at 8000 [size=16]
> Region 5: Memory
> at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [60]
> Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0
> DScale=0 PME-
> Capabilities: [70] SATA HBA <?>
> Kernel driver in use:
> ahci
>
> 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB
> OHCI0 Controller (prog-if 10 [OHCI])
> Subsystem: ASUSTeK Computer Inc.
> Device 8389
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap-
> 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt:
> pin A routed to IRQ 16
> Region 0: Memory at fe9fe000 (32-bit, non-
> prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel
> modules: ohci-hcd
>
> 00:12.1 USB Controller: ATI Technologies Inc SB700
> USB OHCI1 Controller (prog-if 10 [OHCI])
> Subsystem: ASUSTeK Computer
> Inc. Device 8389
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap-
> 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt:
> pin A routed to IRQ 16
> Region 0: Memory at fe9fd000 (32-bit, non-
> prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel
> modules: ohci-hcd
>
> 00:12.2 USB Controller: ATI Technologies Inc
> SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
> Subsystem: ASUSTeK
> Computer Inc. Device 8389
> Control: I/O- Mem+ BusMaster+ SpecCycle-
> MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status:
> Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
>
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at fe9ff800 (32-
> bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management
> version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,
> D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge:
> PM- B3+
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel
> driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:13.0 USB
> Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-
> if 10 [OHCI])
> Subsystem: ASUSTeK Computer Inc. Device 8389
> Control:
> I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
> SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency:
> 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
>
> Region 0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K]
>
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:13.1 USB
> Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10
> [OHCI])
> Subsystem: ASUSTeK Computer Inc. Device 8389
> Control: I/O+
> Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+
> FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency:
> 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
>
> Region 0: Memory at fe9fb000 (32-bit, non-prefetchable) [size=4K]
>
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:13.2 USB
> Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-
> if 20 [EHCI])
> Subsystem: ASUSTeK Computer Inc. Device 8389
> Control:
> I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
> SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency:
> 64, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 19
>
> Region 0: Memory at fe9ff400 (32-bit, non-prefetchable) [size=256]
>
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+
> D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-
> Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4]
> Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci_hcd
> Kernel
> modules: ehci-hcd
>
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus
> Controller (rev 3c)
> Subsystem: ASUSTeK Computer Inc. Device 8389
>
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B-
> ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
>
> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>
> 00:14.1
> IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if
> 8a [Master SecP PriP])
> Subsystem: ASUSTeK Computer Inc. Device 8389
>
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B-
> ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 64
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at
> 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O
> ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4:
> I/O ports at ff00 [size=16]
> Capabilities: [70] Message Signalled
> Interrupts: Mask- 64bit- Count=1/1 Enable-
> Address: 00000000 Data:
> 0000
> Kernel driver in use: pata_atiixp
>
> 00:14.2 Audio device: ATI
> Technologies Inc SBx00 Azalia (Intel HDA)
> Subsystem: ASUSTeK Computer
> Inc. Device 836c
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+
> 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt:
> pin ? routed to IRQ 16
> Region 0: Memory at fe9f4000 (64-bit, non-
> prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
>
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,
> D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver
> in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 00:14.3 ISA bridge:
> ATI Technologies Inc SB700/SB800 LPC host controller
> Subsystem:
> ASUSTeK Computer Inc. Device 8389
> Control: I/O+ Mem+ BusMaster+
> SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:14.4 PCI bridge:
> ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive
> decode])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF-
> FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> INTx-
> Latency: 64
> Bus: primary=00, secondary=03, subordinate=03, sec-
> latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge:
> fff00000-000fffff
> Prefetchable memory behind bridge: fff00000-000fffff
>
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA-
> MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat-
> DiscTmrSERREn-
>
> 00:14.5 USB Controller: ATI Technologies Inc
> SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
> Subsystem:
> ASUSTeK Computer Inc. Device 8389
> Control: I/O- Mem+ BusMaster+
> SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64
> bytes
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at fe9fa000
> (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> Kernel modules: ohci-hcd
>
> 00:18.0 Host bridge: Advanced Micro Devices
> [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport
> Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+
> 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or
> Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
> HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail-
> Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
> Link Config:
> MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit
> DwFcOutEn-
> Revision ID: 3.00
> Link Frequency: [b]
> Link Error:
> <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz-
> 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
>
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS-
> UCnfE-
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h
> [Opteron, Athlon64, Sempron] Address Map
> Control: I/O- Mem- BusMaster-
> SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge: Advanced
> Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM
> Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF-
> FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> INTx-
> Kernel modules: amd64_edac_mod
>
> 00:18.3 Host bridge: Advanced
> Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron]
> Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle-
> MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status:
> Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
>
> 00:
> 18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] Link Control
> Control: I/O- Mem- BusMaster-
> SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 01:00.0 VGA compatible
> controller: ATI Technologies Inc Device 954f (prog-if 00 [VGA
> controller])
> Subsystem: ASUSTeK Computer Inc. Device 02a8
> Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
> SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0,
> Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0:
> Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 2: Memory
> at feaf0000 (64-bit, non-prefetchable) [size=64K]
> Region 4: I/O ports
> at d000 [size=256]
> Expansion ROM at feac0000 [disabled] [size=128K]
>
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+
> D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-
> Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Legacy
> Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
> L0s <4us, L1 unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr-
> UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0,
> Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64
> bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis-
> BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not
> Supported, TimeoutDis-
> DevCtl2: Completion Timeout: 50us to 50ms,
> TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal
> Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance
> De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB
>
> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [100]
> Vendor Specific Information <?>
>
> 01:00.1 Audio device: ATI Technologies
> Inc Device aa38
> Subsystem: ASUSTeK Computer Inc. Device aa38
> Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
> SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0,
> Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 28
> Region 0:
> Memory at feaec000 (64-bit, non-prefetchable) [size=16K]
> Capabilities:
> [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+
> AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable-
> DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Legacy Endpoint,
> MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
> L1 unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes,
> MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM
> L0s L1, Latency L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
>
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s,
> Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2:
> Completion Timeout: Not Supported, TimeoutDis-
> DevCtl2: Completion
> Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5
> GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-
> emphasis Level: -6dB
> Capabilities: [a0] Message Signalled Interrupts:
> Mask- 64bit+ Count=1/1 Enable+
> Address: 00000000fee0f00c Data: 4189
>
> Capabilities: [100] Vendor Specific Information <?>
> Kernel driver in
> use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 02:00.0 Ethernet
> controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
> Gigabit Ethernet controller (rev 03)
> Subsystem: ASUSTeK Computer Inc.
> Device 83a3
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+
> 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt:
> pin A routed to IRQ 27
> Region 0: I/O ports at e800 [size=256]
> Region
> 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
> Region 4:
> Memory at fdff8000 (64-bit, prefetchable) [size=16K]
> Expansion ROM at
> febf0000 [disabled] [size=64K]
> Capabilities: [40] Power Management
> version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,
> D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
> Enable+
> Address: 00000000fee0f00c Data: 4179
> Capabilities: [70]
> Express (v2) Endpoint, MSI 01
> DevCap: MaxPayload 256 bytes, PhantFunc
> 0, Latency L0s <512ns, L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd-
> RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>
> MaxPayload 128 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr+
> UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0,
> Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
>
> ClockPM+ Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64
> bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis-
> BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not
> Supported, TimeoutDis+
> DevCtl2: Completion Timeout: 50us to 50ms,
> TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal
> Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance
> De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB
>
> Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
> Vector table: BAR=4
> offset=00000000
> PBA: BAR=4 offset=00000800
> Capabilities: [cc] Vital
> Product Data <?>
> Capabilities: [100] Advanced Error Reporting
> UESta:
> DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
> UnsupReq- ACSVoil-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
> UESvrt: DLP+ SDES+
> TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq-
> ACSVoil-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
> ChkEn-
> Capabilities: [140] Virtual Channel <?>
> Capabilities: [160]
> Device Serial Number 00-00-00-00-00-00-00-00
> Kernel driver in use:
> r8169
>
>
>
>
> Risparmia con Tutto Incluso Light: telefono + adsl 8 mega a soli 14,95 € al mese.
>
> Gratis la Sim Tiscali Mobile con 25 euro di traffico!
>
> L'offerta è valida solo se attivi entro il 20/05/10
>
> http://abbonati.tiscali.it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT.mc_id=01fw
> _______________________________________________ Alsa-devel mailing list Alsa-devel at alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
More information about the Alsa-devel
mailing list