[alsa-devel] snd_intel_hda : broken microphone
mutenmaster at tiscali.it
mutenmaster at tiscali.it
Wed May 19 11:33:07 CEST 2010
hello people,
i am really determined in letting you know, for the
third time,
that my front mic input does not work. i do not know if the
rear
one works, i suspect not, but it's not important, because
before
the following commit, the front mic input worked:
$ sudo git bisect
bad
f5271101faf1655d862849f42518c2a88ef394fb
is the first bad commit
commit f5271101faf1655d862849f42518c2a88ef394fb
Author: Lydia Wang
<lydiawang at viatech.com.cn>
Date: Sat Oct 10 19:07:
35 2009 +0800
ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE
control type
Enter
low power state if AA-Path volume is muted.
Signed-off-by:
Lydia Wang <lydiawang at viatech.com.cn>
Signed-off-by: Logan Li
<loganli at viatech.com.cn>
Signed-off-by:
Takashi Iwai <tiwai at suse.
de>
:040000 040000
ab1ae14ff67f0b08848faeb3ad68def7f3e727f0
0bfbfde11fe32e87e8edbdb3c4d03c2d30370393 M sound
i'm copypasting
the lspci ouput, so that you can have a general idea
of what kind of
machine i have. please let me know if there is
any other info you need
to solve this bug.
more details on the problem:
doing
$ arecord -f cd
test.wav
produces a file of 44 bytes. it's as if no microphone is
attached
to the jack. this behaviour has been evolving from the commit
i showed you forth. at the beginning, a file with actual data was
produced, but no audio came out of the speakers when reproducing
it.
going on with the commits, the file became 44 bytes long.
yours,
vasilis
--
$ lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices
[AMD] RS780 Host Bridge Alternate
Subsystem: ASUSTeK Computer Inc.
Device 83a2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+
66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+
>SERR- <PERR- INTx-
Latency: 0
Capabilities: [c4] HyperTransport:
Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=12 MastHost-
DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit
DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit
DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link
Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC-
LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link
Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1:
200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz-
1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE-
CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40]
HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c
00:02.0 PCI bridge: Advanced
Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+
66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
>SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus:
primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind
bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort-
>Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1-
D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-
Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port
(Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors:
Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag-
PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128
bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1,
Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s,
Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap:
AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2,
PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn-
PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd
Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn-
PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+
LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID
0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not
Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to
50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s,
EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit
Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level:
-3.5dB
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit-
Count=1/1 Enable+
Address: fee0f00c Data: 4159
Capabilities: [b0]
Subsystem: ASUSTeK Computer Inc. Device 83a2
Capabilities: [b8]
HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor
Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0a.0 PCI bridge: Advanced
Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+
66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
>SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus:
primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind
bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort-
>Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1-
D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-
Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port
(Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors:
Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag-
PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128
bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1,
Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s,
Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap:
AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # a,
PowerLimit 25.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn-
PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd
Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn-
PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+
LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID
0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not
Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to
50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s,
EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit
Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level:
-6dB
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit-
Count=1/1 Enable+
Address: fee0f00c Data: 4161
Capabilities: [b0]
Subsystem: ASUSTeK Computer Inc. Device 83a2
Capabilities: [b8]
HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor
Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:11.0 SATA controller: ATI
Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01
[AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 8389
Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency:
64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000
[size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at
9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory
at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60]
Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0
DScale=0 PME-
Capabilities: [70] SATA HBA <?>
Kernel driver in use:
ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.
Device 8389
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap-
66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
>SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt:
pin A routed to IRQ 16
Region 0: Memory at fe9fe000 (32-bit, non-
prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel
modules: ohci-hcd
00:12.1 USB Controller: ATI Technologies Inc SB700
USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer
Inc. Device 8389
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap-
66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
>SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt:
pin A routed to IRQ 16
Region 0: Memory at fe9fd000 (32-bit, non-
prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel
modules: ohci-hcd
00:12.2 USB Controller: ATI Technologies Inc
SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK
Computer Inc. Device 8389
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status:
Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9ff800 (32-
bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management
version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,
D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge:
PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel
driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:13.0 USB
Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-
if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Control:
I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency:
64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB
Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10
[OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Control: I/O+
Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+
FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency:
64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB
Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-
if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Control:
I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency:
64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe9ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+
D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-
Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4]
Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel
modules: ehci-hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus
Controller (rev 3c)
Subsystem: ASUSTeK Computer Inc. Device 8389
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B-
ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
00:14.1
IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if
8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device 8389
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B-
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at
01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O
ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4:
I/O ports at ff00 [size=16]
Capabilities: [70] Message Signalled
Interrupts: Mask- 64bit- Count=1/1 Enable-
Address: 00000000 Data:
0000
Kernel driver in use: pata_atiixp
00:14.2 Audio device: ATI
Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer
Inc. Device 836c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+
66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort-
>SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt:
pin ? routed to IRQ 16
Region 0: Memory at fe9f4000 (64-bit, non-
prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,
D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver
in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge:
ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem:
ASUSTeK Computer Inc. Device 8389
Control: I/O+ Mem+ BusMaster+
SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge:
ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive
decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-
latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge:
fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA-
MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
00:14.5 USB Controller: ATI Technologies Inc
SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem:
ASUSTeK Computer Inc. Device 8389
Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64
bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9fa000
(32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:18.0 Host bridge: Advanced Micro Devices
[AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport
Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+
66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
>SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or
Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail-
Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
Link Config:
MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit
DwFcOutEn-
Revision ID: 3.00
Link Frequency: [b]
Link Error:
<Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz-
400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS-
UCnfE-
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h
[Opteron, Athlon64, Sempron] Address Map
Control: I/O- Mem- BusMaster-
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced
Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM
Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF-
FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx-
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced
Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron]
Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status:
Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
00:
18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
Control: I/O- Mem- BusMaster-
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible
controller: ATI Technologies Inc Device 954f (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device 02a8
Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0,
Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0:
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory
at feaf0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports
at d000 [size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+
D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-
Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy
Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr-
UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0,
Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64
bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis-
BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not
Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms,
TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal
Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance
De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100]
Vendor Specific Information <?>
01:00.1 Audio device: ATI Technologies
Inc Device aa38
Subsystem: ASUSTeK Computer Inc. Device aa38
Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0,
Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 28
Region 0:
Memory at feaec000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
[50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable-
DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint,
MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes,
MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM
L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s,
Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2:
Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion
Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5
GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-
emphasis Level: -6dB
Capabilities: [a0] Message Signalled Interrupts:
Mask- 64bit+ Count=1/1 Enable+
Address: 00000000fee0f00c Data: 4189
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in
use: HDA Intel
Kernel modules: snd-hda-intel
02:00.0 Ethernet
controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet controller (rev 03)
Subsystem: ASUSTeK Computer Inc.
Device 83a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+
66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
>SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt:
pin A routed to IRQ 27
Region 0: I/O ports at e800 [size=256]
Region
2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4:
Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at
febf0000 [disabled] [size=64K]
Capabilities: [40] Power Management
version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,
D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
Enable+
Address: 00000000fee0f00c Data: 4179
Capabilities: [70]
Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc
0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd-
RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+
UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0,
Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64
bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis-
BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not
Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms,
TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal
Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance
De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
Vector table: BAR=4
offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital
Product Data <?>
Capabilities: [100] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES+
TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq-
ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
Capabilities: [140] Virtual Channel <?>
Capabilities: [160]
Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use:
r8169
Risparmia con Tutto Incluso Light: telefono + adsl 8 mega a soli 14,95 € al mese.
Gratis la Sim Tiscali Mobile con 25 euro di traffico!
L'offerta è valida solo se attivi entro il 20/05/10
http://abbonati.tiscali.it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT.mc_id=01fw
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lspci
Type: application/octet-stream
Size: 24941 bytes
Desc: not available
Url : http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20100519/9d608cba/attachment-0001.dll
More information about the Alsa-devel
mailing list