Mediatek ADSP IPC is used to send notification or short message between processors with dsp.ยท
It will place the message to the share buffer and will access the ADSP mailbox registers to kick dsp.
Two mailboxes used to send notification or short message between processors with dsp
changes since v4: - use switch ... case in adsp_ipc_recv - add error handling path for chan_name pointer - refine some code to be concise
changes since v3: - reorder MTK_ADSP_IPC_MBOX config - remove some redundant code - remove lock in mtk-adsp-mailbox
changes since v2: - separate adsp_mailbox into two instances
changes since v1: - fix dt_binding_check error
Allen-KH Cheng (3): dt-bindings: mediatek: add adsp-mbox document firmware: mediatek: add adsp ipc protocol interface mailbox: mediatek: add support for adsp mailbox controller
.../bindings/mailbox/mtk,adsp-mbox.yaml | 52 +++++ drivers/firmware/Kconfig | 1 + drivers/firmware/Makefile | 1 + drivers/firmware/mediatek/Kconfig | 9 + drivers/firmware/mediatek/Makefile | 2 + drivers/firmware/mediatek/mtk-adsp-ipc.c | 138 ++++++++++++++ drivers/mailbox/Kconfig | 7 + drivers/mailbox/Makefile | 2 + drivers/mailbox/mtk-adsp-mailbox.c | 178 ++++++++++++++++++ .../linux/firmware/mediatek/mtk-adsp-ipc.h | 70 +++++++ 10 files changed, 460 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml create mode 100644 drivers/firmware/mediatek/Kconfig create mode 100644 drivers/firmware/mediatek/Makefile create mode 100644 drivers/firmware/mediatek/mtk-adsp-ipc.c create mode 100644 drivers/mailbox/mtk-adsp-mailbox.c create mode 100644 include/linux/firmware/mediatek/mtk-adsp-ipc.h