On Tue, Jul 19, 2022 at 7:41 PM Mark Brown <broonie@kernel.org> wrote:
On Tue, Jul 19, 2022 at 01:26:06PM +0800, Shengjiu Wang wrote:
Not a thorough review, just a few nitpicks:
Thanks.
+#define MBOX_SIZE 0x1000 + +struct arm_smccc_res smc_resource;
This should be static shouldn't it?
I will move it to function as a local variable.
+static void imx8ulp_dsp_handle_reply(struct imx_dsp_ipc *ipc) +{ + struct imx8ulp_priv *priv = imx_dsp_get_data(ipc); + unsigned long flags; + + spin_lock_irqsave(&priv->sdev->ipc_lock, flags); + + imx8ulp_get_reply(priv->sdev); + snd_sof_ipc_reply(priv->sdev, 0); + spin_unlock_irqrestore(&priv->sdev->ipc_lock, flags);
Minor nitpick but a blank line before the unlock to match the one after the lock would be a bit easier to read.
ok, will update
+ regmap_update_bits(priv->regmap, SYSCTRL0, EXECUTE_BIT, EXECUTE_BIT); + usleep_range(1, 2); + + arm_smccc_smc(FSL_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &smc_resource);
You need linux/arm-smccc.h for this (as 0day said).
Yes, right.
+ if (ret) { + dev_err(&pdev->dev, "failed to init reserved memory region %d\n", ret); + goto exit_pdev_unregister; + } + + priv->clks->dsp_clks = imx8ulp_dsp_clks; + priv->clks->num_dsp_clks = ARRAY_SIZE(imx8ulp_dsp_clks); + + ret = imx8_parse_clocks(sdev, priv->clks); + if (ret < 0) + goto exit_pdev_unregister; + + ret = imx8_enable_clocks(sdev, priv->clks); + if (ret < 0) + goto exit_pdev_unregister;
We're registering the platform device before we enable the clocks - is that safe?
Yes, it is safe.
+static int imx8ulp_remove(struct snd_sof_dev *sdev) +{ + struct imx8ulp_priv *priv = sdev->pdata->hw_pdata; + + platform_device_unregister(priv->ipc_dev); + + return 0; +}
Could we just use devm? I'm not seeing an ordering issue but I might be missing something.
Which devm do you mean? There seems no devm_platform_device_register_data(). best regards wang shengjiu