- Sound-open-firmware - mailman.alsa-project.org

[Sound-open-firmware] [PATCH v2 0/7] SSP: baytrail 24 bits support
by Keyon Jie 23 Dec '16

23 Dec '16

This series is created to change the SSP format setting for both Tx and Rx, and it is verified on MinnowMax + ALC5651 codec with I2S stereo both SSP_CLK_EXT and SSP_CLK_AUDIO mode. Changes including: 1. change ssp clock from 25M to 19.2M; 2. add 16bit <==> 24bit volume converting functions; 3. change to get dai format from host; 4. change to get ssp stream format from host; 5. remove the shim SSP divider and use SSCR0.SCR for BCLK generating. changes from v1: 1. change to make dai format configurable; 2. change to make ssp stream format configurable; 3. clean shim SSP divider code; 4. optimize volume copy functions. Keyon Jie (7): ssp: switch to use SCR for BCLK generation. platform: switch default ssp clock to 19.2M volume: add 16bit<==>24bit volume copy function and mapping ssp: switch dai format form PCM B mode to normal I2S mode intel-ipc: get dai format from ipc dai: add stream_format to dai_data for codec stream intel-ipc: change to get ssp stream format from ipc src/audio/dai.c | 10 ++ src/audio/volume.c | 119 ++++++++++++--------- src/drivers/ssp.c | 5 +- src/include/reef/dai.h | 1 + src/include/reef/stream.h | 20 ++++ src/include/uapi/intel-ipc.h | 2 + src/ipc/intel-ipc.c | 32 +++--- src/platform/baytrail/include/platform/platform.h | 10 +- src/platform/baytrail/platform.c | 120 ---------------------- 9 files changed, 126 insertions(+), 193 deletions(-) -- 2.7.4

3 15

[Sound-open-firmware] [PATCH] version: improve git version for build and IPC
by Liam Girdwood 22 Dec '16

22 Dec '16

Improve the git version and include last commit for IPC version message. Signed-off-by: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> --- .gitignore | 3 + Makefile.am | 13 ++-- configure.ac | 6 +- git-version-gen | 170 ---------------------------------------------------- git-version.sh | 10 ++++ src/ipc/intel-ipc.c | 3 +- 6 files changed, 26 insertions(+), 179 deletions(-) delete mode 100755 git-version-gen create mode 100755 git-version.sh diff --git a/.gitignore b/.gitignore index 5cb1d71..9223f60 100644 --- a/.gitignore +++ b/.gitignore @@ -12,6 +12,7 @@ *.rom *.man .version +.tarball-version Makefile Makefile.in @@ -27,9 +28,11 @@ CHANGELOG ltmain.sh m4/* libtool +src/include/version.h autom4te* config.* *.gz *.xz src/arch/xtensa/reef +reef-v* diff --git a/Makefile.am b/Makefile.am index b3dcce6..c47580e 100644 --- a/Makefile.am +++ b/Makefile.am @@ -15,9 +15,12 @@ export ARCH_INCDIR = \ export PLATFORM_INCDIR = \ -I $(SRC_DIR)/platform/$(PLATFORM)/include -BUILT_SOURCES = $(top_srcdir)/.version -$(top_srcdir)/.version: - echo $(VERSION) > $@-t && mv $@-t $@ +BUILT_SOURCES = $(top_srcdir)/src/include/version.h + +$(top_srcdir)/src/include/version.h: + ./git-version.sh + dist-hook: - echo $(VERSION) > $(distdir)/.tarball-version - echo $(VERSION) > $(distdir)/.version + ./git-version.sh + cat .version > $(distdir)/.tarball-version + cat .version > $(distdir)/.version diff --git a/configure.ac b/configure.ac index 71e7795..7c1acf4 100644 --- a/configure.ac +++ b/configure.ac @@ -1,6 +1,6 @@ AC_PREREQ([2.69]) -AC_INIT([Reef],[m4_esyscmd(./git-version-gen .tarball-version)],[sound-open-firmware(a)alsa-project.org]) +AC_INIT([Reef],[m4_esyscmd(./git-version.sh)],[sound-open-firmware(a)alsa-project.org]) AC_CONFIG_SRCDIR([src/init/init.c]) AC_CONFIG_HEADERS([src/include/config.h]) AC_CONFIG_MACRO_DIRS([m4]) @@ -10,8 +10,8 @@ AM_INIT_AUTOMAKE([foreign 1.11 -Wall -Wno-portability subdir-objects silent-rule AM_MAINTAINER_MODE([enable]) # get version info from git -m4_define(reef_major, `echo $VERSION | cut -d. -f1 | cut -d- -f1`) -m4_define(reef_minor, `echo $VERSION | cut -d. -f2 | cut -d- -f1`) +m4_define(reef_major, `cat .version | cut -dv -f2 | cut -d. -f1`) +m4_define(reef_minor, `cat .version | cut -d. -f2 | cut -d- -f1`) AC_DEFINE_UNQUOTED([REEF_MAJOR], reef_major, [Reef major version]) AC_DEFINE_UNQUOTED([REEF_MINOR], reef_minor, [Reef minor version]) diff --git a/git-version-gen b/git-version-gen deleted file mode 100755 index 7546884..0000000 --- a/git-version-gen +++ /dev/null @@ -1,170 +0,0 @@ -#!/bin/sh -# Print a version string. -scriptversion=2012-09-25.20 - -# Copyright (C) 2007-2008 Free Software Foundation -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see <http://www.gnu.org/licenses/>. - -# This script is derived from GIT-VERSION-GEN from GIT: http://git.or.cz/. -# It may be run two ways: -# - from a git repository in which the "git describe" command below -# produces useful output (thus requiring at least one signed tag) -# - from a non-git-repo directory containing a .tarball-version file, which -# presumes this script is invoked like "./git-version-gen .tarball-version". - -# In order to use intra-version strings in your project, you will need two -# separate generated version string files: -# -# .tarball-version - present only in a distribution tarball, and not in -# a checked-out repository. Created with contents that were learned at -# the last time autoconf was run, and used by git-version-gen. Must not -# be present in either $(srcdir) or $(builddir) for git-version-gen to -# give accurate answers during normal development with a checked out tree, -# but must be present in a tarball when there is no version control system. -# Therefore, it cannot be used in any dependencies. GNUmakefile has -# hooks to force a reconfigure at distribution time to get the value -# correct, without penalizing normal development with extra reconfigures. -# -# .version - present in a checked-out repository and in a distribution -# tarball. Usable in dependencies, particularly for files that don't -# want to depend on config.h but do want to track version changes. -# Delete this file prior to any autoconf run where you want to rebuild -# files to pick up a version string change; and leave it stale to -# minimize rebuild time after unrelated changes to configure sources. -# -# It is probably wise to add these two files to .gitignore, so that you -# don't accidentally commit either generated file. -# -# Use the following line in your configure.ac, so that $(VERSION) will -# automatically be up-to-date each time configure is run (and note that -# since configure.ac no longer includes a version string, Makefile rules -# should not depend on configure.ac for version updates). -# -# AC_INIT([GNU project], -# m4_esyscmd([build-aux/git-version-gen .tarball-version]), -# [bug-project@example]) -# -# Then use the following lines in your Makefile.am, so that .version -# will be present for dependencies, and so that .tarball-version will -# exist in distribution tarballs. -# -# BUILT_SOURCES = $(top_srcdir)/.version -# $(top_srcdir)/.version: -# echo $(VERSION) > $@-t && mv $@-t $@ -# dist-hook: -# echo $(VERSION) > $(distdir)/.tarball-version -# echo $(VERSION) > $(distdir)/.version - -case $# in - 1) ;; - *) echo 1>&2 "Usage: $0 \$srcdir/.tarball-version"; exit 1;; -esac - -tarball_version_file=$1 -nl=' -' -v= - -# First see if there is a tarball-only version file. -# then try "git describe", then default. -if test -f $tarball_version_file -then - v=`cat $tarball_version_file` || exit 1 - case $v in - *$nl*) v= ;; # reject multi-line output - [0-9]*) ;; - *) v= ;; - esac - test -z "$v" \ - && echo "$0: WARNING: $tarball_version_file seems to be damaged" 1>&2 -fi - -# This is presently used by the GNOME-OSTree build system; it -# helps support the case where the meta-build system has already -# determined the git revision, but we may not be able to run "git describe" -# because we're inside a chroot. -if test -n "$GIT_DESCRIBE_FOR_BUILD"; -then - v=$GIT_DESCRIBE_FOR_BUILD -fi - -if test -n "$v" -then - : # use $v -elif test -e .git \ - && v=`git describe --abbrev=4 --match='v[0-9]*' HEAD 2>/dev/null` \ - && [ -n "$v" ] -then - # If we are on a "dev" tag, we need to check that it is not the same - # reference as the a previous version tag (this only happens when we are - # working with a release tag). - # NB The below trick relies on the $v being an exact tag to work which - # will only work when HEAD == tag. When further commits have been made on top - # of the tag, the $v will be supplimented with the number of commits since - # that tag and the commit ref of the most recent commit and thus will - # fail the test below (as intended) - v2=`git describe --abbrev=4 --match='v[0-9]\.[0-9]' --contains $v 2>/dev/null | cut -d'^' -f1` - [ -n "$v2" ] && v=$v2 - - # Is this a new git that lists number of commits since the last - # tag or the previous older version that did not? - # Newer: v6.10-77-g0f8faeb - # Older: v6.10-g0f8faeb -# case $v in -# *-*-*) : git describe is okay three part flavor ;; -# *-*) -# : git describe is older two part flavor -# # Recreate the number of commits and rewrite such that the -# # result is the same as if we were using the newer version -# # of git describe. -# vtag=`echo "$v" | sed 's/-.*//'` -# numcommits=`git rev-list "$vtag"..HEAD | wc -l` -# v=`echo "$v" | sed "s/$.*$-$.*$/\1-$numcommits-\2/"`; -# ;; -# esac - - # Change the first '-' to a '.', so version-comparing tools work properly. - # Remove the "g" in git describe's output string, to save a byte. -# v=`echo "$v" | sed 's/-/./;s/$.*$-g/\1-/'`; - : -else - echo 1>&2 "$0: Failed to determine git revision" - exit 1 -fi - -v=`echo "$v" |sed 's/^v//'` - -# Don't declare a version "dirty" merely because a time stamp has changed. -git status > /dev/null 2>&1 - -dirty=`sh -c 'git diff-index --name-only HEAD' 2>/dev/null` || dirty= -case "$dirty" in - '') ;; - *) # Append the suffix only if there isn't one already. - case $v in - *-dirty) ;; - *) v="$v-dirty" ;; - esac ;; -esac - -# Omit the trailing newline, so that m4_esyscmd can use the result directly. -echo "$v" | tr -d '\012' - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/git-version.sh b/git-version.sh new file mode 100755 index 0000000..f8f1e58 --- /dev/null +++ b/git-version.sh @@ -0,0 +1,10 @@ + +# version for configure +echo -n `git describe --abbrev=4` + +# version for make dist +git describe --abbrev=4 > .version +git describe --abbrev=4 > .tarball-version + +# git commit for IPC +echo "#define REEF_BUILD \"`git describe --abbrev=4 | cut -d- -f3`\"" > src/include/version.h diff --git a/src/ipc/intel-ipc.c b/src/ipc/intel-ipc.c index b7ecbba..6f5c54f 100644 --- a/src/ipc/intel-ipc.c +++ b/src/ipc/intel-ipc.c @@ -59,6 +59,7 @@ #include <uapi/intel-ipc.h> #include <reef/intel-ipc.h> #include <config.h> +#include <version.h> /* convert DSP mailbox address to host offset */ #define to_host_offset(_s) \ @@ -123,7 +124,7 @@ static const struct ipc_intel_ipc_fw_version fw_version = { .minor = REEF_MINOR, .major = REEF_MAJOR, .type = 0, - .fw_build_hash = VERSION, + .fw_build_hash = REEF_BUILD, .fw_log_providers_hash = 0, }; -- 2.9.3

1 0

[Sound-open-firmware] [PATCH] dma: Add support for callback DMA reload.
by Liam Girdwood 22 Dec '16

22 Dec '16

Add support to immediately reload the DMA during a DMA transfer completion callback. This allows components to respond quickly to any physical DMA copy updates i.e. period split over two non continuous physical host pages. Signed-off-by: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> --- src/audio/dai.c | 2 +- src/drivers/dw-dma.c | 53 ++++++++++++++++++++++++++++++++------ src/include/reef/audio/component.h | 3 ++- src/include/reef/dma.h | 5 ++-- src/ipc/intel-ipc.c | 2 +- 5 files changed, 52 insertions(+), 13 deletions(-) diff --git a/src/audio/dai.c b/src/audio/dai.c index afa1be1..7bbde08 100644 --- a/src/audio/dai.c +++ b/src/audio/dai.c @@ -68,7 +68,7 @@ struct dai_data { }; /* this is called by DMA driver every time descriptor has completed */ -static void dai_dma_cb(void *data, uint32_t type) +static void dai_dma_cb(void *data, uint32_t type, struct dma_sg_elem *next) { struct comp_dev *dev = (struct comp_dev *)data; struct dai_data *dd = comp_get_drvdata(dev); diff --git a/src/drivers/dw-dma.c b/src/drivers/dw-dma.c index 8834ca3..ecd152d 100644 --- a/src/drivers/dw-dma.c +++ b/src/drivers/dw-dma.c @@ -184,7 +184,7 @@ struct dma_chan_data { struct work work; - void (*cb)(void *data, uint32_t type); /* client callback function */ + void (*cb)(void *data, uint32_t type, struct dma_sg_elem *next); /* client callback function */ void *cb_data; /* client callback data */ int cb_type; /* callback type */ }; @@ -195,7 +195,9 @@ struct dma_pdata { uint32_t class; /* channel class - set for controller atm */ }; -static inline void dw_dma_chan_reload(struct dma *dma, int channel); +static inline void dw_dma_chan_reload_lli(struct dma *dma, int channel); +static inline void dw_dma_chan_reload_next(struct dma *dma, int channel, + struct dma_sg_elem *next); static inline void dw_write(struct dma *dma, uint32_t reg, uint32_t value) { @@ -385,6 +387,7 @@ out: static int dw_dma_release(struct dma *dma, int channel) { struct dma_pdata *p = dma_get_drvdata(dma); + struct dma_sg_elem next; uint32_t flags; spin_lock_irq(&dma->lock, flags); @@ -393,8 +396,8 @@ static int dw_dma_release(struct dma *dma, int channel) if (p->chan[channel].status == DMA_STATUS_PAUSED) { if (p->chan[channel].cb && p->chan[channel].cb_type & DMA_IRQ_TYPE_LLIST) - p->chan[channel].cb(p->chan[channel].cb_data, DMA_IRQ_TYPE_LLIST); - dw_dma_chan_reload(dma, channel); + p->chan[channel].cb(p->chan[channel].cb_data, DMA_IRQ_TYPE_LLIST, &next); + dw_dma_chan_reload_lli(dma, channel); } /* resume and reload DMA */ @@ -711,7 +714,8 @@ static int dw_dma_pm_context_store(struct dma *dma) } static void dw_dma_set_cb(struct dma *dma, int channel, int type, - void (*cb)(void *data, uint32_t type), void *data) + void (*cb)(void *data, uint32_t type, struct dma_sg_elem *next), + void *data) { struct dma_pdata *p = dma_get_drvdata(dma); uint32_t flags; @@ -723,7 +727,8 @@ static void dw_dma_set_cb(struct dma *dma, int channel, int type, spin_unlock_irq(&dma->lock, flags); } -static inline void dw_dma_chan_reload(struct dma *dma, int channel) +/* reload using LLI data */ +static inline void dw_dma_chan_reload_lli(struct dma *dma, int channel) { struct dma_pdata *p = dma_get_drvdata(dma); struct dw_lli2 *lli = p->chan[channel].lli_current; @@ -754,11 +759,39 @@ static inline void dw_dma_chan_reload(struct dma *dma, int channel) dw_write(dma, DW_DMA_CHAN_EN, CHAN_ENABLE(channel)); } +/* reload using callback data */ +static inline void dw_dma_chan_reload_next(struct dma *dma, int channel, + struct dma_sg_elem *next) +{ + struct dma_pdata *p = dma_get_drvdata(dma); + struct dw_lli2 *lli = p->chan[channel].lli_current; + + /* channel needs started from scratch, so write SARn, DARn */ + dw_write(dma, DW_SAR(channel), next->src); + dw_write(dma, DW_DAR(channel), next->dest); + + /* set transfer size of element */ + lli->ctrl_hi = DW_CTLH_CLASS(p->class) | + (next->size & DW_CTLH_BLOCK_TS_MASK); + + /* program CTLn */ + dw_write(dma, DW_CTRL_LOW(channel), lli->ctrl_lo); + dw_write(dma, DW_CTRL_HIGH(channel), lli->ctrl_hi); + + /* program CFGn */ + dw_write(dma, DW_CFG_LOW(channel), p->chan[channel].cfg_lo); + dw_write(dma, DW_CFG_HIGH(channel), p->chan[channel].cfg_hi); + + /* enable the channel */ + dw_write(dma, DW_DMA_CHAN_EN, CHAN_ENABLE(channel)); +} + /* this will probably be called at the end of every period copied */ static void dw_dma_irq_handler(void *data) { struct dma *dma = (struct dma *)data; struct dma_pdata *p = dma_get_drvdata(dma); + struct dma_sg_elem next; uint32_t status_tfr = 0, status_block = 0, status_err = 0, status_intr; uint32_t mask, pmask; int i; @@ -806,12 +839,16 @@ static void dw_dma_irq_handler(void *data) continue; } + next.size = 0; if (p->chan[i].cb) p->chan[i].cb(p->chan[i].cb_data, - DMA_IRQ_TYPE_LLIST); + DMA_IRQ_TYPE_LLIST, &next); /* check for reload channel */ - dw_dma_chan_reload(dma, i); + if (next.size > 0) + dw_dma_chan_reload_next(dma, i, &next); + else + dw_dma_chan_reload_lli(dma, i); } #if DW_USE_HW_LLI /* end of a LLI block */ diff --git a/src/include/reef/audio/component.h b/src/include/reef/audio/component.h index 61afa5a..850165b 100644 --- a/src/include/reef/audio/component.h +++ b/src/include/reef/audio/component.h @@ -161,7 +161,8 @@ struct comp_ops { int (*copy)(struct comp_dev *dev); /* host buffer config */ - int (*host_buffer)(struct comp_dev *dev, struct dma_sg_elem *elem); + int (*host_buffer)(struct comp_dev *dev, struct dma_sg_elem *elem, + uint32_t host_size); }; diff --git a/src/include/reef/dma.h b/src/include/reef/dma.h index b9e8a45..6de2ede 100644 --- a/src/include/reef/dma.h +++ b/src/include/reef/dma.h @@ -104,7 +104,8 @@ struct dma_ops { struct dma_sg_config *config); void (*set_cb)(struct dma *dma, int channel, int type, - void (*cb)(void *data, uint32_t type), void *data); + void (*cb)(void *data, uint32_t type, struct dma_sg_elem *next), + void *data); int (*pm_context_restore)(struct dma *dma); int (*pm_context_store)(struct dma *dma); @@ -162,7 +163,7 @@ static inline void dma_channel_put(struct dma *dma, int channel) } static inline void dma_set_cb(struct dma *dma, int channel, int type, - void (*cb)(void *data, uint32_t type), void *data) + void (*cb)(void *data, uint32_t type, struct dma_sg_elem *next), void *data) { dma->ops->set_cb(dma, channel, type, cb, data); } diff --git a/src/ipc/intel-ipc.c b/src/ipc/intel-ipc.c index 7aa24f3..d735f26 100644 --- a/src/ipc/intel-ipc.c +++ b/src/ipc/intel-ipc.c @@ -143,7 +143,7 @@ static uint32_t ipc_fw_caps(uint32_t header) return IPC_INTEL_GLB_REPLY_SUCCESS; } -static void dma_complete(void *data, uint32_t type) +static void dma_complete(void *data, uint32_t type, struct dma_sg_elem *next) { struct intel_ipc_data *iipc = (struct intel_ipc_data *)data; -- 2.9.3

1 7

[Sound-open-firmware] [PATCH 0/8] SSP: baytrail 24 bits support
by Keyon Jie 20 Dec '16

20 Dec '16

This series is created to change the SSP format setting for both Tx and Rx, and it is verified on MinnowMax + ALC5651 codec with I2S stereo both SSP_CLK_EXT and SSP_CLK_AUDIO mode. Changes including: 1. change ssp clock from 25M to 19.2M; 2. add 16bit <==> 24bit volume converting functions; 3. switch to use I2S mode(more common on host side); 4. change ssp stream format to 24 bits; 5. remove the usage of shim SSP divider and use SSCR0.SCR for BCLK generating. Keyon Jie (8): platform: ssp divider: read the ssp clock directly platform: switch default ssp clock to 19.2M volume: add 16bit<==>24bit volume copy function and mapping ssp: switch dai format form PCM B mode to normal I2S mode platform: add divider m/n setting for 50 bclk_fs dai: add stream_format to dai_data for codec stream ssp: change stream format to S24_4LE ssp: switch to use SCR for BCLK src/audio/dai.c | 9 +++++ src/audio/volume.c | 43 +++++++++++++++++++++++ src/drivers/ssp.c | 4 +-- src/ipc/intel-ipc.c | 19 +++------- src/platform/baytrail/include/platform/platform.h | 8 +++-- src/platform/baytrail/platform.c | 10 ++---- 6 files changed, 66 insertions(+), 27 deletions(-) -- 2.7.4

5 24

[Sound-open-firmware] [PATCH] dw-dma: fix dsp local memory mapping issue
by Keyon Jie 09 Dec '16

09 Dec '16

for DMA controller, we need mask dsp local memory before setting it to DMAC registers, otherwise, DMAC will locate to wrong memory address. Signed-off-by: Keyon Jie <yang.jie(a)linux.intel.com> --- src/drivers/dw-dma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/src/drivers/dw-dma.c b/src/drivers/dw-dma.c index 8834ca3..33c0d87 100644 --- a/src/drivers/dw-dma.c +++ b/src/drivers/dw-dma.c @@ -633,15 +633,15 @@ static int dw_dma_set_config(struct dma *dma, int channel, case DMA_DIR_MEM_TO_MEM: lli_desc->ctrl_lo |= DW_CTLL_FC_M2M; lli_desc->ctrl_lo |= DW_CTLL_SRC_INC | DW_CTLL_DST_INC; - lli_desc->sar = (uint32_t)sg_elem->src; - lli_desc->dar = (uint32_t)sg_elem->dest; + lli_desc->sar = (uint32_t)sg_elem->src | PLATFORM_HOST_DMA_MASK; + lli_desc->dar = (uint32_t)sg_elem->dest | PLATFORM_HOST_DMA_MASK; break; case DMA_DIR_MEM_TO_DEV: lli_desc->ctrl_lo |= DW_CTLL_FC_M2P; lli_desc->ctrl_lo |= DW_CTLL_SRC_INC | DW_CTLL_DST_FIX; p->chan[channel].cfg_hi |= DW_CFGH_DST_PER(config->dest_dev); - lli_desc->sar = (uint32_t)sg_elem->src; + lli_desc->sar = (uint32_t)sg_elem->src | PLATFORM_HOST_DMA_MASK; lli_desc->dar = (uint32_t)sg_elem->dest; break; case DMA_DIR_DEV_TO_MEM: @@ -650,7 +650,7 @@ static int dw_dma_set_config(struct dma *dma, int channel, p->chan[channel].cfg_hi |= DW_CFGH_SRC_PER(config->src_dev); lli_desc->sar = (uint32_t)sg_elem->src; - lli_desc->dar = (uint32_t)sg_elem->dest; + lli_desc->dar = (uint32_t)sg_elem->dest | PLATFORM_HOST_DMA_MASK; break; case DMA_DIR_DEV_TO_DEV: lli_desc->ctrl_lo |= DW_CTLL_FC_P2P; -- 2.5.0

2 1

[Sound-open-firmware] [PATCH] pipeline: clear buffer content to 0s on new
by Keyon Jie 09 Dec '16

09 Dec '16

We need clear/reset buffer content to 0s each time creating a pipeline buffer, to avoid random noise when using it. Signed-off-by: Keyon Jie <yang.jie(a)linux.intel.com> --- src/audio/pipeline.c | 1 + 1 file changed, 1 insertion(+) diff --git a/src/audio/pipeline.c b/src/audio/pipeline.c index f42fa15..50ae768 100644 --- a/src/audio/pipeline.c +++ b/src/audio/pipeline.c @@ -250,6 +250,7 @@ struct comp_buffer *pipeline_buffer_new(struct pipeline *p, trace_pipe_error("ebm"); return NULL; } + bzero(buffer->addr, desc->size); buffer->w_ptr = buffer->r_ptr = buffer->addr; buffer->end_addr = buffer->addr + desc->size; -- 2.7.4

2 1

[Sound-open-firmware] [PATCH] core: Add dsp-core option for XTENSA compiler
by Sebastien Guiriec 02 Nov '16

02 Nov '16

In order to use native XTENSA compiler the core target needs to be overwite with the good platform. This patch is adding an optional option in order to be able to overwrite the core selection. Example: - Set Xtensa export PATH=$PATH:<PATH>/xtensa/XtDevTools/install/tools/RD-2012.5-linux/XtensaTools ./configure --with-arch=xtensa --with-platform=baytrail --with-dsp-core=CHT_audio_hifiep --with-root-dir=<PATH>/xtensa/XtDevTools/install/tools/RD-2012.5-linux/XtensaTools --host=xtensa CC=xt-xcc OBJCOPY=xt-objcopy OBJDUMP=xt-objdump make make bin Signed-off-by: Sebastien Guiriec <sebastien.guiriec(a)intel.com> --- configure.ac | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/configure.ac b/configure.ac index 5a368b4..71e7795 100644 --- a/configure.ac +++ b/configure.ac @@ -113,6 +113,20 @@ case "$with_platform" in ;; esac +# DSP core support (Optional) +AC_ARG_WITH([dsp-core], + AS_HELP_STRING([--with-dsp-core], [Specify DSP Core]), + [], [with_dsp_core=no]) + +case "$with_dsp_core" in + CHT_audio_hifiep*) + # BXT/CHT DSP Core + XTENSA_CORE="CHT_audio_hifiep" + AC_SUBST(XTENSA_CORE) + ;; + +esac + # Test after CFLAGS set othewise test of cross compiler fails. AM_PROG_AS AM_PROG_AR @@ -157,6 +171,7 @@ echo " Target Architecture: ${ARCH} Target Platform: ${PLATFORM} +Target Core: ${XTENSA_CORE} Compiler: ${CC} CFLAGS: ${CFLAGS} -- 2.9.3 --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

2 1

[Sound-open-firmware] [PATCH] readme: Fix DSP compiler tool directy setting for platform build
by Sebastien Guiriec 01 Nov '16

01 Nov '16

In order to set the Root directory of the DSP compiler we should use --with-root-dir instead of --with-tool-dir Signed-off-by: Sebastien Guiriec <sebastien.guiriec(a)intel.com> --- README | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README b/README index 9212303..4a38efa 100644 --- a/README +++ b/README @@ -7,11 +7,11 @@ Build Instructions Baytrail :- -./configure --with-arch=xtensa --with-platform=baytrail --with-tool-dir=~/source/reef/xtensa-byt-elf --host=xtensa-byt-elf host_alias=xtensa-byt-elf +./configure --with-arch=xtensa --with-platform=baytrail --with-root-dir=~/source/reef/xtensa-byt-elf --host=xtensa-byt-elf host_alias=xtensa-byt-elf Cherrytrail :- -./configure --with-arch=xtensa --with-platform=cherrytrail --with-tool-dir=~/source/reef/xtensa-byt-elf --host=xtensa-byt-elf host_alias=xtensa-byt-elf +./configure --with-arch=xtensa --with-platform=cherrytrail --with-root-dir=~/source/reef/xtensa-byt-elf --host=xtensa-byt-elf host_alias=xtensa-byt-elf 3) make -- 2.9.3 --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

2 1

[Sound-open-firmware] [PATCH v2] platform: baytrail: use package string as the fw version
by Keyon Jie 27 Oct '16

27 Oct '16

On the linux driver side, it need get version infomation from fw, including: type -- Reef version -- major.minor build number last commit id -- gID So here we use the package string, which come from git version, which can provide all those fw version infos. Signed-off-by: Keyon Jie <yang.jie(a)linux.intel.com> --- src/platform/baytrail/platform.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/src/platform/baytrail/platform.c b/src/platform/baytrail/platform.c index 36d4993..ea3828f 100644 --- a/src/platform/baytrail/platform.c +++ b/src/platform/baytrail/platform.c @@ -57,11 +57,7 @@ static const struct sst_intel_ipc_fw_ready ready = { .outbox_size = MAILBOX_INBOX_SIZE, .fw_info_size = sizeof(struct fw_info), { - .info = { - .name = "REEF", - .date = __DATE__, - .time = __TIME__, - }, + .rsvd = PACKAGE_STRING, }, }; -- 2.7.4

2 1

[Sound-open-firmware] [PATCH] platform: baytrail: use package string as the fw version
by Keyon Jie 27 Oct '16

27 Oct '16

use the package string, which come from git version, as the fw version. Signed-off-by: Keyon Jie <yang.jie(a)linux.intel.com> --- src/platform/baytrail/platform.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/src/platform/baytrail/platform.c b/src/platform/baytrail/platform.c index 36d4993..ea3828f 100644 --- a/src/platform/baytrail/platform.c +++ b/src/platform/baytrail/platform.c @@ -57,11 +57,7 @@ static const struct sst_intel_ipc_fw_ready ready = { .outbox_size = MAILBOX_INBOX_SIZE, .fw_info_size = sizeof(struct fw_info), { - .info = { - .name = "REEF", - .date = __DATE__, - .time = __TIME__, - }, + .rsvd = PACKAGE_STRING, }, }; -- 2.7.4

2 3