May 2023 - Sound-open-firmware - mailman.alsa-project.org

Re: [PATCH 1/2] ASoC: SOF: mediatek: add mt8188 audio support
by Pierre-Louis Bossart 31 May '23

31 May '23

On 5/15/23 10:05, Mark Brown wrote: > On Mon, May 15, 2023 at 01:25:44PM +0200, AngeloGioacchino Del Regno wrote: >> Il 15/05/23 07:25, Trevor Wu ha scritto: > >>> +{ >>> + /* common defaults */ >>> + memcpy(&sof_mt8188_ops, &sof_mt8186_ops, sizeof(struct snd_sof_dsp_ops)); > >> Never use sizeof(type), always use destination var size! Anyway, there's more. >> >> I don't think we need to perform this memcpy: we'll never see an instance of >> both mt8186 and mt8188 drivers on the same machine, so you can safely just use >> sof_mt8186_ops for mt8188... > >>> + sof_mt8188_ops.drv = mt8188_dai; > >> ...which obviously means that this becomes > >> sof_mt8186_ops.drv = mt8188_dai; > > This does have the issue that it then means the ops struct isn't const > which isn't ideal. It's also not the end of the world though so I don't > have super strong feelings. We do the same for Intel devices, we have a common structure which is copied and only the members that differ in specific SOCs are updated. You're right that it's not constant, but it avoids copy-paste of a rather large structure just to change a couple of lines.

2 2

[PATCH v2 0/2] ASoC: SOF: add mt8188 audio support
by Trevor Wu 30 May '23

30 May '23

This series adds mt8188 audio support and dbg_dump callback for mt8186 and mt8188. Changes since v1: - fix typo - adopt reviewer's suggestion Trevor Wu (2): ASoC: SOF: mediatek: add mt8188 audio support ASoC: SOF: mediatek: add adsp debug dump sound/soc/sof/mediatek/mt8186/mt8186.c | 83 +++++++++++++++++++++++++- 1 file changed, 82 insertions(+), 1 deletion(-) -- 2.18.0

2 3

[PATCH] sound: Fix incorrect calculation of object size by sizeof
by Lu Hongfei 30 May '23

30 May '23

What we need to calculate is the size of the object, not the size of the pointer. This patch can fix this error. Signed-off-by: Lu Hongfei <luhongfei(a)vivo.com> --- sound/soc/sof/ipc4-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) mode change 100644 => 100755 sound/soc/sof/ipc4-topology.c diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 5abe616a2054..29b6dede53b0 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -220,7 +220,7 @@ static int sof_ipc4_get_audio_fmt(struct snd_soc_component *scomp, ret = sof_update_ipc_object(scomp, available_fmt, SOF_AUDIO_FMT_NUM_TOKENS, swidget->tuples, - swidget->num_tuples, sizeof(available_fmt), 1); + swidget->num_tuples, sizeof(*available_fmt), 1); if (ret) { dev_err(scomp->dev, "Failed to parse audio format token count\n"); return ret; -- 2.39.0

1 0

[PATCH AUTOSEL 6.1 29/57] ASoC: SOF: pm: save io region state in case of errors in resume
by Sasha Levin 25 May '23

25 May '23

From: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> [ Upstream commit 171b53be635ac15d4feafeb33946035649b1ca14 ] If there are failures in DSP runtime resume, the device state will not reach active and this makes it impossible e.g. to retrieve a possible DSP panic dump via "exception" debugfs node. If CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in cache is stale. If debugfs cache is not used, the region simply cannot be read. To allow debugging these scenarios, update the debugfs cache contents in resume error handler. User-space can then later retrieve DSP panic and other state via debugfs (requires SOF debugfs cache to be enabled in build). Reported-by: Curtis Malainey <cujomalainey(a)chromium.org Link: https://github.com/thesofproject/linux/issues/4274 Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com Reviewed-by: Curtis Malainey <cujomalainey(a)chromium.org Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel… Signed-off-by: Mark Brown <broonie(a)kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/pm.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c index 26ffcbb6e30f4..a1bfa5a37e2ad 100644 --- a/sound/soc/sof/pm.c +++ b/sound/soc/sof/pm.c @@ -159,7 +159,7 @@ static int sof_resume(struct device *dev, bool runtime_resume) ret = tplg_ops->set_up_all_pipelines(sdev, false); if (ret < 0) { dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret); - return ret; + goto setup_fail; } } @@ -173,6 +173,18 @@ static int sof_resume(struct device *dev, bool runtime_resume) dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret); } +setup_fail: +#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) + if (ret < 0) { + /* + * Debugfs cannot be read in runtime suspend, so cache + * the contents upon failure. This allows to capture + * possible DSP coredump information. + */ + sof_cache_debugfs(sdev); + } +#endif + return ret; } -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 28/57] ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling
by Sasha Levin 25 May '23

25 May '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit bc424273c74c1565c459c8f2a6ed95caee368d0a ] When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta(a)nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-4-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/sof-client-probes.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/sof/sof-client-probes.c b/sound/soc/sof/sof-client-probes.c index ddeabbb5580e1..1e521a9e34d27 100644 --- a/sound/soc/sof/sof-client-probes.c +++ b/sound/soc/sof/sof-client-probes.c @@ -441,12 +441,7 @@ static ssize_t sof_probes_dfs_points_read(struct file *file, char __user *to, ret = sof_probes_points_info(cdev, &desc, &num_desc); if (ret < 0) - goto exit; - - pm_runtime_mark_last_busy(dev); - err = pm_runtime_put_autosuspend(dev); - if (err < 0) - dev_err_ratelimited(dev, "debugfs read failed to idle %d\n", err); + goto pm_error; for (i = 0; i < num_desc; i++) { offset = strlen(buf); @@ -464,6 +459,13 @@ static ssize_t sof_probes_dfs_points_read(struct file *file, char __user *to, ret = simple_read_from_buffer(to, count, ppos, buf, strlen(buf)); kfree(desc); + +pm_error: + pm_runtime_mark_last_busy(dev); + err = pm_runtime_put_autosuspend(dev); + if (err < 0) + dev_err_ratelimited(dev, "debugfs read failed to idle %d\n", err); + exit: kfree(buf); return ret; -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 27/57] ASoC: SOF: pcm: fix pm_runtime imbalance in error handling
by Sasha Levin 25 May '23

25 May '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit da0fe8fd515a471d373acc3682bfb5522cca4d55 ] When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta(a)nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-3-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/pcm.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/pcm.c b/sound/soc/sof/pcm.c index 14571b821ecac..be6f38af37b5d 100644 --- a/sound/soc/sof/pcm.c +++ b/sound/soc/sof/pcm.c @@ -619,16 +619,17 @@ static int sof_pcm_probe(struct snd_soc_component *component) "%s/%s", plat_data->tplg_filename_prefix, plat_data->tplg_filename); - if (!tplg_filename) - return -ENOMEM; + if (!tplg_filename) { + ret = -ENOMEM; + goto pm_error; + } ret = snd_sof_load_topology(component, tplg_filename); - if (ret < 0) { + if (ret < 0) dev_err(component->dev, "error: failed to load DSP topology %d\n", ret); - return ret; - } +pm_error: pm_runtime_mark_last_busy(component->dev); pm_runtime_put_autosuspend(component->dev); -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 26/57] ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions
by Sasha Levin 25 May '23

25 May '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 3de975862f985f1c9e225a0d13aa3d501373f7c3 ] When a firmware IPC error happens during a pm_runtime suspend, we ignore the error and suspend anyways. However, the code unconditionally increases the runtime_pm counter. This results in a confusing configuration where the code will suspend, resume but never suspend again due to the use of pm_runtime_get_noresume(). The intent of the counter increase was to prevent entry in D3, but if that transition to D3 is already started it cannot be stopped. In addition, there's no point in that case in trying to prevent anything, the firmware error is handled and the next resume will re-initialize the firmware completely. This patch changes the logic to prevent suspend when the device is pm_runtime active and has a use_count > 0. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta(a)nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-2-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/debug.c b/sound/soc/sof/debug.c index ade0507328af4..5042312b1b98d 100644 --- a/sound/soc/sof/debug.c +++ b/sound/soc/sof/debug.c @@ -437,8 +437,8 @@ void snd_sof_handle_fw_exception(struct snd_sof_dev *sdev, const char *msg) /* should we prevent DSP entering D3 ? */ if (!sdev->ipc_dump_printed) dev_info(sdev->dev, - "preventing DSP entering D3 state to preserve context\n"); - pm_runtime_get_noresume(sdev->dev); + "Attempting to prevent DSP from entering D3 state to preserve context\n"); + pm_runtime_get_if_in_use(sdev->dev); } /* dump vital information to the logs */ -- 2.39.2

1 0

[PATCH AUTOSEL 6.3 34/67] ASoC: SOF: pm: save io region state in case of errors in resume
by Sasha Levin 25 May '23

25 May '23

From: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> [ Upstream commit 171b53be635ac15d4feafeb33946035649b1ca14 ] If there are failures in DSP runtime resume, the device state will not reach active and this makes it impossible e.g. to retrieve a possible DSP panic dump via "exception" debugfs node. If CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in cache is stale. If debugfs cache is not used, the region simply cannot be read. To allow debugging these scenarios, update the debugfs cache contents in resume error handler. User-space can then later retrieve DSP panic and other state via debugfs (requires SOF debugfs cache to be enabled in build). Reported-by: Curtis Malainey <cujomalainey(a)chromium.org Link: https://github.com/thesofproject/linux/issues/4274 Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com Reviewed-by: Curtis Malainey <cujomalainey(a)chromium.org Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel… Signed-off-by: Mark Brown <broonie(a)kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/pm.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c index 85412aeb1ca16..40f392efd8246 100644 --- a/sound/soc/sof/pm.c +++ b/sound/soc/sof/pm.c @@ -159,7 +159,7 @@ static int sof_resume(struct device *dev, bool runtime_resume) ret = tplg_ops->set_up_all_pipelines(sdev, false); if (ret < 0) { dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret); - return ret; + goto setup_fail; } } @@ -173,6 +173,18 @@ static int sof_resume(struct device *dev, bool runtime_resume) dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret); } +setup_fail: +#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) + if (ret < 0) { + /* + * Debugfs cannot be read in runtime suspend, so cache + * the contents upon failure. This allows to capture + * possible DSP coredump information. + */ + sof_cache_debugfs(sdev); + } +#endif + return ret; } -- 2.39.2

1 0

[PATCH AUTOSEL 6.3 33/67] ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling
by Sasha Levin 25 May '23

25 May '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit bc424273c74c1565c459c8f2a6ed95caee368d0a ] When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta(a)nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-4-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/sof-client-probes.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/sof/sof-client-probes.c b/sound/soc/sof/sof-client-probes.c index fff126808bc04..8d9e9d5f40e45 100644 --- a/sound/soc/sof/sof-client-probes.c +++ b/sound/soc/sof/sof-client-probes.c @@ -218,12 +218,7 @@ static ssize_t sof_probes_dfs_points_read(struct file *file, char __user *to, ret = ipc->points_info(cdev, &desc, &num_desc); if (ret < 0) - goto exit; - - pm_runtime_mark_last_busy(dev); - err = pm_runtime_put_autosuspend(dev); - if (err < 0) - dev_err_ratelimited(dev, "debugfs read failed to idle %d\n", err); + goto pm_error; for (i = 0; i < num_desc; i++) { offset = strlen(buf); @@ -241,6 +236,13 @@ static ssize_t sof_probes_dfs_points_read(struct file *file, char __user *to, ret = simple_read_from_buffer(to, count, ppos, buf, strlen(buf)); kfree(desc); + +pm_error: + pm_runtime_mark_last_busy(dev); + err = pm_runtime_put_autosuspend(dev); + if (err < 0) + dev_err_ratelimited(dev, "debugfs read failed to idle %d\n", err); + exit: kfree(buf); return ret; -- 2.39.2

1 0

[PATCH AUTOSEL 6.3 32/67] ASoC: SOF: pcm: fix pm_runtime imbalance in error handling
by Sasha Levin 25 May '23

25 May '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit da0fe8fd515a471d373acc3682bfb5522cca4d55 ] When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta(a)nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-3-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/pcm.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/pcm.c b/sound/soc/sof/pcm.c index 445acb5c3a21b..2570f33db9f3e 100644 --- a/sound/soc/sof/pcm.c +++ b/sound/soc/sof/pcm.c @@ -616,16 +616,17 @@ static int sof_pcm_probe(struct snd_soc_component *component) "%s/%s", plat_data->tplg_filename_prefix, plat_data->tplg_filename); - if (!tplg_filename) - return -ENOMEM; + if (!tplg_filename) { + ret = -ENOMEM; + goto pm_error; + } ret = snd_sof_load_topology(component, tplg_filename); - if (ret < 0) { + if (ret < 0) dev_err(component->dev, "error: failed to load DSP topology %d\n", ret); - return ret; - } +pm_error: pm_runtime_mark_last_busy(component->dev); pm_runtime_put_autosuspend(component->dev); -- 2.39.2

1 0