June 2018 - Sound-open-firmware - mailman.alsa-project.org

[Sound-open-firmware] [PATCH v2 1/2] topology: enable ssp2 for capture feature.
by Wu Zhigang 11 Jun '18

11 Jun '18

the ssp2 should be tdm8-32bit. Signed-off-by: Wu Zhigang <zhigang.wu(a)linux.intel.com> --- v2: the dma channel number in tplg is ignored now. --- SOFTool master: b3221684388e57f8031af6186172ea83b4f1edd2 Pass the sanity test already. --- topology/sof-apl-tdf8532.m4 | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/topology/sof-apl-tdf8532.m4 b/topology/sof-apl-tdf8532.m4 index 5554e58..776f8d5 100644 --- a/topology/sof-apl-tdf8532.m4 +++ b/topology/sof-apl-tdf8532.m4 @@ -38,19 +38,19 @@ PIPELINE_PCM_DAI_ADD(sof/pipe-volume-playback.m4, 1, 0, 4, s32le, 48, 1000, 0, 0, 0, 1, SSP, 4, s32le, 2) -# Low Latency playback pipeline 2 on PCM 1 using max 2 channels of s16le. +# Low Latency playback pipeline 2 on PCM 1 using max 8 channels of s32le. # Schedule 48 frames per 1000us deadline on core 0 with priority 0 # Use DMAC 0 channel 1 for PCM audio playback data PIPELINE_PCM_DAI_ADD(sof/pipe-volume-playback.m4, - 2, 1, 2, s16le, - 48, 1000, 0, 0, 0, 1, SSP, 2, s16le, 2) + 2, 1, 8, s32le, + 48, 1000, 0, 0, 0, 1, SSP, 2, s32le, 2) -# Low Latency capture pipeline 3 on PCM 1 using max 2 channels of s16le. +# Low Latency capture pipeline 3 on PCM 1 using max 8 channels of s32le. # Schedule 48 frames per 1000us deadline on core 0 with priority 0 # Use DMAC 0 channel 1 for PCM audio playback data PIPELINE_PCM_DAI_ADD(sof/pipe-volume-capture.m4, - 3, 1, 2, s16le, - 48, 1000, 0, 0, 0, 1, SSP, 2, s16le, 2) + 3, 1, 8, s32le, + 48, 1000, 0, 0, 0, 1, SSP, 2, s32le, 2) # Low Latency playback pipeline 4 on PCM 2 using max 2 channels of s16le. # Schedule 48 frames per 1000us deadline on core 0 with priority 0 @@ -114,17 +114,17 @@ DAI_ADD(sof/pipe-dai-playback.m4, 48, 1000, 0, 0) # playback DAI is SSP2 using 2 periods -# Buffers use s16le format, with 48 frame per 1000us on core 0 with priority 0 +# Buffers use s32le format, with 48 frame per 1000us on core 0 with priority 0 DAI_ADD(sof/pipe-dai-playback.m4, 2, SSP, 2, SSP2-Codec, - PIPELINE_SOURCE_2, 2, s16le, + PIPELINE_SOURCE_2, 2, s32le, 48, 1000, 0, 0) # capture DAI is SSP2 using 2 periods -# Buffers use s16le format, with 48 frame per 1000us on core 0 with priority 0 +# Buffers use s32le format, with 48 frame per 1000us on core 0 with priority 0 DAI_ADD(sof/pipe-dai-capture.m4, 3, SSP, 2, SSP2-Codec, - PIPELINE_SINK_3, 2, s16le, + PIPELINE_SINK_3, 2, s32le, 48, 1000, 0, 0) # playback DAI is SSP0 using 2 periods @@ -196,11 +196,11 @@ DAI_CONFIG(SSP, 4, 4, SSP4-Codec, SSP_SAMPLE_BITS(SSP, 4, 32))) DAI_CONFIG(SSP, 2, 2, SSP2-Codec, - SSP_CONFIG(I2S, DAI_CLOCK(mclk, 24576000, codec_mclk_in), - DAI_CLOCK(bclk, 1536000, codec_slave), + SSP_CONFIG(DSP_B, DAI_CLOCK(mclk, 24576000, codec_mclk_in), + DAI_CLOCK(bclk, 12288000, codec_slave), DAI_CLOCK(fsync, 48000, codec_slave), - DAI_TDM(2, 16, 3, 3), - SSP_SAMPLE_BITS(SSP, 2, 16))) + DAI_TDM(2, 32, 255, 255), + SSP_SAMPLE_BITS(SSP, 2, 32))) DAI_CONFIG(SSP, 0, 0, SSP0-Codec, SSP_CONFIG(I2S, DAI_CLOCK(mclk, 24576000, codec_mclk_in), -- 2.17.1

2 2

[Sound-open-firmware] [RFC PATCH v2] tone: add command handler to return tone state and compute tone sample rate
by Ranjani Sridharan 11 Jun '18

11 Jun '18

This patch adds the get() handler to respond to requests for the current tone state. It also modifies the set() handler to return the previous state in the ipc reply. This will help the driver in determining if the tone pipeline needs to be triggered or not. Lastly, it modifies the tone sample rate to be computed from the pipeline deadline and frames per sched. Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> --- src/audio/tone.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/src/audio/tone.c b/src/audio/tone.c index eee6091..839a0f6 100644 --- a/src/audio/tone.c +++ b/src/audio/tone.c @@ -462,6 +462,25 @@ static int tone_params(struct comp_dev *dev) return 0; } +static int tone_cmd_get_value(struct comp_dev *dev, + struct sof_ipc_ctrl_data *cdata) +{ + struct comp_data *cd = comp_get_drvdata(dev); + int j; + + trace_tone("mgt"); + + if (cdata->cmd == SOF_CTRL_CMD_SWITCH) { + for (j = 0; j < cdata->num_elems; j++) { + cdata->chanv[j].channel = j; + cdata->chanv[j].value = !cd->sg[j].mute; + trace_value(j); + trace_value(cd->sg[j].mute); + } + } + return 0; +} + static int tone_cmd_set_value(struct comp_dev *dev, struct sof_ipc_ctrl_data *cdata) { struct comp_data *cd = comp_get_drvdata(dev); @@ -480,6 +499,10 @@ static int tone_cmd_set_value(struct comp_dev *dev, struct sof_ipc_ctrl_data *cd trace_tone_error("che"); return -EINVAL; } + + /* send current state back to the driver */ + cdata->chanv[j].value = !cd->sg[ch].mute; + if (val) tonegen_unmute(&cd->sg[ch]); else @@ -583,6 +606,9 @@ static int tone_cmd(struct comp_dev *dev, int cmd, void *data) case COMP_CMD_SET_VALUE: ret = tone_cmd_set_value(dev, cdata); break; + case COMP_CMD_GET_VALUE: + ret = tone_cmd_get_value(dev, cdata); + break; } return ret; @@ -641,7 +667,7 @@ static int tone_prepare(struct comp_dev * dev) return ret; cd->channels = dev->params.channels; - cd->rate = dev->params.rate; + cd->rate = dev->frames * dev->pipeline->ipc_pipe.deadline; tracev_value(cd->channels); tracev_value(cd->rate); -- 2.17.1

2 3

[Sound-open-firmware] [PATCH v3 0/6] Introducing new dma_get() API
by Ranjani Sridharan 11 Jun '18

11 Jun '18

This set of patches proposes a new API for dma_get() that procures a DMAC based on the requested copy capability and flags indicating shared/exclusive access. It also updates the existing user of dma_get() to use the new API based on the specific usage. The API uses the number of channels draning in each DMAC to balance the load between the platform DMAC's for users requesting shared access privilege. This provides a primitive level of QoS and prevents overloading any DMAC. The platform DMAC definitions have also been updated to include information about copy capabilities supported and the type of DMA. Test Results: 1. Minnowboard Turbot w 5651: Sanity test Score 10/11. Failed Simultaneous playback & capture feature test. This issue is unrelated to this patch. 2. Up Squared Board w Hifiberry DAC+: Sanity Test Score: 6/11 Failed Capture feature tests as the hifiberry doesnt support capture but passed all other feature tests. Kernel: https://github.com/thesofproject/linux branch: topic/dev SOF Repo: https://github.com/thesofproject/linux/sof branch:master SOFT: https://github.com/thesofproject/linux/sof branch: master v2 changes: 1. dma_get() consolidated for all platforms 2. dmac definitions include copy capability 3. Added some helper api's to retreive platform DMAC info v3 changes: 1. Not RFC anymore. First set of real patches with new API. 2. Added type of DMA to platform DMAC definitions 3. Updated atomic arithmetic calls Ranjani Sridharan (6): platform: dma: move dmac initialization dma: update platform DMAC definitions with capabilities dma: introduce parameter to store the number of channels draining dma: Introduce new API for dma_get() dma: update dma users with the new API dma: trace: dma_copy_new() does not need DMAC ID anymore src/arch/xtensa/Makefile.am | 1 + src/audio/dai.c | 5 +- src/audio/host.c | 18 +++-- src/drivers/dw-dma.c | 11 +++ src/drivers/hda-dma.c | 8 ++ src/host/common_test.c | 2 +- src/include/sof/dma.h | 29 ++++++- src/ipc/apl-ipc.c | 6 +- src/ipc/byt-ipc.c | 7 +- src/ipc/cnl-ipc.c | 6 +- src/ipc/dma-copy.c | 7 +- src/ipc/hsw-ipc.c | 7 +- src/lib/Makefile.am | 11 +++ src/lib/dma-trace.c | 2 +- src/lib/dma.c | 80 +++++++++++++++++++ src/platform/apollolake/dma.c | 28 +++++-- .../apollolake/include/platform/dma.h | 5 ++ .../apollolake/include/platform/platform.h | 3 - src/platform/apollolake/platform.c | 22 +---- src/platform/baytrail/dma.c | 33 ++++++-- src/platform/baytrail/include/platform/dma.h | 9 +++ .../baytrail/include/platform/platform.h | 3 - src/platform/baytrail/platform.c | 23 +----- src/platform/cannonlake/dma.c | 28 +++++-- .../cannonlake/include/platform/dma.h | 6 ++ .../cannonlake/include/platform/platform.h | 3 - src/platform/cannonlake/platform.c | 23 +----- src/platform/haswell/dma.c | 38 ++++++--- src/platform/haswell/include/platform/dma.h | 5 ++ .../haswell/include/platform/platform.h | 3 - src/platform/haswell/platform.c | 21 +---- 31 files changed, 312 insertions(+), 141 deletions(-) create mode 100644 src/lib/dma.c -- 2.17.1

2 11

[Sound-open-firmware] [PATCH v2] ipc: skip host page table set up for hostless tone pipeline
by Ranjani Sridharan 10 Jun '18

10 Jun '18

Hostless pipelines such as the tone pipeline do not need host page table while setting up pcm params. Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> --- src/ipc/handler.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/src/ipc/handler.c b/src/ipc/handler.c index 581ce9e..92aa846 100644 --- a/src/ipc/handler.c +++ b/src/ipc/handler.c @@ -125,8 +125,11 @@ static int ipc_stream_pcm_params(uint32_t stream) cd = pcm_dev->cd; cd->params = pcm_params->params; -#ifdef CONFIG_HOST_PTABLE + /* no need to set up host page table for hostless pipelines */ + if (cd->comp.type == SOF_COMP_TONE) + goto pipe_params; +#ifdef CONFIG_HOST_PTABLE list_init(&elem_list); /* use DMA to read in compressed page table ringbuffer from host */ @@ -163,6 +166,8 @@ static int ipc_stream_pcm_params(uint32_t stream) } #endif +pipe_params: + /* configure pipeline audio params */ err = pipeline_params(pcm_dev->cd->pipeline, pcm_dev->cd, pcm_params); if (err < 0) { -- 2.17.1

2 1

[Sound-open-firmware] [PATCH V2 1/3] configure: Change install prefix for bin and keys
by Xiuli Pan 10 Jun '18

10 Jun '18

From: Pan Xiuli <xiuli.pan(a)linux.intel.com> Install prefix will not influce PEM install path. Add the check to let PEM can install with the prefix. Signed-off-by: Pan Xiuli <xiuli.pan(a)linux.intel.com> --- configure.ac | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/configure.ac b/configure.ac index 0f34acc..a948906 100644 --- a/configure.ac +++ b/configure.ac @@ -358,7 +358,11 @@ if test "$have_rimage" = "yes"; then fi fi +if test "x$prefix" == "xNONE"; then PEM_KEY_PREFIX="/usr/local/share/rimage" +else +PEM_KEY_PREFIX=$prefix"/share/rimage" +fi AC_DEFINE_UNQUOTED([PEM_KEY_PREFIX], ["$PEM_KEY_PREFIX"], ["Path for PEM keys"]) AC_SUBST(PEM_KEY_PREFIX) @@ -448,6 +452,7 @@ echo " Target Architecture: ${ARCH} Target Platform: ${PLATFORM} Target Core: ${XTENSA_CORE} +Install Prefix: ${prefix} PEM: ${PEM_KEY_PREFIX} Compiler: ${CC} -- 2.7.4

1 2

[Sound-open-firmware] [PATCH 1/3] configure: Change install prefix for bin and keys
by Xiuli Pan 10 Jun '18

10 Jun '18

From: Pan Xiuli <xiuli.pan(a)linux.intel.com> Install prefix will not influce PEM install path. Add the check to let PEM can install with the prefix. Signed-off-by: Pan Xiuli <xiuli.pan(a)linux.intel.com> --- configure.ac | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/configure.ac b/configure.ac index 0f34acc..a948906 100644 --- a/configure.ac +++ b/configure.ac @@ -358,7 +358,11 @@ if test "$have_rimage" = "yes"; then fi fi +if test "x$prefix" == "xNONE"; then PEM_KEY_PREFIX="/usr/local/share/rimage" +else +PEM_KEY_PREFIX=$prefix"/share/rimage" +fi AC_DEFINE_UNQUOTED([PEM_KEY_PREFIX], ["$PEM_KEY_PREFIX"], ["Path for PEM keys"]) AC_SUBST(PEM_KEY_PREFIX) @@ -448,6 +452,7 @@ echo " Target Architecture: ${ARCH} Target Platform: ${PLATFORM} Target Core: ${XTENSA_CORE} +Install Prefix: ${prefix} PEM: ${PEM_KEY_PREFIX} Compiler: ${CC} -- 2.7.4

3 3

[Sound-open-firmware] [PATCH v2] apl: core: enable boot loader path for Apollolake
by Liam Girdwood 08 Jun '18

08 Jun '18

From: Tomasz Lauda <tomasz.lauda(a)linux.intel.com> This patch: - Enables APL boot via SRAM, - Disables L2 cache for APL, - Reshapes linker scripts for APL and CNL. - Adds support for using external xtensa headers for xt-xcc. Signed-off-by: Tomasz Lauda <tomasz.lauda(a)linux.intel.com> --- Makefile.am | 15 +- configure.ac | 29 +- src/arch/xtensa/Makefile.am | 15 +- src/arch/xtensa/boot_entry.S | 49 +- src/arch/xtensa/boot_loader.c | 16 +- src/arch/xtensa/crt1-boards.S | 616 +++++++++--------- src/arch/xtensa/reset-vector.S | 8 +- src/arch/xtensa/xtos/crt1-boards.S | 9 +- src/arch/xtensa/xtos/crt1-sim.S | 5 +- src/arch/xtensa/xtos/crt1-tiny.S | 6 +- src/include/sof/trace.h | 3 + src/platform/apollolake/Makefile.am | 14 +- src/platform/apollolake/apollolake.x.in | 133 ++-- src/platform/apollolake/boot_ldr.x.in | 236 +++++++ src/platform/apollolake/boot_module.c | 54 ++ src/platform/apollolake/include/Makefile.am | 2 +- .../apollolake/include/arch/Makefile.am | 1 + .../include/{ => arch}/xtensa/Makefile.am | 0 .../{ => arch}/xtensa/config/Makefile.am | 0 .../{ => arch}/xtensa/config/core-isa.h | 60 +- .../include/arch}/xtensa/config/core-matmap.h | 7 + .../include/arch}/xtensa/config/defs.h | 8 + .../include/arch}/xtensa/config/specreg.h | 8 + .../include/{ => arch}/xtensa/config/system.h | 7 + .../{ => arch}/xtensa/config/tie-asm.h | 8 + .../include/arch}/xtensa/config/tie.h | 8 + .../apollolake/include/platform/memory.h | 116 ++-- .../apollolake/include/platform/platcfg.h | 38 ++ .../apollolake/include/platform/platform.h | 1 + .../apollolake/include/platform/shim.h | 22 +- src/platform/baytrail/include/Makefile.am | 2 +- .../baytrail/include/arch/Makefile.am | 1 + .../include/{ => arch}/xtensa/Makefile.am | 0 .../{ => arch}/xtensa/config/Makefile.am | 0 .../{ => arch}/xtensa/config/core-isa-byt.h | 0 .../{ => arch}/xtensa/config/core-isa-cht.h | 0 .../{ => arch}/xtensa/config/core-isa.h | 0 .../{ => arch}/xtensa/config/core-matmap.h | 0 .../include/arch}/xtensa/config/defs.h | 0 .../{ => arch}/xtensa/config/specreg.h | 0 .../include/{ => arch}/xtensa/config/system.h | 0 .../{ => arch}/xtensa/config/tie-asm.h | 0 .../include/{ => arch}/xtensa/config/tie.h | 0 src/platform/cannonlake/boot_ldr.x.in | 224 +------ src/platform/cannonlake/cannonlake.x.in | 81 +-- src/platform/cannonlake/include/Makefile.am | 2 +- .../cannonlake/include/arch/Makefile.am | 1 + .../include/{ => arch}/xtensa/Makefile.am | 0 .../{ => arch}/xtensa/config/Makefile.am | 1 - .../xtensa/config/core-isa.h} | 58 +- .../include/arch}/xtensa/config/core-matmap.h | 7 + .../include/arch}/xtensa/config/defs.h | 8 + .../include/arch}/xtensa/config/specreg.h | 8 + .../include/{ => arch}/xtensa/config/system.h | 7 + .../{ => arch}/xtensa/config/tie-asm.h | 8 + .../include/arch}/xtensa/config/tie.h | 8 + .../cannonlake/include/platform/memory.h | 32 +- .../cannonlake/include/platform/platcfg.h | 36 + .../cannonlake/include/platform/platform.h | 1 + .../cannonlake/include/platform/shim.h | 6 +- .../include/xtensa/config/core-isa.h | 557 ---------------- src/platform/haswell/include/Makefile.am | 2 +- src/platform/haswell/include/arch/Makefile.am | 1 + .../include/{ => arch}/xtensa/Makefile.am | 0 .../{ => arch}/xtensa/config/Makefile.am | 0 .../{ => arch}/xtensa/config/core-isa-bdw.h | 0 .../{ => arch}/xtensa/config/core-isa-hsw.h | 0 .../{ => arch}/xtensa/config/core-isa.h | 0 .../{ => arch}/xtensa/config/core-matmap.h | 0 .../include/arch}/xtensa/config/defs.h | 0 .../{ => arch}/xtensa/config/specreg.h | 0 .../include/{ => arch}/xtensa/config/system.h | 0 .../{ => arch}/xtensa/config/tie-asm.h | 0 .../include/{ => arch}/xtensa/config/tie.h | 0 74 files changed, 1191 insertions(+), 1354 deletions(-) create mode 100644 src/platform/apollolake/boot_ldr.x.in create mode 100644 src/platform/apollolake/boot_module.c create mode 100644 src/platform/apollolake/include/arch/Makefile.am rename src/platform/apollolake/include/{ => arch}/xtensa/Makefile.am (100%) rename src/platform/apollolake/include/{ => arch}/xtensa/config/Makefile.am (100%) rename src/platform/apollolake/include/{ => arch}/xtensa/config/core-isa.h (95%) rename src/platform/{cannonlake/include => apollolake/include/arch}/xtensa/config/core-matmap.h (99%) rename src/platform/{cannonlake/include => apollolake/include/arch}/xtensa/config/defs.h (94%) rename src/platform/{cannonlake/include => apollolake/include/arch}/xtensa/config/specreg.h (96%) rename src/platform/apollolake/include/{ => arch}/xtensa/config/system.h (99%) rename src/platform/apollolake/include/{ => arch}/xtensa/config/tie-asm.h (99%) rename src/platform/{cannonlake/include => apollolake/include/arch}/xtensa/config/tie.h (98%) create mode 100644 src/platform/apollolake/include/platform/platcfg.h create mode 100644 src/platform/baytrail/include/arch/Makefile.am rename src/platform/baytrail/include/{ => arch}/xtensa/Makefile.am (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/Makefile.am (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/core-isa-byt.h (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/core-isa-cht.h (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/core-isa.h (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/core-matmap.h (100%) rename src/platform/{apollolake/include => baytrail/include/arch}/xtensa/config/defs.h (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/specreg.h (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/system.h (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/tie-asm.h (100%) rename src/platform/baytrail/include/{ => arch}/xtensa/config/tie.h (100%) create mode 100644 src/platform/cannonlake/include/arch/Makefile.am rename src/platform/cannonlake/include/{ => arch}/xtensa/Makefile.am (100%) rename src/platform/cannonlake/include/{ => arch}/xtensa/config/Makefile.am (84%) rename src/platform/cannonlake/include/{xtensa/config/core-isa-boot.h => arch/xtensa/config/core-isa.h} (95%) rename src/platform/{apollolake/include => cannonlake/include/arch}/xtensa/config/core-matmap.h (99%) rename src/platform/{haswell/include => cannonlake/include/arch}/xtensa/config/defs.h (94%) rename src/platform/{apollolake/include => cannonlake/include/arch}/xtensa/config/specreg.h (96%) rename src/platform/cannonlake/include/{ => arch}/xtensa/config/system.h (99%) rename src/platform/cannonlake/include/{ => arch}/xtensa/config/tie-asm.h (99%) rename src/platform/{apollolake/include => cannonlake/include/arch}/xtensa/config/tie.h (98%) create mode 100644 src/platform/cannonlake/include/platform/platcfg.h delete mode 100644 src/platform/cannonlake/include/xtensa/config/core-isa.h create mode 100644 src/platform/haswell/include/arch/Makefile.am rename src/platform/haswell/include/{ => arch}/xtensa/Makefile.am (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/Makefile.am (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/core-isa-bdw.h (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/core-isa-hsw.h (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/core-isa.h (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/core-matmap.h (100%) rename src/platform/{baytrail/include => haswell/include/arch}/xtensa/config/defs.h (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/specreg.h (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/system.h (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/tie-asm.h (100%) rename src/platform/haswell/include/{ => arch}/xtensa/config/tie.h (100%) diff --git a/Makefile.am b/Makefile.am index eeacb0b..d2c4956 100644 --- a/Makefile.am +++ b/Makefile.am @@ -30,8 +30,19 @@ export SOF_INCDIR = \ export ARCH_INCDIR = \ -I $(SRC_DIR)/arch/$(ARCH)/include \ -I $(SRC_DIR)/arch/$(ARCH)/xtos -export PLATFORM_INCDIR = \ - -I $(SRC_DIR)/platform/$(PLATFORM)/include + +PLATFORM_INCDIR = -I $(SRC_DIR)/platform/$(PLATFORM)/include + +if XCC +PLATFORM_INCDIR += \ + -I $(ROOT_DIR)/arch/include +else +PLATFORM_INCDIR += \ + -I $(SRC_DIR)/platform/$(PLATFORM)/include/arch +endif + +export PLATFORM_INCDIR + endif dist-hook: diff --git a/configure.ac b/configure.ac index 089218f..0f34acc 100644 --- a/configure.ac +++ b/configure.ac @@ -183,6 +183,7 @@ case "$with_platform" in AC_SUBST(XTENSA_CORE) AC_DEFINE([CONFIG_APOLLOLAKE], [1], [Configure for Apololake]) + AC_DEFINE([CONFIG_BOOT_LOADER], [1], [Configure Boot Loader]) AC_DEFINE([CONFIG_IRQ_MAP], [1], [Configure IRQ maps]) AC_DEFINE([CONFIG_DMA_GW], [1], [Configure DMA Gateway]) ;; @@ -235,6 +236,7 @@ case "$with_platform" in AC_SUBST(XTENSA_CORE) AC_DEFINE([CONFIG_CANNONLAKE], [1], [Configure for Cannonlake]) + AC_DEFINE([CONFIG_BOOT_LOADER], [1], [Configure Boot Loader]) AC_DEFINE([CONFIG_IRQ_MAP], [1], [Configure IRQ maps]) AC_DEFINE([CONFIG_DMA_GW], [1], [Configure DMA Gateway]) ;; @@ -256,7 +258,7 @@ AM_CONDITIONAL(BUILD_HASWELL, test "$FW_NAME" = "hsw") AM_CONDITIONAL(BUILD_BROADWELL, test "$FW_NAME" = "bdw") AM_CONDITIONAL(BUILD_APOLLOLAKE, test "$FW_NAME" = "apl") AM_CONDITIONAL(BUILD_CANNONLAKE, test "$FW_NAME" = "cnl") -AM_CONDITIONAL(BUILD_BOOTLOADER, test "$FW_NAME" = "cnl") +AM_CONDITIONAL(BUILD_BOOTLOADER, test "$FW_NAME" = "apl" -o "$FW_NAME" = "cnl") AM_CONDITIONAL(BUILD_MODULE, test "$FW_NAME" = "apl" -o "$FW_NAME" = "cnl") AM_CONDITIONAL(BUILD_APL_SSP, test "$FW_NAME" = "apl" -o "$FW_NAME" = "cnl") @@ -370,6 +372,9 @@ if test "$have_graphviz" = "false"; then AC_MSG_WARN([Need graphviz to build documentation]) fi +# Check for compiler type +AM_CONDITIONAL(XCC, test "$CC" = "xt-xcc") + AM_EXTRA_RECURSIVE_TARGETS([bin]) AM_EXTRA_RECURSIVE_TARGETS([vminstall]) @@ -394,7 +399,7 @@ AC_CONFIG_FILES([ src/arch/host/include/Makefile src/arch/host/include/arch/Makefile src/audio/Makefile - src/math/Makefile + src/math/Makefile src/drivers/Makefile src/include/Makefile src/include/sof/Makefile @@ -412,24 +417,28 @@ AC_CONFIG_FILES([ src/platform/Makefile src/platform/baytrail/Makefile src/platform/baytrail/include/Makefile + src/platform/baytrail/include/arch/Makefile + src/platform/baytrail/include/arch/xtensa/Makefile + src/platform/baytrail/include/arch/xtensa/config/Makefile src/platform/baytrail/include/platform/Makefile - src/platform/baytrail/include/xtensa/Makefile - src/platform/baytrail/include/xtensa/config/Makefile src/platform/apollolake/Makefile src/platform/apollolake/include/Makefile + src/platform/apollolake/include/arch/Makefile + src/platform/apollolake/include/arch/xtensa/Makefile + src/platform/apollolake/include/arch/xtensa/config/Makefile src/platform/apollolake/include/platform/Makefile - src/platform/apollolake/include/xtensa/Makefile - src/platform/apollolake/include/xtensa/config/Makefile src/platform/haswell/Makefile src/platform/haswell/include/Makefile + src/platform/haswell/include/arch/Makefile + src/platform/haswell/include/arch/xtensa/Makefile + src/platform/haswell/include/arch/xtensa/config/Makefile src/platform/haswell/include/platform/Makefile - src/platform/haswell/include/xtensa/Makefile - src/platform/haswell/include/xtensa/config/Makefile src/platform/cannonlake/Makefile src/platform/cannonlake/include/Makefile + src/platform/cannonlake/include/arch/Makefile + src/platform/cannonlake/include/arch/xtensa/Makefile + src/platform/cannonlake/include/arch/xtensa/config/Makefile src/platform/cannonlake/include/platform/Makefile - src/platform/cannonlake/include/xtensa/Makefile - src/platform/cannonlake/include/xtensa/config/Makefile ]) AC_OUTPUT diff --git a/src/arch/xtensa/Makefile.am b/src/arch/xtensa/Makefile.am index 309635c..4ffe15f 100644 --- a/src/arch/xtensa/Makefile.am +++ b/src/arch/xtensa/Makefile.am @@ -5,9 +5,16 @@ noinst_PROGRAMS = \ # generate linker script from platform headers LINK_SCRIPT = ../../platform/$(PLATFORM)/$(PLATFORM_LDSCRIPT) -LINK_DEPS = \ - ../../platform/$(PLATFORM)/include/platform/memory.h \ - ../../platform/$(PLATFORM)/include/xtensa/config/core-isa* + +LINK_DEPS = ../../platform/$(PLATFORM)/include/platform/memory.h + +if XCC +LINK_DEPS += \ + $(ROOT_DIR)/arch/include/xtensa/config/core-isa* +else +LINK_DEPS += \ + ../../platform/$(PLATFORM)/include/arch/xtensa/config/core-isa* +endif nodist_sof_SOURCES = $(LINK_SCRIPT).in BUILT_SOURCES = $(LINK_SCRIPT) @@ -35,7 +42,7 @@ sof_SOURCES = \ timer.c \ task.c -if BUILD_CANNONLAKE +if BUILD_BOOTLOADER sof_SOURCES += \ main-entry.S endif diff --git a/src/arch/xtensa/boot_entry.S b/src/arch/xtensa/boot_entry.S index cf793f5..72d0e5e 100644 --- a/src/arch/xtensa/boot_entry.S +++ b/src/arch/xtensa/boot_entry.S @@ -37,8 +37,9 @@ #include <config.h> #include <platform/shim.h> +#include <platform/platcfg.h> #include <xtensa/corebits.h> -#include <xtensa/config/core-isa-boot.h> +#include <xtensa/config/core-isa.h> .type boot_pri_core, @function .type boot_sec_core, @function @@ -55,18 +56,62 @@ boot_entry: .align 4 .literal_position +#if defined(PLATFORM_RESET_MHE_AT_BOOT) l2_mecs: .word SHIM_L2_MECS +#endif + +#if defined(PLATFORM_DISABLE_L2CACHE_AT_BOOT) +l2_cache_pref: + .word SHIM_L2_PREF_CFG +#endif + +sof_stack_base: + .word SOF_STACK_BASE + +wnd0_base: + .word DMWBA(0) + +wnd0_size: + .word DMWLO(0) + +wnd0_base_val: + .word HP_SRAM_WIN0_BASE | DMWBA_READONLY | DMWBA_ENABLE + +wnd0_size_val: + .word HP_SRAM_WIN0_SIZE | 0x7 boot_init: .align 4 -#if defined(CONFIG_CANNONLAKE) +#if defined(PLATFORM_DISABLE_L2CACHE_AT_BOOT) + l32r a3, l2_cache_pref + movi a5, 0 + s32i a5, a3, 0 + memw +#endif + +#if defined(PLATFORM_RESET_MHE_AT_BOOT) /* reset memory hole */ l32r a3, l2_mecs movi a5, 0 s32i a5, a3, 0 #endif + /* reprogram stack to the area defined by main FW */ + l32r a3, sof_stack_base + mov sp, a3 + + /* realloc memory window0 to + continue reporting boot progress */ + l32r a3, wnd0_size + l32r a5, wnd0_size_val + s32i a5, a3, 0 + memw + l32r a3, wnd0_base + l32r a5, wnd0_base_val + s32i a5, a3, 0 + memw + #if (XCHAL_DCACHE_IS_COHERENT || XCHAL_LOOP_BUFFER_SIZE) && \ XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0 /* Enable zero-overhead loop instr buffer, diff --git a/src/arch/xtensa/boot_loader.c b/src/arch/xtensa/boot_loader.c index ccf8525..4acc158 100644 --- a/src/arch/xtensa/boot_loader.c +++ b/src/arch/xtensa/boot_loader.c @@ -33,6 +33,7 @@ #include <sof/trace.h> #include <sof/io.h> #include <uapi/manifest.h> +#include <platform/platform.h> #include <platform/memory.h> /* entry point to main firmware */ @@ -41,7 +42,7 @@ extern void _ResetVector(void); void boot_pri_core(void); void boot_sec_core(void); -#if defined(CONFIG_CANNONLAKE) +#if defined(CONFIG_BOOT_LOADER) /* memcopy used by boot loader */ static inline void bmemcpy(void *dest, void *src, size_t bytes) @@ -77,6 +78,7 @@ static void parse_module(struct sof_man_fw_header *hdr, /* each module has 3 segments */ for (i = 0; i < 3; i++) { + platform_trace_point(TRACE_BOOT_LDR_PARSE_SEGMENT + i); switch (mod->segment[i].flags.r.type) { case SOF_MAN_SEGMENT_TEXT: case SOF_MAN_SEGMENT_DATA: @@ -112,6 +114,7 @@ static void parse_manifest(void) /* copy module to SRAM - skip bootloader module */ for (i = 1; i < hdr->num_module_entries; i++) { + platform_trace_point(TRACE_BOOT_LDR_PARSE_MODULE + i); mod = sof_man_get_module(desc, i); parse_module(hdr, mod); } @@ -119,6 +122,7 @@ static void parse_manifest(void) #endif /* power on HPSRAM */ +#if defined(CONFIG_CANNONLAKE) static int32_t hp_sram_init(void) { int delay_count = 256; @@ -158,6 +162,14 @@ static int32_t hp_sram_init(void) return 0; } +#endif + +#if defined(CONFIG_APOLLOLAKE) +static uint32_t hp_sram_init(void) +{ + return 0; +} +#endif /* boot secondary core - i.e core ID > 0 */ void boot_sec_core(void) @@ -185,7 +197,7 @@ void boot_pri_core(void) return; } -#if defined(CONFIG_CANNONLAKE) +#if defined(CONFIG_BOOT_LOADER) /* parse manifest and copy modules */ platform_trace_point(TRACE_BOOT_LDR_MANIFEST); parse_manifest(); diff --git a/src/arch/xtensa/crt1-boards.S b/src/arch/xtensa/crt1-boards.S index ff24bfd..a66fe84 100644 --- a/src/arch/xtensa/crt1-boards.S +++ b/src/arch/xtensa/crt1-boards.S @@ -1,303 +1,313 @@ -// crt1-boards.S -// -// For most hardware / boards, this code sets up the C calling context -// (setting up stack, PS, and clearing BSS) and jumps to __clibrary_start -// which sets up the C library, calls constructors and registers destructors, -// and calls main(). -// -// Control arrives here at _start from the reset vector or from crt0-app.S. - -// Copyright (c) 1998-2010 Tensilica Inc. -// -// Permission is hereby granted, free of charge, to any person obtaining -// a copy of this software and associated documentation files (the -// "Software"), to deal in the Software without restriction, including -// without limitation the rights to use, copy, modify, merge, publish, -// distribute, sublicense, and/or sell copies of the Software, and to -// permit persons to whom the Software is furnished to do so, subject to -// the following conditions: -// -// The above copyright notice and this permission notice shall be included -// in all copies or substantial portions of the Software. -// -// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -// EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. -// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY -// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, -// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE -// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - -#include <xtensa/coreasm.h> -// DF #include "xtos-internal.h" -//#include <xtensa/../../src/xtos/xtos-internal.h> - -//.global _ResetVector -#if 0 -/* - * Reset vector. - * Only a trampoline to jump to _start - * (Note that we have to mark the section writable as the section contains - * a relocatable literal) - */ - - .section .ResetVector.text, "awx" - .global _ResetVector -_ResetVector: - - j 1f - .align 4 -2: .long _start -1: l32r a2, 2b - jx a2 -#endif - -// Exports -.global _start - -// Imports -// __clibrary_init from C library (eg. newlib or uclibc) -// exit from C library -// main from user application -// board_init board-specific (uart/mingloss/tinygloss.c) -// xthal_dcache_all_writeback from HAL library -// __stack from linker script (see LSP Ref Manual) -// _bss_table_start from linker script (see LSP Ref Manual) -// _bss_table_end from linker script (see LSP Ref Manual) - -.type main, @function - -// Macros to abstract away ABI differences - -#if __XTENSA_CALL0_ABI__ -# define CALL call0 -# define ARG1 a2 /* 1st outgoing call argument */ -# define ARG2 a3 /* 2nd outgoing call argument */ -# define ARG3 a4 /* 3rd outgoing call argument */ -# define ARG4 a5 /* 4th outgoing call argument */ -# define ARG5 a6 /* 5th outgoing call argument */ -#else -# define CALL call4 -# define CALLX callx4 -# define ARG1 a6 /* 1st outgoing call argument */ -# define ARG2 a7 /* 2nd outgoing call argument */ -# define ARG3 a8 /* 3rd outgoing call argument */ -# define ARG4 a9 /* 4th outgoing call argument */ -# define ARG5 a10 /* 5th outgoing call argument */ -#endif - - -/**************************************************************************/ - - .text - .align 4 - .literal_position -_start: - // _start is typically NOT at the beginning of the text segment -- - // it is always called from either the reset vector or other code - // that does equivalent initialization (such as crt0-app.S). - // - // Assumptions on entry to _start: - // - low (level-one) and medium priority interrupts are disabled - // via PS.INTLEVEL and/or INTENABLE (PS.INTLEVEL is expected to - // be zeroed, to potentially enable them, before calling main) - // - C calling context not initialized: - // - PS not initialized - // - SP not initialized - // - the following are initialized: - // - LITBASE, cache attributes, WindowBase, WindowStart, - // CPENABLE, FP's FCR and FSR, EXCSAVE[n] - - // Keep a0 zero. It is used to initialize a few things. - // It is also the return address, where zero indicates - // that the frame used by _start is the bottommost frame. - // -#if !XCHAL_HAVE_HALT || !XCHAL_HAVE_BOOTLOADER // not needed for Xtensa TX - movi a0, 0 // keep this register zero. -#endif - -#if XTOS_RESET_UNNEEDED && !XCHAL_HAVE_HALT -#include "reset-unneeded.S" -#endif - -#if XCHAL_HAVE_BOOTLOADER - .weak _Level2FromVector - .weak _Level3FromVector - .weak _Level4FromVector - .weak _Level5FromVector - - movi a4, _Level2FromVector - wsr a4, EXCSAVE+2 - movi a4, _Level3FromVector - wsr a4, EXCSAVE+3 - movi a4, _Level4FromVector - wsr a4, EXCSAVE+4 - movi a4, _Level5FromVector - wsr a4, EXCSAVE+5 -#endif - - // Initialize the stack pointer. - // See the "ABI and Software Conventions" chapter in the - // Xtensa ISA Reference manual for details. - - // NOTE: Because the _start routine does not use any memory in its - // stack frame, and because all of its CALL instructions use a - // window size of 4 (or zero), the stack frame for _start can be empty. - - movi sp, __stack - - /* - * Now that sp (a1) is set, we can set PS as per the application - * (user vector mode, enable interrupts, enable window exceptions if applicable). - */ -#if XCHAL_HAVE_EXCEPTIONS -# ifdef __XTENSA_CALL0_ABI__ - movi a3, PS_UM // PS.WOE = 0, PS.UM = 1, PS.EXCM = 0, PS.INTLEVEL = 0 -# else - movi a3, PS_UM|PS_WOE // PS.WOE = 1, PS.UM = 1, PS.EXCM = 0, PS.INTLEVEL = 0 -# endif - wsr a3, PS - rsync -#endif - -/* - * Do any initialization that affects the memory map, such as - * setting up TLB entries, that needs to be done before we can - * successfully clear BSS (e.g. if some BSS segments are in - * remapped areas). - * - * NOTE: This hook works where the reset vector does not unpack - * segments (see "ROM packing" in the LSP manual), or where - * unpacking of segments is not affected by memory remapping. - * If ROM unpacking is affected, TLB setup must be done in - * assembler from the reset vector. - * - * The __memmap_init() routine can be a C function, however it - * does not have BSS initialized! In particular, __memmap_init() - * cannot set BSS variables, i.e. uninitialized global variables - * (they'll be wiped out by the following BSS clear), nor can it - * assume they are yet initialized to zero. - * - * The __memmap_init() function is optional. It is marked as a - * weak symbol, so that it gets valued zero if not defined. - */ - - .weak __memmap_init - movi a4, __memmap_init - beqz a4, 1f - CALLX a4 -1: - -#if !XCHAL_HAVE_BOOTLOADER /* boot loader takes care of zeroing BSS */ - /* - * Clear the BSS (uninitialized data) segments. - * This code supports multiple zeroed sections (*.bss). - * - * Register allocation: - * a0 = 0 - * a6 = pointer to start of table, and through table - * a7 = pointer to end of table - * a8 = start address of bytes to be zeroed - * a9 = end address of bytes to be zeroed - * a10 = length of bytes to be zeroed - */ - movi a0, 0 - movi a6, _bss_table_start - movi a7, _bss_table_end - bgeu a6, a7, .L3zte - -.L0zte: l32i a8, a6, 0 // get start address, assumed multiple of 4 - l32i a9, a6, 4 // get end address, assumed multiple of 4 - addi a6, a6, 8 // next entry - sub a10, a9, a8 // a10 = length, assumed a multiple of 4 - bbci.l a10, 2, .L1zte - s32i a0, a8, 0 // clear 4 bytes to make length multiple of 8 - addi a8, a8, 4 -.L1zte: bbci.l a10, 3, .L2zte - s32i a0, a8, 0 // clear 8 bytes to make length multiple of 16 - s32i a0, a8, 4 - addi a8, a8, 8 -.L2zte: srli a10, a10, 4 // length is now multiple of 16, divide by 16 - floopnez a10, clearzte - s32i a0, a8, 0 // clear 16 bytes at a time... - s32i a0, a8, 4 - s32i a0, a8, 8 - s32i a0, a8, 12 - addi a8, a8, 16 - floopend a10, clearzte - - bltu a6, a7, .L0zte // loop until end of table of *.bss sections -.L3zte: -#endif - - - // We can now call C code, the C calling environment has been initialized. - // - // From this point on, we use ABI-specific macros to refer to registers a0 .. a15 - // (ARG#). - - -#if XCHAL_HAVE_HALT - // Assume minimalist environment for memory-constrained TX cores. - // No C library or board initialization, no parameters passed to main - // (assume declared as "void main(void)") and no call to exit(). - - CALL main - halt - -#else /* !HALT */ - - .type board_init, @function - .type __clibrary_init, @function - .type exit, @function - - - // Initialize the board (eg. the UART on the XT2000). - //CALL board_init - - /* - * Call __clibrary_init to initialize the C library: - * - * void __clibrary_init(int argc, char ** argv, char ** environ, - * void(*init_func)(void), void(*fini_func)(void)); - */ - - // Pass an empty argv array, with an empty string as the program name. -#if 0 - movi ARG1, _start_argc // argc address - movi ARG2, _start_argv // argv = ["", 0] - movi ARG3, _start_envp // envp = [0] -// movi ARG4, _init // function that calls constructors -// movi ARG5, _fini // function that calls destructors - l32i ARG1, ARG1, 0 // argc = 1 - CALL __clibrary_init -#endif - // Call: int main(int argc, char ** argv, char ** environ); - movi ARG1, _start_argc // argc address - movi ARG2, _start_argv // argv = ["", 0] - movi ARG3, _start_envp // envp = [0] - l32i ARG1, ARG1, 0 // argc = 1 - CALL main - // The return value is the same register as the first outgoing argument. -// CALL exit // exit with main's return value - // Does not return here. - - .data - // Mark argc/argv/envp parameters as weak so that an external - // object file can override them. - .weak _start_argc, _start_argv, _start_envp - .align 4 -_start_argv: - .word _start_null // empty program name -_start_null: -_start_envp: - .word 0 // end of argv array, empty string, empty environ -_start_argc: - .word 1 // one argument (program name) - .text - -#endif /* !HALT */ - - .size _start, . - _start - -//#endif +// crt1-boards.S +// +// For most hardware / boards, this code sets up the C calling context +// (setting up stack, PS, and clearing BSS) and jumps to __clibrary_start +// which sets up the C library, calls constructors and registers destructors, +// and calls main(). +// +// Control arrives here at _start from the reset vector or from crt0-app.S. + +// Copyright (c) 1998-2010 Tensilica Inc. +// +// Permission is hereby granted, free of charge, to any person obtaining +// a copy of this software and associated documentation files (the +// "Software"), to deal in the Software without restriction, including +// without limitation the rights to use, copy, modify, merge, publish, +// distribute, sublicense, and/or sell copies of the Software, and to +// permit persons to whom the Software is furnished to do so, subject to +// the following conditions: +// +// The above copyright notice and this permission notice shall be included +// in all copies or substantial portions of the Software. +// +// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +// EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY +// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +#include <xtensa/coreasm.h> +#include <config.h> +// DF #include "xtos-internal.h" +//#include <xtensa/../../src/xtos/xtos-internal.h> + +//.global _ResetVector +#if 0 +/* + * Reset vector. + * Only a trampoline to jump to _start + * (Note that we have to mark the section writable as the section contains + * a relocatable literal) + */ + + .section .ResetVector.text, "awx" + .global _ResetVector +_ResetVector: + + j 1f + .align 4 +2: .long _start +1: l32r a2, 2b + jx a2 +#endif + +// Exports +.global _start + +// Imports +// __clibrary_init from C library (eg. newlib or uclibc) +// exit from C library +// main from user application +// board_init board-specific (uart/mingloss/tinygloss.c) +// xthal_dcache_all_writeback from HAL library +// __stack from linker script (see LSP Ref Manual) +// _bss_table_start from linker script (see LSP Ref Manual) +// _bss_table_end from linker script (see LSP Ref Manual) + +.type main, @function + +// Macros to abstract away ABI differences + +#if __XTENSA_CALL0_ABI__ +# define CALL call0 +# define ARG1 a2 /* 1st outgoing call argument */ +# define ARG2 a3 /* 2nd outgoing call argument */ +# define ARG3 a4 /* 3rd outgoing call argument */ +# define ARG4 a5 /* 4th outgoing call argument */ +# define ARG5 a6 /* 5th outgoing call argument */ +#else +# define CALL call4 +# define CALLX callx4 +# define ARG1 a6 /* 1st outgoing call argument */ +# define ARG2 a7 /* 2nd outgoing call argument */ +# define ARG3 a8 /* 3rd outgoing call argument */ +# define ARG4 a9 /* 4th outgoing call argument */ +# define ARG5 a10 /* 5th outgoing call argument */ +#endif + + +/**************************************************************************/ + + .text + .align 4 + .literal_position +_start: + // _start is typically NOT at the beginning of the text segment -- + // it is always called from either the reset vector or other code + // that does equivalent initialization (such as crt0-app.S). + // + // Assumptions on entry to _start: + // - low (level-one) and medium priority interrupts are disabled + // via PS.INTLEVEL and/or INTENABLE (PS.INTLEVEL is expected to + // be zeroed, to potentially enable them, before calling main) + // - C calling context not initialized: + // - PS not initialized + // - SP not initialized + // - the following are initialized: + // - LITBASE, cache attributes, WindowBase, WindowStart, + // CPENABLE, FP's FCR and FSR, EXCSAVE[n] + + // Keep a0 zero. It is used to initialize a few things. + // It is also the return address, where zero indicates + // that the frame used by _start is the bottommost frame. + // + +// not needed for Xtensa TX +#if !XCHAL_HAVE_HALT || !defined(CONFIG_BOOT_LOADER) + movi a0, 0 // keep this register zero. +#endif + +#if XTOS_RESET_UNNEEDED && !XCHAL_HAVE_HALT +#include "reset-unneeded.S" +#endif + +#if defined(CONFIG_BOOT_LOADER) + .weak _Level2FromVector + .weak _Level3FromVector + .weak _Level4FromVector + .weak _Level5FromVector + + movi a4, _Level2FromVector + wsr a4, EXCSAVE+2 + movi a4, _Level3FromVector + wsr a4, EXCSAVE+3 + movi a4, _Level4FromVector + wsr a4, EXCSAVE+4 + movi a4, _Level5FromVector + wsr a4, EXCSAVE+5 +#endif + + // Initialize the stack pointer. + // See the "ABI and Software Conventions" chapter in the + // Xtensa ISA Reference manual for details. + + // NOTE: Because the _start routine does not use any memory in its + // stack frame, and because all of its CALL instructions use a + // window size of 4 (or zero), the stack frame for _start can be empty. + + movi sp, __stack + + /* + * Now that sp (a1) is set, we can set PS as per the application + * (user vector mode, enable interrupts, + * enable window exceptions if applicable). + */ +#if XCHAL_HAVE_EXCEPTIONS +# ifdef __XTENSA_CALL0_ABI__ + // PS.WOE = 0, PS.UM = 1, PS.EXCM = 0, PS.INTLEVEL = 0 + movi a3, PS_UM +# else + // PS.WOE = 1, PS.UM = 1, PS.EXCM = 0, PS.INTLEVEL = 0 + movi a3, PS_UM|PS_WOE +# endif + wsr a3, PS + rsync +#endif + +/* + * Do any initialization that affects the memory map, such as + * setting up TLB entries, that needs to be done before we can + * successfully clear BSS (e.g. if some BSS segments are in + * remapped areas). + * + * NOTE: This hook works where the reset vector does not unpack + * segments (see "ROM packing" in the LSP manual), or where + * unpacking of segments is not affected by memory remapping. + * If ROM unpacking is affected, TLB setup must be done in + * assembler from the reset vector. + * + * The __memmap_init() routine can be a C function, however it + * does not have BSS initialized! In particular, __memmap_init() + * cannot set BSS variables, i.e. uninitialized global variables + * (they'll be wiped out by the following BSS clear), nor can it + * assume they are yet initialized to zero. + * + * The __memmap_init() function is optional. It is marked as a + * weak symbol, so that it gets valued zero if not defined. + */ + + .weak __memmap_init + movi a4, __memmap_init + beqz a4, 1f + CALLX a4 +1: + +/* boot loader takes care of zeroing BSS */ +#if !defined(CONFIG_BOOT_LOADER) + /* + * Clear the BSS (uninitialized data) segments. + * This code supports multiple zeroed sections (*.bss). + * + * Register allocation: + * a0 = 0 + * a6 = pointer to start of table, and through table + * a7 = pointer to end of table + * a8 = start address of bytes to be zeroed + * a9 = end address of bytes to be zeroed + * a10 = length of bytes to be zeroed + */ + movi a0, 0 + movi a6, _bss_table_start + movi a7, _bss_table_end + bgeu a6, a7, .L3zte + +.L0zte: l32i a8, a6, 0 // get start address, assumed multiple of 4 + l32i a9, a6, 4 // get end address, assumed multiple of 4 + addi a6, a6, 8 // next entry + sub a10, a9, a8 // a10 = length, assumed a multiple of 4 + bbci.l a10, 2, .L1zte + s32i a0, a8, 0 // clear 4 bytes to make length multiple of 8 + addi a8, a8, 4 +.L1zte: bbci.l a10, 3, .L2zte + s32i a0, a8, 0 // clear 8 bytes to make length multiple of 16 + s32i a0, a8, 4 + addi a8, a8, 8 +.L2zte: srli a10, a10, 4 // length is now multiple of 16, divide by 16 + floopnez a10, clearzte + s32i a0, a8, 0 // clear 16 bytes at a time... + s32i a0, a8, 4 + s32i a0, a8, 8 + s32i a0, a8, 12 + addi a8, a8, 16 + floopend a10, clearzte + + bltu a6, a7, .L0zte // loop until end of table of *.bss sections +.L3zte: +#endif + + + // We can now call C code, + // the C calling environment has been initialized. + // + // From this point on, we use ABI-specific macros to refer + // to registers a0 .. a15 + // (ARG#). + + +#if XCHAL_HAVE_HALT + // Assume minimalist environment for memory-constrained TX cores. + // No C library or board initialization, no parameters passed to main + // (assume declared as "void main(void)") and no call to exit(). + + CALL main + halt + +#else /* !HALT */ + + .type board_init, @function + .type __clibrary_init, @function + .type exit, @function + + + // Initialize the board (eg. the UART on the XT2000). + //CALL board_init + + /* + * Call __clibrary_init to initialize the C library: + * + * void __clibrary_init(int argc, char ** argv, char ** environ, + * void(*init_func)(void), void(*fini_func)(void)); + */ + + // Pass an empty argv array, with an empty string as the program name. +#if 0 + movi ARG1, _start_argc // argc address + movi ARG2, _start_argv // argv = ["", 0] + movi ARG3, _start_envp // envp = [0] +// movi ARG4, _init // function that calls constructors +// movi ARG5, _fini // function that calls destructors + l32i ARG1, ARG1, 0 // argc = 1 + CALL __clibrary_init +#endif + // Call: int main(int argc, char ** argv, char ** environ); + movi ARG1, _start_argc // argc address + movi ARG2, _start_argv // argv = ["", 0] + movi ARG3, _start_envp // envp = [0] + l32i ARG1, ARG1, 0 // argc = 1 + CALL main + // The return value is the same register + // as the first outgoing argument. +// CALL exit // exit with main's return value + // Does not return here. + + .data + // Mark argc/argv/envp parameters as weak so that an external + // object file can override them. + .weak _start_argc, _start_argv, _start_envp + .align 4 +_start_argv: + .word _start_null // empty program name +_start_null: +_start_envp: + .word 0 // end of argv array, empty string, empty environ +_start_argc: + .word 1 // one argument (program name) + .text + +#endif /* !HALT */ + + .size _start, . - _start + +//#endif diff --git a/src/arch/xtensa/reset-vector.S b/src/arch/xtensa/reset-vector.S index 397dbe2..099a578 100644 --- a/src/arch/xtensa/reset-vector.S +++ b/src/arch/xtensa/reset-vector.S @@ -35,7 +35,7 @@ #include "xtos-internal.h" #include <config.h> -#if XCHAL_HAVE_BOOTLOADER +#if CONFIG_BOOT_LOADER #include <platform/memory.h> #endif @@ -119,7 +119,7 @@ _reset_sram: # endif # endif -#if defined(CONFIG_APOLLOLAKE) || defined(CONFIG_CANNONLAKE) +#if defined(CONFIG_BOOT_LOADER) .section .ResetHandler.text, "ax" j _ResetHandler #endif @@ -525,7 +525,7 @@ unpackdone: */ #if HAVE_XSR -#if !XCHAL_HAVE_BOOTLOADER +#if !defined(CONFIG_BOOT_LOADER) /* For asm macros; works for positive a,b smaller than 1000: */ # define GREATERTHAN(a,b) (((b)-(a)) & ~0xFFF) @@ -579,7 +579,7 @@ unpackdone: * Note: This needs to be call0 regardless of the selected ABI. */ -#if XCHAL_HAVE_BOOTLOADER +#if CONFIG_BOOT_LOADER /*ToDo refine the _start*/ movi a0, SOF_TEXT_START callx0 a0 diff --git a/src/arch/xtensa/xtos/crt1-boards.S b/src/arch/xtensa/xtos/crt1-boards.S index 7df5a4b..5704826 100644 --- a/src/arch/xtensa/xtos/crt1-boards.S +++ b/src/arch/xtensa/xtos/crt1-boards.S @@ -30,6 +30,7 @@ #include <xtensa/coreasm.h> #include "xtos-internal.h" +#include <config.h> // Exports @@ -92,7 +93,9 @@ _start: // It is also the return address, where zero indicates // that the frame used by _start is the bottommost frame. // -#if !XCHAL_HAVE_HALT || !XCHAL_HAVE_BOOTLOADER // not needed for Xtensa TX + +// not needed for Xtensa TX +#if !XCHAL_HAVE_HALT || !defined(CONFIG_BOOT_LOADER) movi a0, 0 // keep this register zero. #endif @@ -152,8 +155,8 @@ _start: CALLX a4 1: - -#if !XCHAL_HAVE_BOOTLOADER /* boot loader takes care of zeroing BSS */ +/* boot loader takes care of zeroing BSS */ +#if !defined(CONFIG_BOOT_LOADER) # ifdef __XTENSA_CALL0_ABI__ // Clear a0 again as possible CALLX to __memmap_init changed it. diff --git a/src/arch/xtensa/xtos/crt1-sim.S b/src/arch/xtensa/xtos/crt1-sim.S index 6d4a5f1..19f7f7d 100644 --- a/src/arch/xtensa/xtos/crt1-sim.S +++ b/src/arch/xtensa/xtos/crt1-sim.S @@ -28,6 +28,7 @@ #include <xtensa/simcall.h> #include <xtensa/coreasm.h> #include "xtos-internal.h" +#include <config.h> // Exports @@ -184,7 +185,9 @@ _start: /* The new ISS simcall only appeared after RB-2007.2: */ -#if !XCHAL_HAVE_BOOTLOADER && (XCHAL_HW_MAX_VERSION > XTENSA_HWVERSION_RB_2007_2) /* pre-LX2 cores only */ +#if !defined(CONFIG_BOOT_LOADER) && + /* pre-LX2 cores only */ + (XCHAL_HW_MAX_VERSION > XTENSA_HWVERSION_RB_2007_2) /* * Clear the BSS (uninitialized data) segments. * This code supports multiple zeroed sections (*.bss). diff --git a/src/arch/xtensa/xtos/crt1-tiny.S b/src/arch/xtensa/xtos/crt1-tiny.S index c798ad0..bc6360f 100644 --- a/src/arch/xtensa/xtos/crt1-tiny.S +++ b/src/arch/xtensa/xtos/crt1-tiny.S @@ -34,6 +34,7 @@ #include <xtensa/coreasm.h> #include <xtensa/xtensa-versions.h> #include <xtensa/simcall.h> +#include <config.h> // Imports @@ -63,7 +64,8 @@ _start: // See crt1-boards.S for assumptions on entry to _start , // and for comments on what is being done in this file. -#if !XCHAL_HAVE_HALT || !XCHAL_HAVE_BOOTLOADER // not needed for Xtensa TX +// not needed for Xtensa TX +#if !XCHAL_HAVE_HALT || !defined(CONFIG_BOOT_LOADER) movi a0, 0 // mark base of call stack #endif @@ -85,7 +87,7 @@ _start: // This code only supports .bss, not multiple *.bss sections. // Corresponding code in crt1-boards.S does, and is faster but bigger. -#if !XCHAL_HAVE_BOOTLOADER +#if !defined(CONFIG_BOOT_LOADER) movi a6, _bss_start movi a7, _bss_end bgeu a6, a7, 2f diff --git a/src/include/sof/trace.h b/src/include/sof/trace.h index 2fd77fe..0e339b5 100644 --- a/src/include/sof/trace.h +++ b/src/include/sof/trace.h @@ -47,6 +47,9 @@ #define TRACE_BOOT_LDR_MANIFEST 0x120 #define TRACE_BOOT_LDR_JUMP 0x150 +#define TRACE_BOOT_LDR_PARSE_MODULE 0x210 +#define TRACE_BOOT_LDR_PARSE_SEGMENT 0x220 + /* general trace init codes - only used at boot when main trace is not available */ #define TRACE_BOOT_START 0x1000 #define TRACE_BOOT_ARCH 0x2000 diff --git a/src/platform/apollolake/Makefile.am b/src/platform/apollolake/Makefile.am index fcf321e..417a13d 100644 --- a/src/platform/apollolake/Makefile.am +++ b/src/platform/apollolake/Makefile.am @@ -1,6 +1,8 @@ SUBDIRS = include -EXTRA_DIST = apollolake.x.in +EXTRA_DIST = \ + apollolake.x.in \ + boot_ldr.x.in noinst_LIBRARIES = libplatform.a @@ -19,7 +21,7 @@ libplatform_a_CFLAGS = \ $(SOF_INCDIR) \ $(PLATFORM_INCDIR) -noinst_PROGRAMS = module +noinst_PROGRAMS = module boot_module module_SOURCES = \ base_module.c @@ -28,3 +30,11 @@ module_CFLAGS = \ $(ARCH_INCDIR) \ $(SOF_INCDIR) \ $(PLATFORM_INCDIR) + +boot_module_SOURCES = \ + boot_module.c + +boot_module_CFLAGS = \ + $(ARCH_INCDIR) \ + $(SOF_INCDIR) \ + $(PLATFORM_INCDIR) diff --git a/src/platform/apollolake/apollolake.x.in b/src/platform/apollolake/apollolake.x.in index 76fbeb7..5802cc5 100644 --- a/src/platform/apollolake/apollolake.x.in +++ b/src/platform/apollolake/apollolake.x.in @@ -14,12 +14,6 @@ OUTPUT_ARCH(xtensa) MEMORY { - vector_reset_text : - org = XCHAL_RESET_VECTOR0_PADDR, - len = SOF_MEM_RESET_TEXT_SIZE - vector_reset_lit : - org = XCHAL_RESET_VECTOR0_PADDR + SOF_MEM_RESET_TEXT_SIZE, - len = SOF_MEM_RESET_LIT_SIZE vector_memory_lit : org = XCHAL_MEMERROR_VECTOR_PADDR + SOF_MEM_ERROR_LIT_SIZE, len = SOF_MEM_ERROR_LIT_SIZE @@ -27,65 +21,62 @@ MEMORY org = XCHAL_MEMERROR_VECTOR_PADDR, len = SOF_MEM_ERROR_TEXT_SIZE vector_base_text : - org = XCHAL_VECBASE_RESET_PADDR, + org = SOF_MEM_VECBASE, len = SOF_MEM_VECBASE_LIT_SIZE vector_int2_lit : - org = XCHAL_INTLEVEL2_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL2_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int2_text : - org = XCHAL_INTLEVEL2_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL2_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int3_lit : - org = XCHAL_INTLEVEL3_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL3_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int3_text : - org = XCHAL_INTLEVEL3_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL3_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int4_lit : - org = XCHAL_INTLEVEL4_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL4_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int4_text : - org = XCHAL_INTLEVEL4_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL4_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int5_lit : - org = XCHAL_INTLEVEL5_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL5_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int5_text : - org = XCHAL_INTLEVEL5_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL5_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int6_lit : - org = XCHAL_INTLEVEL6_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL6_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int6_text : - org = XCHAL_INTLEVEL6_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL6_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int7_lit : - org = XCHAL_INTLEVEL7_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL7_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int7_text : - org = XCHAL_INTLEVEL7_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL7_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_kernel_lit : - org = XCHAL_KERNEL_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_KERNEL_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_kernel_text : - org = XCHAL_KERNEL_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_KERNEL_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_user_lit : - org = XCHAL_USER_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_USER_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_user_text : - org = XCHAL_USER_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_USER_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_double_lit : - org = XCHAL_DOUBLEEXC_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_DOUBLEEXC_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_double_text : - org = XCHAL_DOUBLEEXC_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_DOUBLEEXC_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE - sof_text_start : - org = SOF_TEXT_START, - len = SOF_TEXT_START_SIZE, sof_text : org = SOF_TEXT_BASE, len = SOF_TEXT_SIZE, @@ -107,6 +98,21 @@ MEMORY sof_stack : org = SOF_STACK_END, len = SOF_STACK_BASE - SOF_STACK_END + buffer_hp_heap : + org = HEAP_HP_BUFFER_BASE, + len = HEAP_HP_BUFFER_SIZE + wnd0 : + org = HP_SRAM_WIN0_BASE, + len = HP_SRAM_WIN0_SIZE + wnd1 : + org = HP_SRAM_WIN1_BASE, + len = HP_SRAM_WIN1_SIZE + wnd2 : + org = HP_SRAM_WIN2_BASE, + len = HP_SRAM_WIN2_SIZE + wnd3 : + org = HP_SRAM_WIN3_BASE, + len = HP_SRAM_WIN3_SIZE } PHDRS @@ -134,7 +140,6 @@ PHDRS vector_user_text_phdr PT_LOAD; vector_double_lit_phdr PT_LOAD; vector_double_text_phdr PT_LOAD; - sof_text_start_phdr PT_LOAD; sof_text_phdr PT_LOAD; sof_data_phdr PT_LOAD; sof_bss_data_phdr PT_LOAD; @@ -142,10 +147,15 @@ PHDRS runtime_heap_phdr PT_LOAD; buffer_heap_phdr PT_LOAD; sof_stack_phdr PT_LOAD; + buffer_hp_heap_phdr PT_LOAD; + wnd0_phdr PT_LOAD; + wnd1_phdr PT_LOAD; + wnd2_phdr PT_LOAD; + wnd3_phdr PT_LOAD; } /* Default entry point: */ -ENTRY(_ResetVector) +ENTRY(_MainEntry) _rom_store_table = 0; /* ABI0 does not use Window base */ @@ -171,20 +181,6 @@ PROVIDE(_memmap_cacheattr_reset = _memmap_cacheattr_wbna_trapnull); SECTIONS { - .ResetVector.text : ALIGN(4) - { - _ResetVector_text_start = ABSOLUTE(.); - KEEP (*(.ResetVector.text)) - _ResetVector_text_end = ABSOLUTE(.); - } >vector_reset_text :vector_reset_text_phdr - - .ResetVector.literal : ALIGN(4) - { - _ResetVector_literal_start = ABSOLUTE(.); - *(.ResetVector.literal) - _ResetVector_literal_end = ABSOLUTE(.); - } >vector_reset_lit :vector_reset_lit_phdr - .MemoryExceptionVector.literal : ALIGN(4) { _MemoryExceptionVector_literal_start = ABSOLUTE(.); @@ -199,6 +195,46 @@ SECTIONS _MemoryExceptionVector_text_end = ABSOLUTE(.); } >vector_memory_text :vector_memory_text_phdr + .buffer_hp_heap (NOLOAD) : ALIGN(8) + { + . = ALIGN (32); + _buffer_hp_heap_start = ABSOLUTE(.); + . = . + HEAP_HP_BUFFER_SIZE; + _buffer_hp_heap_end = ABSOLUTE(.); + } >buffer_hp_heap :buffer_hp_heap_phdr + + .wnd0 (NOLOAD) : ALIGN(8) + { + . = ALIGN (32); + _wnd0_start = ABSOLUTE(.); + . = . + HP_SRAM_WIN0_SIZE; + _wnd0_end = ABSOLUTE(.); + } >wnd0 :wnd0_phdr + + .wnd1 (NOLOAD) : ALIGN(8) + { + . = ALIGN (32); + _wnd1_start = ABSOLUTE(.); + . = . + HP_SRAM_WIN1_SIZE; + _wnd1_end = ABSOLUTE(.); + } >wnd1 :wnd1_phdr + + .wnd2 (NOLOAD) : ALIGN(8) + { + . = ALIGN (32); + _wnd2_start = ABSOLUTE(.); + . = . + HP_SRAM_WIN2_SIZE; + _wnd2_end = ABSOLUTE(.); + } >wnd2 :wnd2_phdr + + .wnd3 (NOLOAD) : ALIGN(8) + { + . = ALIGN (32); + _wnd3_start = ABSOLUTE(.); + . = . + HP_SRAM_WIN3_SIZE; + _wnd3_end = ABSOLUTE(.); + } >wnd3 :wnd3_phdr + .WindowVectors.text : ALIGN(4) { _WindowVectors_text_start = ABSOLUTE(.); @@ -332,17 +368,11 @@ SECTIONS _DoubleExceptionVector_text_end = ABSOLUTE(.); } >vector_double_text :vector_double_text_phdr - .ResetHandler.text : ALIGN(4) - { - _ResetHandler_text_start = ABSOLUTE(.); - KEEP (*(.ResetHandler.text)) - _ResetHandler_text_end = ABSOLUTE(.); - } >sof_text_start :sof_text_start_phdr - .text : ALIGN(4) { _stext = .; _text_start = ABSOLUTE(.); + KEEP (*(.MainEntry.text)) *(.entry.text) *(.init.literal) KEEP(*(.init)) @@ -539,4 +569,5 @@ SECTIONS . = . + SOF_STACK_SIZE; _sof_stack_end = ABSOLUTE(.); } >sof_stack :sof_stack_phdr + } diff --git a/src/platform/apollolake/boot_ldr.x.in b/src/platform/apollolake/boot_ldr.x.in new file mode 100644 index 0000000..7465f9f --- /dev/null +++ b/src/platform/apollolake/boot_ldr.x.in @@ -0,0 +1,236 @@ +/* + * Linker Script for Apollolake Bootloader. + * + * This script is run through the GNU C preprocessor to align the memory + * offsets with headers. + * + * Use spaces for formatting as cpp ignore tab sizes. + */ + +#include <platform/memory.h> +#include <xtensa/config/core-isa.h> + +OUTPUT_ARCH(xtensa) + +MEMORY +{ + boot_entry_text : + org = IMR_BOOT_LDR_TEXT_ENTRY_BASE, + len = IMR_BOOT_LDR_TEXT_ENTRY_SIZE + boot_entry_lit : + org = IMR_BOOT_LDR_LIT_BASE, + len = IMR_BOOT_LDR_LIT_SIZE + sof_text : + org = IMR_BOOT_LDR_TEXT_BASE, + len = IMR_BOOT_LDR_TEXT_SIZE, + sof_data : + org = IMR_BOOT_LDR_DATA_BASE, + len = IMR_BOOT_LDR_DATA_SIZE + sof_bss_data : + org = IMR_BOOT_LDR_BSS_BASE, + len = IMR_BOOT_LDR_BSS_SIZE + sof_stack : + org = SOF_STACK_END, + len = SOF_STACK_BASE - SOF_STACK_END + wnd0 : + org = HP_SRAM_WIN0_BASE, + len = HP_SRAM_WIN0_SIZE +} + +PHDRS +{ + boot_entry_text_phdr PT_LOAD; + boot_entry_lit_phdr PT_LOAD; + sof_text_phdr PT_LOAD; + sof_data_phdr PT_LOAD; + sof_bss_data_phdr PT_LOAD; + sof_stack_phdr PT_LOAD; + wnd0_phdr PT_LOAD; +} + +/* Default entry point: */ +ENTRY(boot_entry) +EXTERN(reset_vector) + +SECTIONS +{ + .boot_entry.text : ALIGN(4) + { + _boot_entry_text_start = ABSOLUTE(.); + KEEP (*(.boot_entry.text)) + _boot_entry_text_end = ABSOLUTE(.); + } >boot_entry_text :boot_entry_text_phdr + + .boot_entry.literal : ALIGN(4) + { + _boot_entry_literal_start = ABSOLUTE(.); + *(.boot_entry.literal) + *(.literal .literal.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*) + _boot_entry_literal_end = ABSOLUTE(.); + } >boot_entry_lit :boot_entry_lit_phdr + + .text : ALIGN(4) + { + _stext = .; + _text_start = ABSOLUTE(.); + *(.entry.text) + *(.init.literal) + KEEP(*(.init)) + *( .text .text.*) + *(.fini.literal) + KEEP(*(.fini)) + *(.gnu.version) + KEEP (*(.ResetVector.text)) + KEEP (*(.ResetHandler.text)) + _text_end = ABSOLUTE(.); + _etext = .; + } >sof_text :sof_text_phdr + + .rodata : ALIGN(4) + { + _rodata_start = ABSOLUTE(.); + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r.*) + *(.rodata1) + __XT_EXCEPTION_TABLE__ = ABSOLUTE(.); + KEEP (*(.xt_except_table)) + KEEP (*(.gcc_except_table)) + *(.gnu.linkonce.e.*) + *(.gnu.version_r) + KEEP (*(.eh_frame)) + /* C++ constructor and destructor tables, properly ordered: */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + /* C++ exception handlers table: */ + __XT_EXCEPTION_DESCS__ = ABSOLUTE(.); + *(.xt_except_desc) + *(.gnu.linkonce.h.*) + __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.); + *(.xt_except_desc_end) + *(.dynamic) + *(.gnu.version_d) + . = ALIGN(4); /* this table MUST be 4-byte aligned */ + _bss_table_start = ABSOLUTE(.); + LONG(_bss_start) + LONG(_bss_end) + _bss_table_end = ABSOLUTE(.); + _rodata_end = ABSOLUTE(.); + } >sof_data :sof_data_phdr + + .data : ALIGN(4) + { + _data_start = ABSOLUTE(.); + *(.data) + *(.data.*) + *(.gnu.linkonce.d.*) + KEEP(*(.gnu.linkonce.d.*personality*)) + *(.data1) + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + *(.sdata2) + *(.sdata2.*) + *(.gnu.linkonce.s2.*) + KEEP(*(.jcr)) + _data_end = ABSOLUTE(.); + } >sof_data :sof_data_phdr + + .lit4 : ALIGN(4) + { + _lit4_start = ABSOLUTE(.); + *(*.lit4) + *(.lit4.*) + *(.gnu.linkonce.lit4.*) + _lit4_end = ABSOLUTE(.); + } >sof_data :sof_data_phdr + + .bss (NOLOAD) : ALIGN(8) + { + . = ALIGN (8); + _bss_start = ABSOLUTE(.); + *(.dynsbss) + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + *(.sbss2) + *(.sbss2.*) + *(.gnu.linkonce.sb2.*) + *(.dynbss) + *(.bss) + *(.bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + . = ALIGN (8); + _bss_end = ABSOLUTE(.); + } >sof_bss_data :sof_bss_data_phdr + + _man = 0x1234567; + + PROVIDE(_memmap_vecbase_reset = HP_SRAM_VECBASE_RESET); + + _memmap_cacheattr_wbna_trapnull = 0xFF42FFF2; + PROVIDE(_memmap_cacheattr_reset = _memmap_cacheattr_wbna_trapnull); + + __stack = SOF_STACK_BASE; + __wnd0 = HP_SRAM_WIN0_BASE; + __wnd0_size = HP_SRAM_WIN0_SIZE; + + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + + .xt.insn 0 : + { + KEEP (*(.xt.insn)) + KEEP (*(.gnu.linkonce.x.*)) + } + .xt.prop 0 : + { + KEEP (*(.xt.prop)) + KEEP (*(.xt.prop.*)) + KEEP (*(.gnu.linkonce.prop.*)) + } + .xt.lit 0 : + { + KEEP (*(.xt.lit)) + KEEP (*(.xt.lit.*)) + KEEP (*(.gnu.linkonce.p.*)) + } + .xt.profile_range 0 : + { + KEEP (*(.xt.profile_range)) + KEEP (*(.gnu.linkonce.profile_range.*)) + } + .xt.profile_ranges 0 : + { + KEEP (*(.xt.profile_ranges)) + KEEP (*(.gnu.linkonce.xt.profile_ranges.*)) + } + .xt.profile_files 0 : + { + KEEP (*(.xt.profile_files)) + KEEP (*(.gnu.linkonce.xt.profile_files.*)) + } +} diff --git a/src/platform/apollolake/boot_module.c b/src/platform/apollolake/boot_module.c new file mode 100644 index 0000000..a4dfe1e --- /dev/null +++ b/src/platform/apollolake/boot_module.c @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2018, Intel Corporation + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the Intel Corporation nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * Author: Marcin Maka <marcin.maka(a)linux.intel.com> + */ + +#include <uapi/manifest.h> +#include <platform/memory.h> + +/* + * Each module has an entry in the FW manifest header. This is NOT part of + * the SOF executable image but is inserted by object copy as a ELF section + * for parsing by rimage (to generate the manifest). + */ +struct sof_man_module_manifest apl_bootldr_manifest = { + .module = { + .name = "BRNGUP", + .uuid = {0xcc, 0x48, 0x7b, 0x0d, 0xa9, 0x1e, 0x0a, 0x47, + 0xa8, 0xc1, 0x53, 0x34, 0x24, 0x52, 0x8a, 0x17}, + .entry_point = IMR_BOOT_LDR_TEXT_ENTRY_BASE, + .type = { + .load_type = SOF_MAN_MOD_TYPE_MODULE, + .domain_ll = 1, + }, + .affinity_mask = 3, + }, +}; + +/* not used, but stops linker complaining */ +int _start; diff --git a/src/platform/apollolake/include/Makefile.am b/src/platform/apollolake/include/Makefile.am index 19f40eb..c5113a4 100644 --- a/src/platform/apollolake/include/Makefile.am +++ b/src/platform/apollolake/include/Makefile.am @@ -1 +1 @@ -SUBDIRS = platform xtensa +SUBDIRS = arch platform diff --git a/src/platform/apollolake/include/arch/Makefile.am b/src/platform/apollolake/include/arch/Makefile.am new file mode 100644 index 0000000..63616bf --- /dev/null +++ b/src/platform/apollolake/include/arch/Makefile.am @@ -0,0 +1 @@ +SUBDIRS = xtensa diff --git a/src/platform/apollolake/include/xtensa/Makefile.am b/src/platform/apollolake/include/arch/xtensa/Makefile.am similarity index 100% rename from src/platform/apollolake/include/xtensa/Makefile.am rename to src/platform/apollolake/include/arch/xtensa/Makefile.am diff --git a/src/platform/apollolake/include/xtensa/config/Makefile.am b/src/platform/apollolake/include/arch/xtensa/config/Makefile.am similarity index 100% rename from src/platform/apollolake/include/xtensa/config/Makefile.am rename to src/platform/apollolake/include/arch/xtensa/config/Makefile.am diff --git a/src/platform/apollolake/include/xtensa/config/core-isa.h b/src/platform/apollolake/include/arch/xtensa/config/core-isa.h similarity index 95% rename from src/platform/apollolake/include/xtensa/config/core-isa.h rename to src/platform/apollolake/include/arch/xtensa/config/core-isa.h index 5768437..eedbd1c 100644 --- a/src/platform/apollolake/include/xtensa/config/core-isa.h +++ b/src/platform/apollolake/include/arch/xtensa/config/core-isa.h @@ -28,6 +28,8 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ + #ifndef _XTENSA_CORE_CONFIGURATION_H #define _XTENSA_CORE_CONFIGURATION_H @@ -488,8 +490,8 @@ #define XCHAL_HAVE_MEM_ECC_PARITY 1 /* local memory ECC/parity */ #define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ #define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ -#define XCHAL_VECBASE_RESET_VADDR 0xa000a400 /* VECBASE reset value */ -#define XCHAL_VECBASE_RESET_PADDR 0xa000a400 +#define XCHAL_VECBASE_RESET_VADDR 0xBEFE0800 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0xBEFE0800 #define XCHAL_RESET_VECBASE_OVERLAP 0 #define XCHAL_RESET_VECTOR0_VADDR 0xBEFE0000 @@ -498,50 +500,50 @@ #define XCHAL_RESET_VECTOR1_PADDR 0xBE800000 #define XCHAL_RESET_VECTOR_VADDR 0xBEFE0000 #define XCHAL_RESET_VECTOR_PADDR 0xBEFE0000 -#define XCHAL_MEMERROR_VECTOR0_VADDR 0xbefe0270 -#define XCHAL_MEMERROR_VECTOR0_PADDR 0xbefe0270 +#define XCHAL_MEMERROR_VECTOR0_VADDR 0xBEFE0400 +#define XCHAL_MEMERROR_VECTOR0_PADDR 0xBEFE0400 #define XCHAL_MEMERROR_VECTOR1_VADDR 0xBE800400 #define XCHAL_MEMERROR_VECTOR1_PADDR 0xBE800400 -#define XCHAL_MEMERROR_VECTOR_VADDR 0xbefe0270 -#define XCHAL_MEMERROR_VECTOR_PADDR 0xbefe0270 +#define XCHAL_MEMERROR_VECTOR_VADDR 0xBEFE0400 +#define XCHAL_MEMERROR_VECTOR_PADDR 0xBEFE0400 #define XCHAL_USER_VECOFS 0x00000340 -#define XCHAL_USER_VECTOR_VADDR 0xa000a740 -#define XCHAL_USER_VECTOR_PADDR 0xa000a740 +#define XCHAL_USER_VECTOR_VADDR 0xBEFE0B40 +#define XCHAL_USER_VECTOR_PADDR 0xBEFE0B40 #define XCHAL_KERNEL_VECOFS 0x00000300 -#define XCHAL_KERNEL_VECTOR_VADDR 0xa000a700 -#define XCHAL_KERNEL_VECTOR_PADDR 0xa000a700 +#define XCHAL_KERNEL_VECTOR_VADDR 0xBEFE0B00 +#define XCHAL_KERNEL_VECTOR_PADDR 0xBEFE0B00 #define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 -#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xa000a7c0 -#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0xa000a7c0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xBEFE0BC0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0xBEFE0BC0 #define XCHAL_WINDOW_OF4_VECOFS 0x00000000 #define XCHAL_WINDOW_UF4_VECOFS 0x00000040 #define XCHAL_WINDOW_OF8_VECOFS 0x00000080 #define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 #define XCHAL_WINDOW_OF12_VECOFS 0x00000100 #define XCHAL_WINDOW_UF12_VECOFS 0x00000140 -#define XCHAL_WINDOW_VECTORS_VADDR 0xa000a400 -#define XCHAL_WINDOW_VECTORS_PADDR 0xa000a400 +#define XCHAL_WINDOW_VECTORS_VADDR 0xBEFE0800 +#define XCHAL_WINDOW_VECTORS_PADDR 0xBEFE0800 #define XCHAL_INTLEVEL2_VECOFS 0x00000180 -#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xa000a580 -#define XCHAL_INTLEVEL2_VECTOR_PADDR 0xa000a580 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xBEFE0980 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0xBEFE0980 #define XCHAL_INTLEVEL3_VECOFS 0x000001C0 -#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xa000a5c0 -#define XCHAL_INTLEVEL3_VECTOR_PADDR 0xa000a5c0 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xBEFE09C0 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0xBEFE09C0 #define XCHAL_INTLEVEL4_VECOFS 0x00000200 -#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xa000a600 -#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xa000a600 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xBEFE0A00 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xBEFE0A00 #define XCHAL_INTLEVEL5_VECOFS 0x00000240 -#define XCHAL_INTLEVEL5_VECTOR_VADDR 0xa000a640 -#define XCHAL_INTLEVEL5_VECTOR_PADDR 0xa000a640 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0xBEFE0A40 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0xBEFE0A40 #define XCHAL_INTLEVEL6_VECOFS 0x00000280 -#define XCHAL_INTLEVEL6_VECTOR_VADDR 0xa000a680 -#define XCHAL_INTLEVEL6_VECTOR_PADDR 0xa000a680 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0xBEFE0A80 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0xBEFE0A80 #define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS #define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR #define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR #define XCHAL_NMI_VECOFS 0x000002C0 -#define XCHAL_NMI_VECTOR_VADDR 0xa000a6c0 -#define XCHAL_NMI_VECTOR_PADDR 0xa000a6c0 +#define XCHAL_NMI_VECTOR_VADDR 0xBEFE0AC0 +#define XCHAL_NMI_VECTOR_PADDR 0xBEFE0AC0 #define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS #define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR #define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR @@ -600,3 +602,9 @@ #endif /* _XTENSA_CORE_CONFIGURATION_H */ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/cannonlake/include/xtensa/config/core-matmap.h b/src/platform/apollolake/include/arch/xtensa/config/core-matmap.h similarity index 99% rename from src/platform/cannonlake/include/xtensa/config/core-matmap.h rename to src/platform/apollolake/include/arch/xtensa/config/core-matmap.h index c4f479a..ad0f0d7 100644 --- a/src/platform/cannonlake/include/xtensa/config/core-matmap.h +++ b/src/platform/apollolake/include/arch/xtensa/config/core-matmap.h @@ -43,6 +43,7 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ #ifndef XTENSA_CONFIG_CORE_MATMAP_H #define XTENSA_CONFIG_CORE_MATMAP_H @@ -311,3 +312,9 @@ #endif /*XTENSA_CONFIG_CORE_MATMAP_H*/ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/cannonlake/include/xtensa/config/defs.h b/src/platform/apollolake/include/arch/xtensa/config/defs.h similarity index 94% rename from src/platform/cannonlake/include/xtensa/config/defs.h rename to src/platform/apollolake/include/arch/xtensa/config/defs.h index b695e59..c2ef1d9 100644 --- a/src/platform/cannonlake/include/xtensa/config/defs.h +++ b/src/platform/apollolake/include/arch/xtensa/config/defs.h @@ -25,6 +25,8 @@ and earlier Xtensa releases. It includes only a subset of the available header files. */ +#if !defined __XCC__ + #ifndef _XTENSA_BASE_HEADER #define _XTENSA_BASE_HEADER @@ -36,3 +38,9 @@ #endif /* __XTENSA__ */ #endif /* !_XTENSA_BASE_HEADER */ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/cannonlake/include/xtensa/config/specreg.h b/src/platform/apollolake/include/arch/xtensa/config/specreg.h similarity index 96% rename from src/platform/cannonlake/include/xtensa/config/specreg.h rename to src/platform/apollolake/include/arch/xtensa/config/specreg.h index 96bfa94..c99cda6 100644 --- a/src/platform/cannonlake/include/xtensa/config/specreg.h +++ b/src/platform/apollolake/include/arch/xtensa/config/specreg.h @@ -25,6 +25,8 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ + #ifndef XTENSA_SPECREG_H #define XTENSA_SPECREG_H @@ -104,3 +106,9 @@ #define INTCLEAR 227 #endif /* XTENSA_SPECREG_H */ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/apollolake/include/xtensa/config/system.h b/src/platform/apollolake/include/arch/xtensa/config/system.h similarity index 99% rename from src/platform/apollolake/include/xtensa/config/system.h rename to src/platform/apollolake/include/arch/xtensa/config/system.h index aad1d8c..f1fd8a0 100644 --- a/src/platform/apollolake/include/xtensa/config/system.h +++ b/src/platform/apollolake/include/arch/xtensa/config/system.h @@ -31,6 +31,7 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ #ifndef XTENSA_CONFIG_SYSTEM_H #define XTENSA_CONFIG_SYSTEM_H @@ -269,3 +270,9 @@ #endif /*XTENSA_CONFIG_SYSTEM_H*/ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/apollolake/include/xtensa/config/tie-asm.h b/src/platform/apollolake/include/arch/xtensa/config/tie-asm.h similarity index 99% rename from src/platform/apollolake/include/xtensa/config/tie-asm.h rename to src/platform/apollolake/include/arch/xtensa/config/tie-asm.h index 15f6e89..706545a 100644 --- a/src/platform/apollolake/include/xtensa/config/tie-asm.h +++ b/src/platform/apollolake/include/arch/xtensa/config/tie-asm.h @@ -29,6 +29,8 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ + #ifndef _XTENSA_CORE_TIE_ASM_H #define _XTENSA_CORE_TIE_ASM_H @@ -237,3 +239,9 @@ .macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm #endif /*_XTENSA_CORE_TIE_ASM_H*/ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/cannonlake/include/xtensa/config/tie.h b/src/platform/apollolake/include/arch/xtensa/config/tie.h similarity index 98% rename from src/platform/cannonlake/include/xtensa/config/tie.h rename to src/platform/apollolake/include/arch/xtensa/config/tie.h index d47e427..b5fd4c9 100644 --- a/src/platform/cannonlake/include/xtensa/config/tie.h +++ b/src/platform/apollolake/include/arch/xtensa/config/tie.h @@ -29,6 +29,8 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ + #ifndef _XTENSA_CORE_TIE_H #define _XTENSA_CORE_TIE_H @@ -167,3 +169,9 @@ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8 #endif /*_XTENSA_CORE_TIE_H*/ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/apollolake/include/platform/memory.h b/src/platform/apollolake/include/platform/memory.h index e7f3ee3..390b31b 100644 --- a/src/platform/apollolake/include/platform/memory.h +++ b/src/platform/apollolake/include/platform/memory.h @@ -127,29 +127,7 @@ #define ROM_BASE 0xBEFE0000 #define ROM_SIZE 0x00002000 -/* - * The L2 SRAM Heap and Stack on Apololake are organised like this :- - * - * +--------------------------------------------------------------------------+ - * | Offset | Region | Size | - * +---------------------+----------------+-----------------------------------+ - * | L2_SRAM_BASE | RO Data | SOF_DATA_SIZE | - * | | Data | | - * | | BSS | | - * +---------------------+----------------+-----------------------------------+ - * | HEAP_SYSTEM_BASE | System Heap | HEAP_SYSTEM_SIZE | - * +---------------------+----------------+-----------------------------------+ - * | HEAP_RUNTIME_BASE | Runtime Heap | HEAP_RUNTIME_SIZE | - * +---------------------+----------------+-----------------------------------+ - * | HEAP_BUFFER_BASE | Module Buffers | HEAP_BUFFER_SIZE | - * +---------------------+----------------+-----------------------------------+ - * | SOF_STACK_END | Stack | SOF_STACK_SIZE | - * +---------------------+----------------+-----------------------------------+ - * | SOF_STACK_BASE | | | - * +---------------------+----------------+-----------------------------------+ - */ - -/* L2 SRAM */ +/* IMR accessible via L2$ */ #define L2_SRAM_BASE 0xA000A000 #define L2_SRAM_SIZE 0x00056000 @@ -163,24 +141,8 @@ #define HEAP_RT_COUNT512 8 #define HEAP_RT_COUNT1024 4 -/* text and data share the same L2 SRAM on Broxton */ -#define SOF_TEXT_START L2_SRAM_BASE -#define SOF_TEXT_START_SIZE 0x400 #define L2_VECTOR_SIZE 0x1000 -#define SOF_TEXT_BASE (L2_SRAM_BASE + L2_VECTOR_SIZE) -#define SOF_TEXT_SIZE 0x19000 - -/* initialized data */ -#if defined CONFIG_DMIC -#define SOF_DATA_SIZE 0x1a000 -#else -#define SOF_DATA_SIZE 0x19000 -#endif - -/* bss data */ -#define SOF_BSS_DATA_SIZE 0x2800 - /* Heap configuration */ #define HEAP_SYSTEM_BASE \ (SOF_TEXT_BASE + SOF_TEXT_SIZE +\ @@ -203,11 +165,6 @@ #define HEAP_BUFFER_COUNT (HEAP_BUFFER_SIZE / HEAP_BUFFER_BLOCK_SIZE) -/* Stack configuration */ -#define SOF_STACK_SIZE 0x1000 -#define SOF_STACK_BASE (L2_SRAM_BASE + L2_SRAM_SIZE) -#define SOF_STACK_END (SOF_STACK_BASE - SOF_STACK_SIZE) - /* * The HP SRAM Region Apololake is organised like this :- * +--------------------------------------------------------------------------+ @@ -232,8 +189,17 @@ */ /* HP SRAM */ +#define SRAM_ALIAS_OFFSET 0x20000000 #define HP_SRAM_BASE 0xBE000000 -#define HP_SRAM_SIZE 0x00020000 +#define HP_SRAM_SIZE 0x00080000 + +/* HP SRAM Heap */ +#define HEAP_HP_BUFFER_BASE HP_SRAM_BASE +#define HEAP_HP_BUFFER_SIZE 0x8000 + +#define HEAP_HP_BUFFER_BLOCK_SIZE 0x180 +#define HEAP_HP_BUFFER_COUNT \ + (HEAP_HP_BUFFER_SIZE / HEAP_HP_BUFFER_BLOCK_SIZE) /* HP SRAM windows */ @@ -278,21 +244,27 @@ #define HP_SRAM_WIN3_BASE SRAM_TRACE_BASE #define HP_SRAM_WIN3_SIZE SRAM_TRACE_SIZE -/* HP SRAM Heap */ -#define HEAP_HP_BUFFER_BASE HP_SRAM_BASE -#define HEAP_HP_BUFFER_SIZE \ - (HP_SRAM_SIZE - \ - SRAM_TRACE_SIZE - \ - SRAM_DEBUG_SIZE - \ - SRAM_EXCEPT_SIZE - \ - SRAM_STREAM_SIZE - \ - SRAM_INBOX_SIZE - \ - SRAM_OUTBOX_SIZE - \ - SRAM_SW_REG_SIZE) +#define HP_SRAM_VECBASE_RESET (HP_SRAM_WIN0_BASE + HP_SRAM_WIN0_SIZE) -#define HEAP_HP_BUFFER_BLOCK_SIZE 0x180 -#define HEAP_HP_BUFFER_COUNT \ - (HEAP_HP_BUFFER_SIZE / HEAP_HP_BUFFER_BLOCK_SIZE) + +#define SOF_TEXT_START (HP_SRAM_VECBASE_RESET + 0x400) +#define SOF_TEXT_BASE (SOF_TEXT_START) +#define SOF_TEXT_SIZE (0x19000 - 0x400) + +/* initialized data */ +#if defined CONFIG_DMIC +#define SOF_DATA_SIZE 0x1b000 +#else +#define SOF_DATA_SIZE 0x19000 +#endif + +/* bss data */ +#define SOF_BSS_DATA_SIZE 0x2800 + +/* Stack configuration */ +#define SOF_STACK_SIZE 0x1000 +#define SOF_STACK_BASE (HP_SRAM_BASE + HP_SRAM_SIZE) +#define SOF_STACK_END (SOF_STACK_BASE - SOF_STACK_SIZE) /* * The LP SRAM Heap and Stack on Apollolake are organised like this :- @@ -369,9 +341,31 @@ #define SOF_MEM_ERROR_TEXT_SIZE 0x180 #define SOF_MEM_ERROR_LIT_SIZE 0x8 -#define SOF_MEM_RESET_TEXT_SIZE 0x268 -#define SOF_MEM_RESET_LIT_SIZE 0x8 +#define SOF_MEM_VECBASE HP_SRAM_VECBASE_RESET #define SOF_MEM_VECBASE_LIT_SIZE 0x178 #define SOF_MEM_RO_SIZE 0x8 + +/* boot loader in IMR */ +#define IMR_BOOT_LDR_TEXT_ENTRY_BASE 0xB000A000 +#define IMR_BOOT_LDR_TEXT_ENTRY_SIZE 0x66 +#define IMR_BOOT_LDR_LIT_BASE (IMR_BOOT_LDR_TEXT_ENTRY_BASE + \ + IMR_BOOT_LDR_TEXT_ENTRY_SIZE) +#define IMR_BOOT_LDR_LIT_SIZE 0x70 +#define IMR_BOOT_LDR_TEXT_BASE (IMR_BOOT_LDR_LIT_BASE + \ + IMR_BOOT_LDR_LIT_SIZE) +#define IMR_BOOT_LDR_TEXT_SIZE 0x1C00 +#define IMR_BOOT_LDR_TEXT1_BASE (IMR_BOOT_LDR_TEXT_BASE + IMR_BOOT_LDR_TEXT_SIZE) +#define IMR_BOOT_LDR_TEXT1_SIZE 0x2000 +#define IMR_BOOT_LDR_DATA_BASE 0xB0002000 +#define IMR_BOOT_LDR_DATA_SIZE 0x1000 +#define IMR_BOOT_LDR_BSS_BASE 0xB0100000 +#define IMR_BOOT_LDR_BSS_SIZE 0x10000 + +/** \brief Manifest base address in IMR - used by boot loader copy procedure. */ +#define IMR_BOOT_LDR_MANIFEST_BASE 0xB0004000 + +/** \brief Manifest size (seems unused). */ +#define IMR_BOOT_LDR_MANIFEST_SIZE 0x6000 + #endif diff --git a/src/platform/apollolake/include/platform/platcfg.h b/src/platform/apollolake/include/platform/platcfg.h new file mode 100644 index 0000000..0875db3 --- /dev/null +++ b/src/platform/apollolake/include/platform/platcfg.h @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2018, Intel Corporation + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the Intel Corporation nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * Author: Marcin Maka <marcin.maka(a)linux.intel.com> + */ + +#ifndef __PLATFORM_PLATCFG_H__ +#define __PLATFORM_PLATCFG_H__ + +#define PLATFORM_RESET_MHE_AT_BOOT 1 + +#define PLATFORM_DISABLE_L2CACHE_AT_BOOT 1 + +#endif diff --git a/src/platform/apollolake/include/platform/platform.h b/src/platform/apollolake/include/platform/platform.h index aefa9b2..6d51752 100644 --- a/src/platform/apollolake/include/platform/platform.h +++ b/src/platform/apollolake/include/platform/platform.h @@ -33,6 +33,7 @@ #ifndef __PLATFORM_PLATFORM_H__ #define __PLATFORM_PLATFORM_H__ +#include <platform/platcfg.h> #include <platform/shim.h> #include <platform/interrupt.h> #include <uapi/ipc.h> diff --git a/src/platform/apollolake/include/platform/shim.h b/src/platform/apollolake/include/platform/shim.h index daff826..92b6cf3 100644 --- a/src/platform/apollolake/include/platform/shim.h +++ b/src/platform/apollolake/include/platform/shim.h @@ -33,7 +33,10 @@ #define __PLATFORM_SHIM_H__ #include <platform/memory.h> + +#ifndef ASSEMBLY #include <stdint.h> +#endif /* DSP IPC for Host Registers */ #define IPC_DIPCT 0x00 @@ -146,9 +149,19 @@ #define SHIM_PWRSTS 0x92 #define SHIM_LPSCTL 0x94 +/* HP SRAM Power Gating */ +#define SHIM_HSPGCTL 0x80 +#define SHIM_HPGISTS 0xb0 + #define SHIM_LPSCTL_FDSPRUN (0X1 << 9) #define SHIM_LPSCTL_FDMARUN (0X1 << 8) +#define SHIM_L2_MECS (SHIM_BASE + 0xd0) + +#define SHIM_L2_CACHE_CTRL (SHIM_BASE + 0x500) +#define SHIM_L2_PREF_CFG (SHIM_BASE + 0x508) +#define SHIM_L2_CACHE_PREF (SHIM_BASE + 0x510) + /* host windows */ #define DMWBA(x) (HOST_WIN_BASE(x) + 0x0) @@ -157,6 +170,8 @@ #define DMWBA_ENABLE (1 << 0) #define DMWBA_READONLY (1 << 1) +#ifndef ASSEMBLY + static inline uint32_t shim_read(uint32_t reg) { return *((volatile uint32_t*)(SHIM_BASE + reg)); @@ -179,12 +194,14 @@ static inline void shim_write64(uint32_t reg, uint64_t val) static inline uint32_t sw_reg_read(uint32_t reg) { - return *((volatile uint32_t*)(SRAM_SW_REG_BASE + reg)); + return *((volatile uint32_t*)((SRAM_SW_REG_BASE - + SRAM_ALIAS_OFFSET) + reg)); } static inline void sw_reg_write(uint32_t reg, uint32_t val) { - *((volatile uint32_t*)(SRAM_SW_REG_BASE + reg)) = val; + *((volatile uint32_t*)((SRAM_SW_REG_BASE - + SRAM_ALIAS_OFFSET) + reg)) = val; } static inline uint32_t mn_reg_read(uint32_t reg) @@ -216,5 +233,6 @@ static inline void ipc_write(uint32_t reg, uint32_t val) { *((volatile uint32_t*)(IPC_HOST_BASE + reg)) = val; } +#endif #endif diff --git a/src/platform/baytrail/include/Makefile.am b/src/platform/baytrail/include/Makefile.am index 19f40eb..c5113a4 100644 --- a/src/platform/baytrail/include/Makefile.am +++ b/src/platform/baytrail/include/Makefile.am @@ -1 +1 @@ -SUBDIRS = platform xtensa +SUBDIRS = arch platform diff --git a/src/platform/baytrail/include/arch/Makefile.am b/src/platform/baytrail/include/arch/Makefile.am new file mode 100644 index 0000000..63616bf --- /dev/null +++ b/src/platform/baytrail/include/arch/Makefile.am @@ -0,0 +1 @@ +SUBDIRS = xtensa diff --git a/src/platform/baytrail/include/xtensa/Makefile.am b/src/platform/baytrail/include/arch/xtensa/Makefile.am similarity index 100% rename from src/platform/baytrail/include/xtensa/Makefile.am rename to src/platform/baytrail/include/arch/xtensa/Makefile.am diff --git a/src/platform/baytrail/include/xtensa/config/Makefile.am b/src/platform/baytrail/include/arch/xtensa/config/Makefile.am similarity index 100% rename from src/platform/baytrail/include/xtensa/config/Makefile.am rename to src/platform/baytrail/include/arch/xtensa/config/Makefile.am diff --git a/src/platform/baytrail/include/xtensa/config/core-isa-byt.h b/src/platform/baytrail/include/arch/xtensa/config/core-isa-byt.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/core-isa-byt.h rename to src/platform/baytrail/include/arch/xtensa/config/core-isa-byt.h diff --git a/src/platform/baytrail/include/xtensa/config/core-isa-cht.h b/src/platform/baytrail/include/arch/xtensa/config/core-isa-cht.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/core-isa-cht.h rename to src/platform/baytrail/include/arch/xtensa/config/core-isa-cht.h diff --git a/src/platform/baytrail/include/xtensa/config/core-isa.h b/src/platform/baytrail/include/arch/xtensa/config/core-isa.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/core-isa.h rename to src/platform/baytrail/include/arch/xtensa/config/core-isa.h diff --git a/src/platform/baytrail/include/xtensa/config/core-matmap.h b/src/platform/baytrail/include/arch/xtensa/config/core-matmap.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/core-matmap.h rename to src/platform/baytrail/include/arch/xtensa/config/core-matmap.h diff --git a/src/platform/apollolake/include/xtensa/config/defs.h b/src/platform/baytrail/include/arch/xtensa/config/defs.h similarity index 100% rename from src/platform/apollolake/include/xtensa/config/defs.h rename to src/platform/baytrail/include/arch/xtensa/config/defs.h diff --git a/src/platform/baytrail/include/xtensa/config/specreg.h b/src/platform/baytrail/include/arch/xtensa/config/specreg.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/specreg.h rename to src/platform/baytrail/include/arch/xtensa/config/specreg.h diff --git a/src/platform/baytrail/include/xtensa/config/system.h b/src/platform/baytrail/include/arch/xtensa/config/system.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/system.h rename to src/platform/baytrail/include/arch/xtensa/config/system.h diff --git a/src/platform/baytrail/include/xtensa/config/tie-asm.h b/src/platform/baytrail/include/arch/xtensa/config/tie-asm.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/tie-asm.h rename to src/platform/baytrail/include/arch/xtensa/config/tie-asm.h diff --git a/src/platform/baytrail/include/xtensa/config/tie.h b/src/platform/baytrail/include/arch/xtensa/config/tie.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/tie.h rename to src/platform/baytrail/include/arch/xtensa/config/tie.h diff --git a/src/platform/cannonlake/boot_ldr.x.in b/src/platform/cannonlake/boot_ldr.x.in index e15e631..a023f2e 100644 --- a/src/platform/cannonlake/boot_ldr.x.in +++ b/src/platform/cannonlake/boot_ldr.x.in @@ -8,7 +8,7 @@ */ #include <platform/memory.h> -#include <xtensa/config/core-isa-boot.h> +#include <xtensa/config/core-isa.h> OUTPUT_ARCH(xtensa) @@ -23,69 +23,18 @@ MEMORY sof_text : org = IMR_BOOT_LDR_TEXT_BASE, len = IMR_BOOT_LDR_TEXT_SIZE, - vector_base_text : - org = XCHAL_VECBASE_RESET_PADDR, - len = SOF_MEM_VECBASE_LIT_SIZE - vector_int2_lit : - org = XCHAL_INTLEVEL2_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_int2_text : - org = XCHAL_INTLEVEL2_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE - vector_int3_lit : - org = XCHAL_INTLEVEL3_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_int3_text : - org = XCHAL_INTLEVEL3_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE - vector_int4_lit : - org = XCHAL_INTLEVEL4_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_int4_text : - org = XCHAL_INTLEVEL4_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE - vector_int5_lit : - org = XCHAL_INTLEVEL5_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_int5_text : - org = XCHAL_INTLEVEL5_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE - vector_int6_lit : - org = XCHAL_INTLEVEL6_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_int6_text : - org = XCHAL_INTLEVEL6_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE - vector_int7_lit : - org = XCHAL_INTLEVEL7_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_int7_text : - org = XCHAL_INTLEVEL7_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE - vector_kernel_lit : - org = XCHAL_KERNEL_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_kernel_text : - org = XCHAL_KERNEL_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE - vector_user_lit : - org = XCHAL_USER_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_user_text : - org = XCHAL_USER_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE - vector_double_lit : - org = XCHAL_DOUBLEEXC_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, - len = SOF_MEM_VECT_LIT_SIZE - vector_double_text : - org = XCHAL_DOUBLEEXC_VECTOR_PADDR, - len = SOF_MEM_VECT_TEXT_SIZE sof_data : org = IMR_BOOT_LDR_DATA_BASE, len = IMR_BOOT_LDR_DATA_SIZE sof_bss_data : org = IMR_BOOT_LDR_BSS_BASE, len = IMR_BOOT_LDR_BSS_SIZE + sof_stack : + org = SOF_STACK_END, + len = SOF_STACK_BASE - SOF_STACK_END + wnd0 : + org = HP_SRAM_WIN0_BASE, + len = HP_SRAM_WIN0_SIZE } PHDRS @@ -93,27 +42,10 @@ PHDRS boot_entry_text_phdr PT_LOAD; boot_entry_lit_phdr PT_LOAD; sof_text_phdr PT_LOAD; - vector_base_text_phdr PT_LOAD; - vector_int2_lit_phdr PT_LOAD; - vector_int2_text_phdr PT_LOAD; - vector_int3_lit_phdr PT_LOAD; - vector_int3_text_phdr PT_LOAD; - vector_int4_lit_phdr PT_LOAD; - vector_int4_text_phdr PT_LOAD; - vector_int5_lit_phdr PT_LOAD; - vector_int5_text_phdr PT_LOAD; - vector_int6_lit_phdr PT_LOAD; - vector_int6_text_phdr PT_LOAD; - vector_int7_lit_phdr PT_LOAD; - vector_int7_text_phdr PT_LOAD; - vector_kernel_lit_phdr PT_LOAD; - vector_kernel_text_phdr PT_LOAD; - vector_user_lit_phdr PT_LOAD; - vector_user_text_phdr PT_LOAD; - vector_double_lit_phdr PT_LOAD; - vector_double_text_phdr PT_LOAD; sof_data_phdr PT_LOAD; sof_bss_data_phdr PT_LOAD; + sof_stack_phdr PT_LOAD; + wnd0_phdr PT_LOAD; } /* Default entry point: */ @@ -150,144 +82,10 @@ SECTIONS *(.gnu.version) KEEP (*(.ResetVector.text)) KEEP (*(.ResetHandler.text)) - KEEP (*(.MemoryExceptionVector.text)) _text_end = ABSOLUTE(.); _etext = .; } >sof_text :sof_text_phdr - .WindowVectors.text : ALIGN(4) - { - _WindowVectors_text_start = ABSOLUTE(.); - KEEP (*(.WindowVectors.text)) - _WindowVectors_text_end = ABSOLUTE(.); - } >vector_base_text :vector_base_text_phdr - - .Level2InterruptVector.literal : ALIGN(4) - { - _Level2InterruptVector_literal_start = ABSOLUTE(.); - *(.Level2InterruptVector.literal) - _Level2InterruptVector_literal_end = ABSOLUTE(.); - } >vector_int2_lit :vector_int2_lit_phdr - - .Level2InterruptVector.text : ALIGN(4) - { - _Level2InterruptVector_text_start = ABSOLUTE(.); - KEEP (*(.Level2InterruptVector.text)) - _Level2InterruptVector_text_end = ABSOLUTE(.); - } >vector_int2_text :vector_int2_text_phdr - - .Level3InterruptVector.literal : ALIGN(4) - { - _Level3InterruptVector_literal_start = ABSOLUTE(.); - *(.Level3InterruptVector.literal) - _Level3InterruptVector_literal_end = ABSOLUTE(.); - } >vector_int3_lit :vector_int3_lit_phdr - - .Level3InterruptVector.text : ALIGN(4) - { - _Level3InterruptVector_text_start = ABSOLUTE(.); - KEEP (*(.Level3InterruptVector.text)) - _Level3InterruptVector_text_end = ABSOLUTE(.); - } >vector_int3_text :vector_int3_text_phdr - - .Level4InterruptVector.literal : ALIGN(4) - { - _Level4InterruptVector_literal_start = ABSOLUTE(.); - *(.Level4InterruptVector.literal) - _Level4InterruptVector_literal_end = ABSOLUTE(.); - } >vector_int4_lit :vector_int4_lit_phdr - - .Level4InterruptVector.text : ALIGN(4) - { - _Level4InterruptVector_text_start = ABSOLUTE(.); - KEEP (*(.Level4InterruptVector.text)) - _Level4InterruptVector_text_end = ABSOLUTE(.); - } >vector_int4_text :vector_int4_text_phdr - - .Level5InterruptVector.literal : ALIGN(4) - { - _Level5InterruptVector_literal_start = ABSOLUTE(.); - *(.Level5InterruptVector.literal) - _Level5InterruptVector_literal_end = ABSOLUTE(.); - } >vector_int5_lit :vector_int5_lit_phdr - - .Level5InterruptVector.text : ALIGN(4) - { - _Level5InterruptVector_text_start = ABSOLUTE(.); - KEEP (*(.Level5InterruptVector.text)) - _Level5InterruptVector_text_end = ABSOLUTE(.); - } >vector_int5_text :vector_int5_text_phdr - - .DebugExceptionVector.literal : ALIGN(4) - { - _DebugExceptionVector_literal_start = ABSOLUTE(.); - *(.DebugExceptionVector.literal) - _DebugExceptionVector_literal_end = ABSOLUTE(.); - } >vector_int6_lit :vector_int6_lit_phdr - - .DebugExceptionVector.text : ALIGN(4) - { - _DebugExceptionVector_text_start = ABSOLUTE(.); - KEEP (*(.DebugExceptionVector.text)) - _DebugExceptionVector_text_end = ABSOLUTE(.); - } >vector_int6_text :vector_int6_text_phdr - - .NMIExceptionVector.literal : ALIGN(4) - { - _NMIExceptionVector_literal_start = ABSOLUTE(.); - *(.NMIExceptionVector.literal) - _NMIExceptionVector_literal_end = ABSOLUTE(.); - } >vector_int7_lit :vector_int7_lit_phdr - - .NMIExceptionVector.text : ALIGN(4) - { - _NMIExceptionVector_text_start = ABSOLUTE(.); - KEEP (*(.NMIExceptionVector.text)) - _NMIExceptionVector_text_end = ABSOLUTE(.); - } >vector_int7_text :vector_int7_text_phdr - - .KernelExceptionVector.literal : ALIGN(4) - { - _KernelExceptionVector_literal_start = ABSOLUTE(.); - *(.KernelExceptionVector.literal) - _KernelExceptionVector_literal_end = ABSOLUTE(.); - } >vector_kernel_lit :vector_kernel_lit_phdr - - .KernelExceptionVector.text : ALIGN(4) - { - _KernelExceptionVector_text_start = ABSOLUTE(.); - KEEP (*(.KernelExceptionVector.text)) - _KernelExceptionVector_text_end = ABSOLUTE(.); - } >vector_kernel_text :vector_kernel_text_phdr - - .UserExceptionVector.literal : ALIGN(4) - { - _UserExceptionVector_literal_start = ABSOLUTE(.); - *(.UserExceptionVector.literal) - _UserExceptionVector_literal_end = ABSOLUTE(.); - } >vector_user_lit :vector_user_lit_phdr - - .UserExceptionVector.text : ALIGN(4) - { - _UserExceptionVector_text_start = ABSOLUTE(.); - KEEP (*(.UserExceptionVector.text)) - _UserExceptionVector_text_end = ABSOLUTE(.); - } >vector_user_text :vector_user_text_phdr - - .DoubleExceptionVector.literal : ALIGN(4) - { - _DoubleExceptionVector_literal_start = ABSOLUTE(.); - *(.DoubleExceptionVector.literal) - _DoubleExceptionVector_literal_end = ABSOLUTE(.); - } >vector_double_lit :vector_double_lit_phdr - - .DoubleExceptionVector.text : ALIGN(4) - { - _DoubleExceptionVector_text_start = ABSOLUTE(.); - KEEP (*(.DoubleExceptionVector.text)) - _DoubleExceptionVector_text_end = ABSOLUTE(.); - } >vector_double_text :vector_double_text_phdr - .rodata : ALIGN(4) { _rodata_start = ABSOLUTE(.); @@ -381,6 +179,10 @@ SECTIONS _memmap_cacheattr_wbna_trapnull = 0xFF42FFF2; PROVIDE(_memmap_cacheattr_reset = _memmap_cacheattr_wbna_trapnull); + __stack = SOF_STACK_BASE; + __wnd0 = HP_SRAM_WIN0_BASE; + __wnd0_size = HP_SRAM_WIN0_SIZE; + .debug 0 : { *(.debug) } .line 0 : { *(.line) } .debug_srcinfo 0 : { *(.debug_srcinfo) } diff --git a/src/platform/cannonlake/cannonlake.x.in b/src/platform/cannonlake/cannonlake.x.in index 052d637..06f745b 100644 --- a/src/platform/cannonlake/cannonlake.x.in +++ b/src/platform/cannonlake/cannonlake.x.in @@ -14,12 +14,6 @@ OUTPUT_ARCH(xtensa) MEMORY { - vector_reset_text : - org = XCHAL_RESET_VECTOR0_PADDR, - len = SOF_MEM_RESET_TEXT_SIZE - vector_reset_lit : - org = XCHAL_RESET_VECTOR0_PADDR + SOF_MEM_RESET_TEXT_SIZE, - len = SOF_MEM_RESET_LIT_SIZE vector_memory_lit : org = XCHAL_MEMERROR_VECTOR_PADDR + SOF_MEM_ERROR_LIT_SIZE, len = SOF_MEM_ERROR_LIT_SIZE @@ -27,65 +21,62 @@ MEMORY org = XCHAL_MEMERROR_VECTOR_PADDR, len = SOF_MEM_ERROR_TEXT_SIZE vector_base_text : - org = XCHAL_VECBASE_RESET_PADDR, + org = SOF_MEM_VECBASE, len = SOF_MEM_VECBASE_LIT_SIZE vector_int2_lit : - org = XCHAL_INTLEVEL2_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL2_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int2_text : - org = XCHAL_INTLEVEL2_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL2_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int3_lit : - org = XCHAL_INTLEVEL3_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL3_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int3_text : - org = XCHAL_INTLEVEL3_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL3_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int4_lit : - org = XCHAL_INTLEVEL4_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL4_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int4_text : - org = XCHAL_INTLEVEL4_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL4_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int5_lit : - org = XCHAL_INTLEVEL5_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL5_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int5_text : - org = XCHAL_INTLEVEL5_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL5_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int6_lit : - org = XCHAL_INTLEVEL6_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL6_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int6_text : - org = XCHAL_INTLEVEL6_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL6_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_int7_lit : - org = XCHAL_INTLEVEL7_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL7_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_int7_text : - org = XCHAL_INTLEVEL7_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_INTLEVEL7_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_kernel_lit : - org = XCHAL_KERNEL_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_KERNEL_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_kernel_text : - org = XCHAL_KERNEL_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_KERNEL_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_user_lit : - org = XCHAL_USER_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_USER_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_user_text : - org = XCHAL_USER_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_USER_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE vector_double_lit : - org = XCHAL_DOUBLEEXC_VECTOR_PADDR - SOF_MEM_VECT_LIT_SIZE, + org = SOF_MEM_VECBASE + XCHAL_DOUBLEEXC_VECOFS - SOF_MEM_VECT_LIT_SIZE, len = SOF_MEM_VECT_LIT_SIZE vector_double_text : - org = XCHAL_DOUBLEEXC_VECTOR_PADDR, + org = SOF_MEM_VECBASE + XCHAL_DOUBLEEXC_VECOFS, len = SOF_MEM_VECT_TEXT_SIZE - sof_text_start : - org = SOF_TEXT_START, - len = SOF_TEXT_START_SIZE, sof_text : org = SOF_TEXT_BASE, len = SOF_TEXT_SIZE, @@ -111,8 +102,6 @@ MEMORY PHDRS { - vector_reset_text_phdr PT_LOAD; - vector_reset_lit_phdr PT_LOAD; vector_memory_lit_phdr PT_LOAD; vector_memory_text_phdr PT_LOAD; vector_base_text_phdr PT_LOAD; @@ -134,7 +123,6 @@ PHDRS vector_user_text_phdr PT_LOAD; vector_double_lit_phdr PT_LOAD; vector_double_text_phdr PT_LOAD; - sof_text_start_phdr PT_LOAD; sof_text_phdr PT_LOAD; sof_data_phdr PT_LOAD; sof_bss_data_phdr PT_LOAD; @@ -171,27 +159,6 @@ PROVIDE(_memmap_cacheattr_reset = _memmap_cacheattr_wbna_trapnull); SECTIONS { - .ResetVector.text : ALIGN(4) - { - _ResetVector_text_start = ABSOLUTE(.); - KEEP (*(.ResetVector.text)) - _ResetVector_text_end = ABSOLUTE(.); - } >vector_reset_text :vector_reset_text_phdr - - .ResetVector.literal : ALIGN(4) - { - _ResetVector_literal_start = ABSOLUTE(.); - *(.ResetVector.literal) - _ResetVector_literal_end = ABSOLUTE(.); - } >vector_reset_lit :vector_reset_lit_phdr - - .MemoryExceptionVector.literal : ALIGN(4) - { - _MemoryExceptionVector_literal_start = ABSOLUTE(.); - KEEP (*(.MemoryExceptionVector.literal)) - _MemoryExceptionVector_literal_end = ABSOLUTE(.); - } >vector_memory_lit :vector_memory_lit_phdr - .MemoryExceptionVector.text : ALIGN(4) { _MemoryExceptionVector_text_start = ABSOLUTE(.); @@ -199,7 +166,7 @@ SECTIONS _MemoryExceptionVector_text_end = ABSOLUTE(.); } >vector_memory_text :vector_memory_text_phdr - .WindowVectors.text : ALIGN(4) + .WindowVectors.text : ALIGN(4) { _WindowVectors_text_start = ABSOLUTE(.); KEEP (*(.WindowVectors.text)) @@ -332,17 +299,11 @@ SECTIONS _DoubleExceptionVector_text_end = ABSOLUTE(.); } >vector_double_text :vector_double_text_phdr - .MainEntry.text : ALIGN(4) - { - _MainEntry_text_start = ABSOLUTE(.); - KEEP (*(.MainEntry.text)) - _MainEntry_text_end = ABSOLUTE(.); - } >sof_text_start :sof_text_start_phdr - .text : ALIGN(4) { _stext = .; _text_start = ABSOLUTE(.); + KEEP (*(.MainEntry.text)) *(.entry.text) *(.init.literal) KEEP(*(.init)) diff --git a/src/platform/cannonlake/include/Makefile.am b/src/platform/cannonlake/include/Makefile.am index 19f40eb..c5113a4 100644 --- a/src/platform/cannonlake/include/Makefile.am +++ b/src/platform/cannonlake/include/Makefile.am @@ -1 +1 @@ -SUBDIRS = platform xtensa +SUBDIRS = arch platform diff --git a/src/platform/cannonlake/include/arch/Makefile.am b/src/platform/cannonlake/include/arch/Makefile.am new file mode 100644 index 0000000..63616bf --- /dev/null +++ b/src/platform/cannonlake/include/arch/Makefile.am @@ -0,0 +1 @@ +SUBDIRS = xtensa diff --git a/src/platform/cannonlake/include/xtensa/Makefile.am b/src/platform/cannonlake/include/arch/xtensa/Makefile.am similarity index 100% rename from src/platform/cannonlake/include/xtensa/Makefile.am rename to src/platform/cannonlake/include/arch/xtensa/Makefile.am diff --git a/src/platform/cannonlake/include/xtensa/config/Makefile.am b/src/platform/cannonlake/include/arch/xtensa/config/Makefile.am similarity index 84% rename from src/platform/cannonlake/include/xtensa/config/Makefile.am rename to src/platform/cannonlake/include/arch/xtensa/config/Makefile.am index bfca58b..99c21a5 100644 --- a/src/platform/cannonlake/include/xtensa/config/Makefile.am +++ b/src/platform/cannonlake/include/arch/xtensa/config/Makefile.am @@ -5,5 +5,4 @@ noinst_HEADERS = \ specreg.h \ system.h \ tie.h \ - core-isa-boot.h \ tie-asm.h diff --git a/src/platform/cannonlake/include/xtensa/config/core-isa-boot.h b/src/platform/cannonlake/include/arch/xtensa/config/core-isa.h similarity index 95% rename from src/platform/cannonlake/include/xtensa/config/core-isa-boot.h rename to src/platform/cannonlake/include/arch/xtensa/config/core-isa.h index 186643b..8a02768 100644 --- a/src/platform/cannonlake/include/xtensa/config/core-isa-boot.h +++ b/src/platform/cannonlake/include/arch/xtensa/config/core-isa.h @@ -28,8 +28,10 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ -#ifndef _XTENSA_CORE_BOOT_CONFIGURATION_H -#define _XTENSA_CORE_BOOT_CONFIGURATION_H +#if !defined __XCC__ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H /**************************************************************************** @@ -439,12 +441,12 @@ #define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ #define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ #define XCHAL_HAVE_HALT 0 /* halt architecture option */ -#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ +#define XCHAL_HAVE_BOOTLOADER 1 /* boot loader (for TX) */ #define XCHAL_HAVE_MEM_ECC_PARITY 1 /* local memory ECC/parity */ #define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ #define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ -#define XCHAL_VECBASE_RESET_VADDR 0xB003A000 /* VECBASE reset value */ -#define XCHAL_VECBASE_RESET_PADDR 0xB003A000 +#define XCHAL_VECBASE_RESET_VADDR 0xBEFE0800 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0xBEFE0800 #define XCHAL_RESET_VECBASE_OVERLAP 0 #define XCHAL_RESET_VECTOR0_VADDR 0xBEFE0000 @@ -460,43 +462,43 @@ #define XCHAL_MEMERROR_VECTOR_VADDR 0xBEFE0400 #define XCHAL_MEMERROR_VECTOR_PADDR 0xBEFE0400 #define XCHAL_USER_VECOFS 0x00000340 -#define XCHAL_USER_VECTOR_VADDR 0xB003A340 -#define XCHAL_USER_VECTOR_PADDR 0xB003A340 +#define XCHAL_USER_VECTOR_VADDR 0xBEFE0B40 +#define XCHAL_USER_VECTOR_PADDR 0xBEFE0B40 #define XCHAL_KERNEL_VECOFS 0x00000300 -#define XCHAL_KERNEL_VECTOR_VADDR 0xB003A300 -#define XCHAL_KERNEL_VECTOR_PADDR 0xB003A300 +#define XCHAL_KERNEL_VECTOR_VADDR 0xBEFE0B00 +#define XCHAL_KERNEL_VECTOR_PADDR 0xBEFE0B00 #define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 -#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xB003A3C0 -#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0xB003A3C0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xBEFE0BC0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0xBEFE0BC0 #define XCHAL_WINDOW_OF4_VECOFS 0x00000000 #define XCHAL_WINDOW_UF4_VECOFS 0x00000040 #define XCHAL_WINDOW_OF8_VECOFS 0x00000080 #define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 #define XCHAL_WINDOW_OF12_VECOFS 0x00000100 #define XCHAL_WINDOW_UF12_VECOFS 0x00000140 -#define XCHAL_WINDOW_VECTORS_VADDR 0xB003A000 -#define XCHAL_WINDOW_VECTORS_PADDR 0xB003A000 +#define XCHAL_WINDOW_VECTORS_VADDR 0xBEFE0800 +#define XCHAL_WINDOW_VECTORS_PADDR 0xBEFE0800 #define XCHAL_INTLEVEL2_VECOFS 0x00000180 -#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xB003A180 -#define XCHAL_INTLEVEL2_VECTOR_PADDR 0xB003A180 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xBEFE0980 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0xBEFE0980 #define XCHAL_INTLEVEL3_VECOFS 0x000001C0 -#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xB003A1C0 -#define XCHAL_INTLEVEL3_VECTOR_PADDR 0xB003A1C0 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xBEFE09C0 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0xBEFE09C0 #define XCHAL_INTLEVEL4_VECOFS 0x00000200 -#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xB003A200 -#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xB003A200 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xBEFE0A00 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xBEFE0A00 #define XCHAL_INTLEVEL5_VECOFS 0x00000240 -#define XCHAL_INTLEVEL5_VECTOR_VADDR 0xB003A240 -#define XCHAL_INTLEVEL5_VECTOR_PADDR 0xB003A240 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0xBEFE0A40 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0xBEFE0A40 #define XCHAL_INTLEVEL6_VECOFS 0x00000280 -#define XCHAL_INTLEVEL6_VECTOR_VADDR 0xB003A280 -#define XCHAL_INTLEVEL6_VECTOR_PADDR 0xB003A280 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0xBEFE0A80 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0xBEFE0A80 #define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS #define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR #define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR #define XCHAL_NMI_VECOFS 0x000002C0 -#define XCHAL_NMI_VECTOR_VADDR 0xB003A2C0 -#define XCHAL_NMI_VECTOR_PADDR 0xB003A2C0 +#define XCHAL_NMI_VECTOR_VADDR 0xBEFE0AC0 +#define XCHAL_NMI_VECTOR_PADDR 0xBEFE0AC0 #define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS #define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR #define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR @@ -555,3 +557,9 @@ #endif /* _XTENSA_CORE_CONFIGURATION_H */ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/apollolake/include/xtensa/config/core-matmap.h b/src/platform/cannonlake/include/arch/xtensa/config/core-matmap.h similarity index 99% rename from src/platform/apollolake/include/xtensa/config/core-matmap.h rename to src/platform/cannonlake/include/arch/xtensa/config/core-matmap.h index c4f479a..ad0f0d7 100644 --- a/src/platform/apollolake/include/xtensa/config/core-matmap.h +++ b/src/platform/cannonlake/include/arch/xtensa/config/core-matmap.h @@ -43,6 +43,7 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ #ifndef XTENSA_CONFIG_CORE_MATMAP_H #define XTENSA_CONFIG_CORE_MATMAP_H @@ -311,3 +312,9 @@ #endif /*XTENSA_CONFIG_CORE_MATMAP_H*/ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/haswell/include/xtensa/config/defs.h b/src/platform/cannonlake/include/arch/xtensa/config/defs.h similarity index 94% rename from src/platform/haswell/include/xtensa/config/defs.h rename to src/platform/cannonlake/include/arch/xtensa/config/defs.h index b695e59..c2ef1d9 100644 --- a/src/platform/haswell/include/xtensa/config/defs.h +++ b/src/platform/cannonlake/include/arch/xtensa/config/defs.h @@ -25,6 +25,8 @@ and earlier Xtensa releases. It includes only a subset of the available header files. */ +#if !defined __XCC__ + #ifndef _XTENSA_BASE_HEADER #define _XTENSA_BASE_HEADER @@ -36,3 +38,9 @@ #endif /* __XTENSA__ */ #endif /* !_XTENSA_BASE_HEADER */ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/apollolake/include/xtensa/config/specreg.h b/src/platform/cannonlake/include/arch/xtensa/config/specreg.h similarity index 96% rename from src/platform/apollolake/include/xtensa/config/specreg.h rename to src/platform/cannonlake/include/arch/xtensa/config/specreg.h index 96bfa94..c99cda6 100644 --- a/src/platform/apollolake/include/xtensa/config/specreg.h +++ b/src/platform/cannonlake/include/arch/xtensa/config/specreg.h @@ -25,6 +25,8 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ + #ifndef XTENSA_SPECREG_H #define XTENSA_SPECREG_H @@ -104,3 +106,9 @@ #define INTCLEAR 227 #endif /* XTENSA_SPECREG_H */ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/cannonlake/include/xtensa/config/system.h b/src/platform/cannonlake/include/arch/xtensa/config/system.h similarity index 99% rename from src/platform/cannonlake/include/xtensa/config/system.h rename to src/platform/cannonlake/include/arch/xtensa/config/system.h index aad1d8c..f1fd8a0 100644 --- a/src/platform/cannonlake/include/xtensa/config/system.h +++ b/src/platform/cannonlake/include/arch/xtensa/config/system.h @@ -31,6 +31,7 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ #ifndef XTENSA_CONFIG_SYSTEM_H #define XTENSA_CONFIG_SYSTEM_H @@ -269,3 +270,9 @@ #endif /*XTENSA_CONFIG_SYSTEM_H*/ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/cannonlake/include/xtensa/config/tie-asm.h b/src/platform/cannonlake/include/arch/xtensa/config/tie-asm.h similarity index 99% rename from src/platform/cannonlake/include/xtensa/config/tie-asm.h rename to src/platform/cannonlake/include/arch/xtensa/config/tie-asm.h index 15f6e89..706545a 100644 --- a/src/platform/cannonlake/include/xtensa/config/tie-asm.h +++ b/src/platform/cannonlake/include/arch/xtensa/config/tie-asm.h @@ -29,6 +29,8 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ + #ifndef _XTENSA_CORE_TIE_ASM_H #define _XTENSA_CORE_TIE_ASM_H @@ -237,3 +239,9 @@ .macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm #endif /*_XTENSA_CORE_TIE_ASM_H*/ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/apollolake/include/xtensa/config/tie.h b/src/platform/cannonlake/include/arch/xtensa/config/tie.h similarity index 98% rename from src/platform/apollolake/include/xtensa/config/tie.h rename to src/platform/cannonlake/include/arch/xtensa/config/tie.h index d47e427..b5fd4c9 100644 --- a/src/platform/apollolake/include/xtensa/config/tie.h +++ b/src/platform/cannonlake/include/arch/xtensa/config/tie.h @@ -29,6 +29,8 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +#if !defined __XCC__ + #ifndef _XTENSA_CORE_TIE_H #define _XTENSA_CORE_TIE_H @@ -167,3 +169,9 @@ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8 #endif /*_XTENSA_CORE_TIE_H*/ + +#else + +#error "xcc should not use this header" + +#endif /* __XCC__ */ diff --git a/src/platform/cannonlake/include/platform/memory.h b/src/platform/cannonlake/include/platform/memory.h index 244dd25..85e7996 100644 --- a/src/platform/cannonlake/include/platform/memory.h +++ b/src/platform/cannonlake/include/platform/memory.h @@ -127,12 +127,6 @@ #define ROM_BASE 0xBEFE0000 #define ROM_SIZE 0x00002000 -#define TEXT_BASE 0xb0039000 -#define TEXT_LENGTH 0xB000 -#define DATA_BASE 0xb0044000 -#define DATA_LENGTH 0x4000 - - /* * The HP SRAM Region on Cannonlake is organised like this :- * +--------------------------------------------------------------------------+ @@ -167,6 +161,7 @@ */ /* HP SRAM */ +#define SRAM_ALIAS_OFFSET 0x20000000 #define HP_SRAM_BASE 0xBE000000 #define HP_SRAM_SIZE 0x002F0000 @@ -183,9 +178,6 @@ #define HEAP_RT_COUNT512 8 #define HEAP_RT_COUNT1024 4 -/* text and data share the same L2 SRAM on Cannonlake */ -#define SOF_TEXT_START 0xBE040400 -#define SOF_TEXT_START_SIZE 0x40 #define L2_VECTOR_SIZE 0x1000 /* HP SRAM windows */ @@ -236,8 +228,10 @@ #define HEAP_HP_BUFFER_COUNT \ (HEAP_HP_BUFFER_SIZE / HEAP_HP_BUFFER_BLOCK_SIZE) -#define SOF_TEXT_BASE (SOF_TEXT_START + SOF_TEXT_START_SIZE) -#define SOF_TEXT_SIZE 0x18000 +/* text and data share the same HP L2 SRAM on Cannonlake */ +#define SOF_TEXT_START 0xBE040400 +#define SOF_TEXT_BASE (SOF_TEXT_START) +#define SOF_TEXT_SIZE (0x18000 - 0x400) /* initialized data */ #if defined CONFIG_DMIC @@ -339,7 +333,8 @@ #define SOF_LP_STACK_END (SOF_LP_STACK_BASE - SOF_LP_STACK_SIZE) -/* Vector and literal sizes - not in core-isa.h */ +/* Vector and literal sizes - do not use core-isa.h */ +#define SOF_MEM_VECBASE HP_SRAM_VECBASE_RESET #define SOF_MEM_VECT_LIT_SIZE 0x8 #define SOF_MEM_VECT_TEXT_SIZE 0x38 #define SOF_MEM_VECT_SIZE (SOF_MEM_VECT_TEXT_SIZE + SOF_MEM_VECT_LIT_SIZE) @@ -354,19 +349,18 @@ #define SOF_MEM_RO_SIZE 0x8 /* boot loader in IMR */ +#define IMR_BOOT_LDR_MANIFEST_BASE 0xB0032000 +#define IMR_BOOT_LDR_MANIFEST_SIZE 0x6000 + #define IMR_BOOT_LDR_TEXT_ENTRY_BASE 0xB0038000 -#define IMR_BOOT_LDR_TEXT_ENTRY_SIZE 0x40 +#define IMR_BOOT_LDR_TEXT_ENTRY_SIZE 0x66 #define IMR_BOOT_LDR_LIT_BASE (IMR_BOOT_LDR_TEXT_ENTRY_BASE + IMR_BOOT_LDR_TEXT_ENTRY_SIZE) -#define IMR_BOOT_LDR_LIT_SIZE 0x70 +#define IMR_BOOT_LDR_LIT_SIZE 0x20 #define IMR_BOOT_LDR_TEXT_BASE (IMR_BOOT_LDR_LIT_BASE + IMR_BOOT_LDR_LIT_SIZE) #define IMR_BOOT_LDR_TEXT_SIZE 0x1C00 -#define IMR_BOOT_LDR_TEXT1_BASE (IMR_BOOT_LDR_TEXT_BASE + IMR_BOOT_LDR_TEXT_SIZE) -#define IMR_BOOT_LDR_TEXT1_SIZE 0x2000 -#define IMR_BOOT_LDR_DATA_BASE 0xB0002000 +#define IMR_BOOT_LDR_DATA_BASE 0xB0039000 #define IMR_BOOT_LDR_DATA_SIZE 0x1000 #define IMR_BOOT_LDR_BSS_BASE 0xB0100000 #define IMR_BOOT_LDR_BSS_SIZE 0x10000 -#define IMR_BOOT_LDR_MANIFEST_BASE 0xB0032000 -#define IMR_BOOT_LDR_MANIFEST_SIZE 0x6000 #endif diff --git a/src/platform/cannonlake/include/platform/platcfg.h b/src/platform/cannonlake/include/platform/platcfg.h new file mode 100644 index 0000000..f51ee4f --- /dev/null +++ b/src/platform/cannonlake/include/platform/platcfg.h @@ -0,0 +1,36 @@ +/* + * Copyright (c) 2018, Intel Corporation + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the Intel Corporation nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * Author: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> + */ + +#ifndef __PLATFORM_PLATCFG_H__ +#define __PLATFORM_PLATCFG_H__ + +#define PLATFORM_RESET_MHE_AT_BOOT 1 + +#endif diff --git a/src/platform/cannonlake/include/platform/platform.h b/src/platform/cannonlake/include/platform/platform.h index 35219d7..88614ab 100644 --- a/src/platform/cannonlake/include/platform/platform.h +++ b/src/platform/cannonlake/include/platform/platform.h @@ -34,6 +34,7 @@ #ifndef __PLATFORM_PLATFORM_H__ #define __PLATFORM_PLATFORM_H__ +#include <platform/platcfg.h> #include <platform/shim.h> #include <platform/interrupt.h> #include <uapi/ipc.h> diff --git a/src/platform/cannonlake/include/platform/shim.h b/src/platform/cannonlake/include/platform/shim.h index 6654335..82281f8 100644 --- a/src/platform/cannonlake/include/platform/shim.h +++ b/src/platform/cannonlake/include/platform/shim.h @@ -232,12 +232,14 @@ static inline void shim_write64(uint32_t reg, uint64_t val) static inline uint32_t sw_reg_read(uint32_t reg) { - return *((volatile uint32_t*)(SRAM_SW_REG_BASE + reg)); + return *((volatile uint32_t*)((SRAM_SW_REG_BASE - + SRAM_ALIAS_OFFSET) + reg)); } static inline void sw_reg_write(uint32_t reg, uint32_t val) { - *((volatile uint32_t*)(SRAM_SW_REG_BASE + reg)) = val; + *((volatile uint32_t*)((SRAM_SW_REG_BASE - + SRAM_ALIAS_OFFSET) + reg)) = val; } static inline uint32_t mn_reg_read(uint32_t reg) diff --git a/src/platform/cannonlake/include/xtensa/config/core-isa.h b/src/platform/cannonlake/include/xtensa/config/core-isa.h deleted file mode 100644 index bfad40c..0000000 --- a/src/platform/cannonlake/include/xtensa/config/core-isa.h +++ /dev/null @@ -1,557 +0,0 @@ -/* - * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa - * processor CORE configuration - * - * See <xtensa/config/core.h>, which includes this file, for more details. - */ - -/* Xtensa processor core configuration information. - - Customer ID=10631; Build=0x60f88; Copyright (c) 1999-2016 Tensilica Inc. - - Permission is hereby granted, free of charge, to any person obtaining - a copy of this software and associated documentation files (the - "Software"), to deal in the Software without restriction, including - without limitation the rights to use, copy, modify, merge, publish, - distribute, sublicense, and/or sell copies of the Software, and to - permit persons to whom the Software is furnished to do so, subject to - the following conditions: - - The above copyright notice and this permission notice shall be included - in all copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ - -#ifndef _XTENSA_CORE_CONFIGURATION_H -#define _XTENSA_CORE_CONFIGURATION_H - - -/**************************************************************************** - Parameters Useful for Any Code, USER or PRIVILEGED - ****************************************************************************/ - -/* - * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is - * configured, and a value of 0 otherwise. These macros are always defined. - */ - - -/*---------------------------------------------------------------------- - ISA - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ -#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ -#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */ -#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ -#define XCHAL_MAX_INSTRUCTION_SIZE 8 /* max instr bytes (3..8) */ -#define XCHAL_HAVE_DEBUG 1 /* debug option */ -#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ -#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ -#define XCHAL_LOOP_BUFFER_SIZE 64 /* zero-ov. loop instr buffer size */ -#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ -#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ -#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ -#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */ -#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ -#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ -#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ -#define XCHAL_HAVE_MUL32_HIGH 1 /* MULUH/MULSH instructions */ -#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ -#define XCHAL_HAVE_L32R 1 /* L32R instruction */ -#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */ -#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ -#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ -#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ -#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ -#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ -#define XCHAL_HAVE_ABS 1 /* ABS instruction */ -/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ -/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ -#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ -#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ -#define XCHAL_HAVE_SPECULATION 0 /* speculation */ -#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ -#define XCHAL_NUM_CONTEXTS 1 /* */ -#define XCHAL_NUM_MISC_REGS 0 /* num of scratch regs (0..4) */ -#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ -#define XCHAL_HAVE_PRID 1 /* processor ID register */ -#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ -#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */ -#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ -#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ -#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */ -#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */ -#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */ -#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ -#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */ -/* TODO: CP is 1 - need assembler support */ -#define XCHAL_HAVE_CP 0 /* CPENABLE reg (coprocessor) */ -#define XCHAL_CP_MAXCFG 2 /* max allowed cp id plus one */ -#define XCHAL_HAVE_MAC16 0 /* MAC16 package */ - -#define XCHAL_HAVE_FUSION 0 /* Fusion*/ -#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */ -#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */ -#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */ -#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */ -#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */ -#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */ -#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */ -#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */ -#define XCHAL_HAVE_FUSION_VITERBI 0 /* Fusion Viterbi option */ -#define XCHAL_HAVE_FUSION_SOFTDEMAP 0 /* Fusion Soft Bit Demap option */ -#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ -#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */ -#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */ -#define XCHAL_HAVE_HIFI3 1 /* HiFi3 Audio Engine pkg */ -#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */ -#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ -#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */ -#define XCHAL_HAVE_HIFI_MINI 0 - - -#define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */ -#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */ -#define XCHAL_HAVE_USER_SPFPU 0 /* user DP floating-point pkg */ -#define XCHAL_HAVE_FP 1 /* single prec floating point */ -#define XCHAL_HAVE_FP_DIV 1 /* FP with DIV instructions */ -#define XCHAL_HAVE_FP_RECIP 1 /* FP with RECIP instructions */ -#define XCHAL_HAVE_FP_SQRT 1 /* FP with SQRT instructions */ -#define XCHAL_HAVE_FP_RSQRT 1 /* FP with RSQRT instructions */ -#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ -#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */ -#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/ -#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */ -#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/ -#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */ -#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */ - -#define XCHAL_HAVE_DFPU_SINGLE_ONLY 1 /* DFPU Coprocessor, single precision only */ -#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */ -#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ -#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ -#define XCHAL_HAVE_PDX4 0 /* PDX4 */ -#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ -#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */ -#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ -#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ -#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ -#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ -#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */ -#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ -#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */ -#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ -#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ -#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ -#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ -#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */ -#define XCHAL_HAVE_GRIVPEP 0 /* GRIVPEP is General Release of IVPEP */ -#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */ - - -/*---------------------------------------------------------------------- - MISC - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */ -#define XCHAL_NUM_WRITEBUFFER_ENTRIES 16 /* size of write buffer */ -#define XCHAL_INST_FETCH_WIDTH 8 /* instr-fetch width in bytes */ -#define XCHAL_DATA_WIDTH 8 /* data width in bytes */ -#define XCHAL_DATA_PIPE_DELAY 2 /* d-side pipeline delay - (1 = 5-stage, 2 = 7-stage) */ -#define XCHAL_CLOCK_GATING_GLOBAL 1 /* global clock gating */ -#define XCHAL_CLOCK_GATING_FUNCUNIT 1 /* funct. unit clock gating */ -/* In T1050, applies to selected core load and store instructions (see ISA): */ -#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ -#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ -#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */ -#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/ - -#define XCHAL_SW_VERSION 1100003 /* sw version of this header */ - -#define XCHAL_CORE_ID "cavs21_LX6HiFi3_RF3_WB16" /* alphanum core name - (CoreID) set in the Xtensa - Processor Generator */ - -#define XCHAL_BUILD_UNIQUE_ID 0x00060F88 /* 22-bit sw build ID */ - -/* - * These definitions describe the hardware targeted by this software. - */ -#define XCHAL_HW_CONFIGID0 0xC2F3FBFE /* ConfigID hi 32 bits*/ -#define XCHAL_HW_CONFIGID1 0x1CC60F88 /* ConfigID lo 32 bits*/ -#define XCHAL_HW_VERSION_NAME "LX6.0.3" /* full version name */ -#define XCHAL_HW_VERSION_MAJOR 2600 /* major ver# of targeted hw */ -#define XCHAL_HW_VERSION_MINOR 3 /* minor ver# of targeted hw */ -#define XCHAL_HW_VERSION 260003 /* major*100+minor */ -#define XCHAL_HW_REL_LX6 1 -#define XCHAL_HW_REL_LX6_0 1 -#define XCHAL_HW_REL_LX6_0_3 1 -#define XCHAL_HW_CONFIGID_RELIABLE 1 -/* If software targets a *range* of hardware versions, these are the bounds: */ -#define XCHAL_HW_MIN_VERSION_MAJOR 2600 /* major v of earliest tgt hw */ -#define XCHAL_HW_MIN_VERSION_MINOR 3 /* minor v of earliest tgt hw */ -#define XCHAL_HW_MIN_VERSION 260003 /* earliest targeted hw */ -#define XCHAL_HW_MAX_VERSION_MAJOR 2600 /* major v of latest tgt hw */ -#define XCHAL_HW_MAX_VERSION_MINOR 3 /* minor v of latest tgt hw */ -#define XCHAL_HW_MAX_VERSION 260003 /* latest targeted hw */ - - -/*---------------------------------------------------------------------- - CACHE - ----------------------------------------------------------------------*/ - -#define XCHAL_ICACHE_LINESIZE 64 /* I-cache line size in bytes */ -#define XCHAL_DCACHE_LINESIZE 64 /* D-cache line size in bytes */ -#define XCHAL_ICACHE_LINEWIDTH 6 /* log2(I line size in bytes) */ -#define XCHAL_DCACHE_LINEWIDTH 6 /* log2(D line size in bytes) */ - -#define XCHAL_ICACHE_SIZE 16384 /* I-cache size in bytes or 0 */ -#define XCHAL_DCACHE_SIZE 49152 /* D-cache size in bytes or 0 */ - -#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ -#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ - -#define XCHAL_HAVE_PREFETCH 1 /* PREFCTL register */ -#define XCHAL_HAVE_PREFETCH_L1 1 /* prefetch to L1 dcache */ -#define XCHAL_PREFETCH_CASTOUT_LINES 2 /* dcache pref. castout bufsz */ -#define XCHAL_PREFETCH_ENTRIES 8 /* cache prefetch entries */ -#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */ -#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */ -#define XCHAL_HAVE_ICACHE_TEST 1 /* Icache test instructions */ -#define XCHAL_HAVE_DCACHE_TEST 1 /* Dcache test instructions */ -#define XCHAL_HAVE_ICACHE_DYN_WAYS 1 /* Icache dynamic way support */ -#define XCHAL_HAVE_DCACHE_DYN_WAYS 1 /* Dcache dynamic way support */ - - - - -/**************************************************************************** - Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code - ****************************************************************************/ - - -#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY - -/*---------------------------------------------------------------------- - CACHE - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ -#define XCHAL_HAVE_AXI 0 /* AXI bus */ - -#define XCHAL_HAVE_PIF_WR_RESP 0 /* pif write response */ -#define XCHAL_HAVE_PIF_REQ_ATTR 1 /* pif attribute */ - -/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ - -/* Number of cache sets in log2(lines per way): */ -#define XCHAL_ICACHE_SETWIDTH 6 -#define XCHAL_DCACHE_SETWIDTH 8 - -/* Cache set associativity (number of ways): */ -#define XCHAL_ICACHE_WAYS 4 -#define XCHAL_DCACHE_WAYS 3 - -/* Cache features: */ -#define XCHAL_ICACHE_LINE_LOCKABLE 1 -#define XCHAL_DCACHE_LINE_LOCKABLE 1 -#define XCHAL_ICACHE_ECC_PARITY XTHAL_MEMEP_ECC -#define XCHAL_DCACHE_ECC_PARITY XTHAL_MEMEP_ECC - -/* Cache access size in bytes (affects operation of SICW instruction): */ -#define XCHAL_ICACHE_ACCESS_SIZE 8 -#define XCHAL_DCACHE_ACCESS_SIZE 8 - -#define XCHAL_DCACHE_BANKS 1 /* number of banks */ - -/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ -#define XCHAL_CA_BITS 4 - - -/*---------------------------------------------------------------------- - INTERNAL I/D RAM/ROMs and XLMI - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ -#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ -#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ -#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ -#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ -#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ - -#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ - - -/*---------------------------------------------------------------------- - INTERRUPTS and TIMERS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ -#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ -#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ -#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ -#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ -#define XCHAL_NUM_INTERRUPTS 21 /* number of interrupts */ -#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ -#define XCHAL_NUM_EXTINTERRUPTS 8 /* num of external interrupts */ -#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels - (not including level zero) */ -#define XCHAL_EXCM_LEVEL 5 /* level masked by PS.EXCM */ - /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ - -/* Masks of interrupts at each interrupt level: */ -#define XCHAL_INTLEVEL1_MASK 0x0000000F -#define XCHAL_INTLEVEL2_MASK 0x000000F0 -#define XCHAL_INTLEVEL3_MASK 0x00000F00 -#define XCHAL_INTLEVEL4_MASK 0x00007000 -#define XCHAL_INTLEVEL5_MASK 0x000F8000 -#define XCHAL_INTLEVEL6_MASK 0x00000000 -#define XCHAL_INTLEVEL7_MASK 0x00100000 - -/* Masks of interrupts at each range 1..n of interrupt levels: */ -#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x0000000F -#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x000000FF -#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x00000FFF -#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x00007FFF -#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x000FFFFF -#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x000FFFFF -#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x001FFFFF - -/* Level of each interrupt: */ -#define XCHAL_INT0_LEVEL 1 -#define XCHAL_INT1_LEVEL 1 -#define XCHAL_INT2_LEVEL 1 -#define XCHAL_INT3_LEVEL 1 -#define XCHAL_INT4_LEVEL 2 -#define XCHAL_INT5_LEVEL 2 -#define XCHAL_INT6_LEVEL 2 -#define XCHAL_INT7_LEVEL 2 -#define XCHAL_INT8_LEVEL 3 -#define XCHAL_INT9_LEVEL 3 -#define XCHAL_INT10_LEVEL 3 -#define XCHAL_INT11_LEVEL 3 -#define XCHAL_INT12_LEVEL 4 -#define XCHAL_INT13_LEVEL 4 -#define XCHAL_INT14_LEVEL 4 -#define XCHAL_INT15_LEVEL 5 -#define XCHAL_INT16_LEVEL 5 -#define XCHAL_INT17_LEVEL 5 -#define XCHAL_INT18_LEVEL 5 -#define XCHAL_INT19_LEVEL 5 -#define XCHAL_INT20_LEVEL 7 -#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ -#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ -#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with - EXCSAVE/EPS/EPC_n, RFI n) */ - -/* Type of each interrupt: */ -#define XCHAL_INT0_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT1_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT3_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT4_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT5_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT8_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT9_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT10_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT12_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT13_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT19_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT20_TYPE XTHAL_INTTYPE_NMI - -/* Masks of interrupts for each type of interrupt: */ -#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFE00000 -#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0008D999 -#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000000 -#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x00072444 -#define XCHAL_INTTYPE_MASK_TIMER 0x00000222 -#define XCHAL_INTTYPE_MASK_NMI 0x00100000 -#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 -#define XCHAL_INTTYPE_MASK_PROFILING 0x00000000 - -/* Interrupt numbers assigned to specific interrupt sources: */ -#define XCHAL_TIMER0_INTERRUPT 1 /* CCOMPARE0 */ -#define XCHAL_TIMER1_INTERRUPT 5 /* CCOMPARE1 */ -#define XCHAL_TIMER2_INTERRUPT 9 /* CCOMPARE2 */ -#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED -#define XCHAL_NMI_INTERRUPT 20 /* non-maskable interrupt */ - -/* Interrupt numbers for levels at which only one interrupt is configured: */ -#define XCHAL_INTLEVEL7_NUM 20 -/* (There are many interrupts each at level(s) 1, 2, 3, 4, 5.) */ - - -/* - * External interrupt mapping. - * These macros describe how Xtensa processor interrupt numbers - * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) - * map to external BInterrupt<n> pins, for those interrupts - * configured as external (level-triggered, edge-triggered, or NMI). - * See the Xtensa processor databook for more details. - */ - -/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */ -#define XCHAL_EXTINT0_NUM 2 /* (intlevel 1) */ -#define XCHAL_EXTINT1_NUM 6 /* (intlevel 2) */ -#define XCHAL_EXTINT2_NUM 10 /* (intlevel 3) */ -#define XCHAL_EXTINT3_NUM 13 /* (intlevel 4) */ -#define XCHAL_EXTINT4_NUM 16 /* (intlevel 5) */ -#define XCHAL_EXTINT5_NUM 17 /* (intlevel 5) */ -#define XCHAL_EXTINT6_NUM 18 /* (intlevel 5) */ -#define XCHAL_EXTINT7_NUM 20 /* (intlevel 7) */ -/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */ -#define XCHAL_INT2_EXTNUM 0 /* (intlevel 1) */ -#define XCHAL_INT6_EXTNUM 1 /* (intlevel 2) */ -#define XCHAL_INT10_EXTNUM 2 /* (intlevel 3) */ -#define XCHAL_INT13_EXTNUM 3 /* (intlevel 4) */ -#define XCHAL_INT16_EXTNUM 4 /* (intlevel 5) */ -#define XCHAL_INT17_EXTNUM 5 /* (intlevel 5) */ -#define XCHAL_INT18_EXTNUM 6 /* (intlevel 5) */ -#define XCHAL_INT20_EXTNUM 7 /* (intlevel 7) */ - - -/*---------------------------------------------------------------------- - EXCEPTIONS and VECTORS - ----------------------------------------------------------------------*/ - -#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture - number: 1 == XEA1 (old) - 2 == XEA2 (new) - 0 == XEAX (extern) or TX */ -#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ -#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ -#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ -#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ -#define XCHAL_HAVE_HALT 0 /* halt architecture option */ -#define XCHAL_HAVE_BOOTLOADER 1 /* boot loader (for TX) */ -#define XCHAL_HAVE_MEM_ECC_PARITY 1 /* local memory ECC/parity */ -#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ -#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ -#define XCHAL_VECBASE_RESET_VADDR 0xBE040000 /* VECBASE reset value */ -#define XCHAL_VECBASE_RESET_PADDR 0xBE040000 -#define XCHAL_RESET_VECBASE_OVERLAP 0 - -#define XCHAL_RESET_VECTOR0_VADDR 0xBEFE0000 -#define XCHAL_RESET_VECTOR0_PADDR 0xBEFE0000 -#define XCHAL_RESET_VECTOR1_VADDR 0xBE800000 -#define XCHAL_RESET_VECTOR1_PADDR 0xBE800000 -#define XCHAL_RESET_VECTOR_VADDR 0xBEFE0000 -#define XCHAL_RESET_VECTOR_PADDR 0xBEFE0000 -#define XCHAL_MEMERROR_VECTOR0_VADDR 0xBEFE0500 -#define XCHAL_MEMERROR_VECTOR0_PADDR 0xBEFE0500 -#define XCHAL_MEMERROR_VECTOR1_VADDR 0xBEFE0500 -#define XCHAL_MEMERROR_VECTOR1_PADDR 0xBEFE0500 -#define XCHAL_MEMERROR_VECTOR_VADDR 0xBEFE0500 -#define XCHAL_MEMERROR_VECTOR_PADDR 0xBEFE0500 -#define XCHAL_USER_VECOFS 0x00000340 -#define XCHAL_USER_VECTOR_VADDR 0xBE040340 -#define XCHAL_USER_VECTOR_PADDR 0xBE040340 -#define XCHAL_KERNEL_VECOFS 0x00000300 -#define XCHAL_KERNEL_VECTOR_VADDR 0xBE040300 -#define XCHAL_KERNEL_VECTOR_PADDR 0xBE040300 -#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 -#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xBE0403C0 -#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0xBE0403C0 -#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 -#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 -#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 -#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 -#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 -#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 -#define XCHAL_WINDOW_VECTORS_VADDR 0xBE040400 -#define XCHAL_WINDOW_VECTORS_PADDR 0xBE040400 -#define XCHAL_INTLEVEL2_VECOFS 0x00000180 -#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xBE040180 -#define XCHAL_INTLEVEL2_VECTOR_PADDR 0xBE040180 -#define XCHAL_INTLEVEL3_VECOFS 0x000001C0 -#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xBE0401C0 -#define XCHAL_INTLEVEL3_VECTOR_PADDR 0xBE0401C0 -#define XCHAL_INTLEVEL4_VECOFS 0x00000200 -#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xBE040200 -#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xBE040200 -#define XCHAL_INTLEVEL5_VECOFS 0x00000240 -#define XCHAL_INTLEVEL5_VECTOR_VADDR 0xBE040240 -#define XCHAL_INTLEVEL5_VECTOR_PADDR 0xBE040240 -#define XCHAL_INTLEVEL6_VECOFS 0x00000280 -#define XCHAL_INTLEVEL6_VECTOR_VADDR 0xBE040280 -#define XCHAL_INTLEVEL6_VECTOR_PADDR 0xBE040280 -#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS -#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR -#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR -#define XCHAL_NMI_VECOFS 0x000002C0 -#define XCHAL_NMI_VECTOR_VADDR 0xBE0402C0 -#define XCHAL_NMI_VECTOR_PADDR 0xBE0402C0 -#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS -#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR -#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR - - -/*---------------------------------------------------------------------- - DEBUG MODULE - ----------------------------------------------------------------------*/ - -/* Misc */ -#define XCHAL_HAVE_DEBUG_ERI 0 /* ERI to debug module */ -#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */ -#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */ - -/* On-Chip Debug (OCD) */ -#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ -#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ -#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ -#define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */ -#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */ - -/* TRAX (in core) */ -#define XCHAL_HAVE_TRAX 0 /* TRAX in debug module */ -#define XCHAL_TRAX_MEM_SIZE 0 /* TRAX memory size in bytes */ -#define XCHAL_TRAX_MEM_SHAREABLE 0 /* start/end regs; ready sig. */ -#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */ -#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */ - -/* Perf counters */ -#define XCHAL_NUM_PERF_COUNTERS 0 /* performance counters */ - - -/*---------------------------------------------------------------------- - MMU - ----------------------------------------------------------------------*/ - -/* See core-matmap.h header file for more details. */ - -#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ -#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ -#define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */ -#define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */ -#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ -#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */ -#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ -#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table - [autorefill] and protection) - usable for an MMU-based OS */ -/* If none of the above last 4 are set, it's a custom TLB configuration. */ - -#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ -#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ -#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ - -#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ - - -#endif /* _XTENSA_CORE_CONFIGURATION_H */ diff --git a/src/platform/haswell/include/Makefile.am b/src/platform/haswell/include/Makefile.am index 19f40eb..c5113a4 100644 --- a/src/platform/haswell/include/Makefile.am +++ b/src/platform/haswell/include/Makefile.am @@ -1 +1 @@ -SUBDIRS = platform xtensa +SUBDIRS = arch platform diff --git a/src/platform/haswell/include/arch/Makefile.am b/src/platform/haswell/include/arch/Makefile.am new file mode 100644 index 0000000..63616bf --- /dev/null +++ b/src/platform/haswell/include/arch/Makefile.am @@ -0,0 +1 @@ +SUBDIRS = xtensa diff --git a/src/platform/haswell/include/xtensa/Makefile.am b/src/platform/haswell/include/arch/xtensa/Makefile.am similarity index 100% rename from src/platform/haswell/include/xtensa/Makefile.am rename to src/platform/haswell/include/arch/xtensa/Makefile.am diff --git a/src/platform/haswell/include/xtensa/config/Makefile.am b/src/platform/haswell/include/arch/xtensa/config/Makefile.am similarity index 100% rename from src/platform/haswell/include/xtensa/config/Makefile.am rename to src/platform/haswell/include/arch/xtensa/config/Makefile.am diff --git a/src/platform/haswell/include/xtensa/config/core-isa-bdw.h b/src/platform/haswell/include/arch/xtensa/config/core-isa-bdw.h similarity index 100% rename from src/platform/haswell/include/xtensa/config/core-isa-bdw.h rename to src/platform/haswell/include/arch/xtensa/config/core-isa-bdw.h diff --git a/src/platform/haswell/include/xtensa/config/core-isa-hsw.h b/src/platform/haswell/include/arch/xtensa/config/core-isa-hsw.h similarity index 100% rename from src/platform/haswell/include/xtensa/config/core-isa-hsw.h rename to src/platform/haswell/include/arch/xtensa/config/core-isa-hsw.h diff --git a/src/platform/haswell/include/xtensa/config/core-isa.h b/src/platform/haswell/include/arch/xtensa/config/core-isa.h similarity index 100% rename from src/platform/haswell/include/xtensa/config/core-isa.h rename to src/platform/haswell/include/arch/xtensa/config/core-isa.h diff --git a/src/platform/haswell/include/xtensa/config/core-matmap.h b/src/platform/haswell/include/arch/xtensa/config/core-matmap.h similarity index 100% rename from src/platform/haswell/include/xtensa/config/core-matmap.h rename to src/platform/haswell/include/arch/xtensa/config/core-matmap.h diff --git a/src/platform/baytrail/include/xtensa/config/defs.h b/src/platform/haswell/include/arch/xtensa/config/defs.h similarity index 100% rename from src/platform/baytrail/include/xtensa/config/defs.h rename to src/platform/haswell/include/arch/xtensa/config/defs.h diff --git a/src/platform/haswell/include/xtensa/config/specreg.h b/src/platform/haswell/include/arch/xtensa/config/specreg.h similarity index 100% rename from src/platform/haswell/include/xtensa/config/specreg.h rename to src/platform/haswell/include/arch/xtensa/config/specreg.h diff --git a/src/platform/haswell/include/xtensa/config/system.h b/src/platform/haswell/include/arch/xtensa/config/system.h similarity index 100% rename from src/platform/haswell/include/xtensa/config/system.h rename to src/platform/haswell/include/arch/xtensa/config/system.h diff --git a/src/platform/haswell/include/xtensa/config/tie-asm.h b/src/platform/haswell/include/arch/xtensa/config/tie-asm.h similarity index 100% rename from src/platform/haswell/include/xtensa/config/tie-asm.h rename to src/platform/haswell/include/arch/xtensa/config/tie-asm.h diff --git a/src/platform/haswell/include/xtensa/config/tie.h b/src/platform/haswell/include/arch/xtensa/config/tie.h similarity index 100% rename from src/platform/haswell/include/xtensa/config/tie.h rename to src/platform/haswell/include/arch/xtensa/config/tie.h -- 2.17.1

3 5

[Sound-open-firmware] [RFC PATCH v2 0/8] Introducing a new API for DMA_get()
by Ranjani Sridharan 08 Jun '18

08 Jun '18

This set of patches proposes a new API for dma_get() that procures a DMAC based on the requested copy capability and flags indicating shared/exclusive access. It also updates the existing user of dma_get() to use the new API based on the specific usage. The platform DMAC definitions have also been updated to include information about copy capabilities supported. This has only been tested on the BYT platform with a Minnowboard Turbot board and a RT5651 codec where it has passed the sanity check test. Further testing is required on other platforms to ensure there are no regressions. This patch is still RFC/RFT and needs testing on CNL/HSW. The corresponding DMAC/DMAC channel definitions from topology/kernel driver need to be removed. This is still work in progress. v2 changes: 1. dma_get() consolidated for all platforms 2. dmac definitions include copy capability 3. Added some helper api's to retreive platform DMAC info Ranjani Sridharan (8): platform: dma: move dmac initialization dma: define platform DMAC capabilities dma: ops: introduce num_channels_busy to get number of busy channels in DMAC dma: add API's to retrieve platform DMAC information dma: introduce new API for requesting DMAC dma: use newly defined API for request DMAC dma: remove dmac id argument from dma_copy_context() trace: remove trace dmac id definition src/arch/xtensa/Makefile.am | 1 + src/audio/dai.c | 3 +- src/audio/host.c | 20 +++-- src/drivers/dw-dma.c | 9 ++ src/drivers/hda-dma.c | 9 ++ src/host/common_test.c | 2 +- src/include/sof/dma.h | 26 +++++- src/ipc/apl-ipc.c | 4 +- src/ipc/byt-ipc.c | 4 +- src/ipc/cnl-ipc.c | 4 +- src/ipc/dma-copy.c | 5 +- src/ipc/hsw-ipc.c | 4 +- src/lib/Makefile.am | 11 +++ src/lib/dma-trace.c | 2 +- src/lib/dma.c | 84 +++++++++++++++++++ src/platform/apollolake/dma.c | 30 +++++-- .../apollolake/include/platform/platform.h | 3 - src/platform/apollolake/platform.c | 21 +---- src/platform/baytrail/dma.c | 23 +++-- .../baytrail/include/platform/platform.h | 3 - src/platform/baytrail/platform.c | 22 +---- src/platform/cannonlake/dma.c | 29 +++++-- .../cannonlake/include/platform/platform.h | 3 - src/platform/cannonlake/platform.c | 21 +---- src/platform/haswell/dma.c | 35 ++++++-- .../haswell/include/platform/platform.h | 3 - src/platform/haswell/platform.c | 20 +---- 27 files changed, 262 insertions(+), 139 deletions(-) create mode 100644 src/lib/dma.c -- 2.17.1

2 17

[Sound-open-firmware] [PATCH 1/2] topology: enable ssp2 for capture feature.
by Wu Zhigang 08 Jun '18

08 Jun '18

the ssp2 should be tdm8-32bit. Signed-off-by: Wu Zhigang <zhigang.wu(a)linux.intel.com> --- topology/sof-apl-tdf8532.m4 | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/topology/sof-apl-tdf8532.m4 b/topology/sof-apl-tdf8532.m4 index 5554e58..2a63943 100644 --- a/topology/sof-apl-tdf8532.m4 +++ b/topology/sof-apl-tdf8532.m4 @@ -38,19 +38,19 @@ PIPELINE_PCM_DAI_ADD(sof/pipe-volume-playback.m4, 1, 0, 4, s32le, 48, 1000, 0, 0, 0, 1, SSP, 4, s32le, 2) -# Low Latency playback pipeline 2 on PCM 1 using max 2 channels of s16le. +# Low Latency playback pipeline 2 on PCM 1 using max 8 channels of s32le. # Schedule 48 frames per 1000us deadline on core 0 with priority 0 -# Use DMAC 0 channel 1 for PCM audio playback data +# Use DMAC 0 channel 2 for PCM audio playback data PIPELINE_PCM_DAI_ADD(sof/pipe-volume-playback.m4, - 2, 1, 2, s16le, - 48, 1000, 0, 0, 0, 1, SSP, 2, s16le, 2) + 2, 1, 8, s32le, + 48, 1000, 0, 0, 0, 2, SSP, 2, s32le, 2) -# Low Latency capture pipeline 3 on PCM 1 using max 2 channels of s16le. +# Low Latency capture pipeline 3 on PCM 1 using max 8 channels of s32le. # Schedule 48 frames per 1000us deadline on core 0 with priority 0 -# Use DMAC 0 channel 1 for PCM audio playback data +# Use DMAC 0 channel 3 for PCM audio playback data PIPELINE_PCM_DAI_ADD(sof/pipe-volume-capture.m4, - 3, 1, 2, s16le, - 48, 1000, 0, 0, 0, 1, SSP, 2, s16le, 2) + 3, 1, 8, s32le, + 48, 1000, 0, 0, 0, 3, SSP, 2, s32le, 2) # Low Latency playback pipeline 4 on PCM 2 using max 2 channels of s16le. # Schedule 48 frames per 1000us deadline on core 0 with priority 0 @@ -114,17 +114,17 @@ DAI_ADD(sof/pipe-dai-playback.m4, 48, 1000, 0, 0) # playback DAI is SSP2 using 2 periods -# Buffers use s16le format, with 48 frame per 1000us on core 0 with priority 0 +# Buffers use s32le format, with 48 frame per 1000us on core 0 with priority 0 DAI_ADD(sof/pipe-dai-playback.m4, 2, SSP, 2, SSP2-Codec, - PIPELINE_SOURCE_2, 2, s16le, + PIPELINE_SOURCE_2, 2, s32le, 48, 1000, 0, 0) # capture DAI is SSP2 using 2 periods -# Buffers use s16le format, with 48 frame per 1000us on core 0 with priority 0 +# Buffers use s32le format, with 48 frame per 1000us on core 0 with priority 0 DAI_ADD(sof/pipe-dai-capture.m4, 3, SSP, 2, SSP2-Codec, - PIPELINE_SINK_3, 2, s16le, + PIPELINE_SINK_3, 2, s32le, 48, 1000, 0, 0) # playback DAI is SSP0 using 2 periods @@ -196,11 +196,11 @@ DAI_CONFIG(SSP, 4, 4, SSP4-Codec, SSP_SAMPLE_BITS(SSP, 4, 32))) DAI_CONFIG(SSP, 2, 2, SSP2-Codec, - SSP_CONFIG(I2S, DAI_CLOCK(mclk, 24576000, codec_mclk_in), - DAI_CLOCK(bclk, 1536000, codec_slave), + SSP_CONFIG(DSP_B, DAI_CLOCK(mclk, 24576000, codec_mclk_in), + DAI_CLOCK(bclk, 12288000, codec_slave), DAI_CLOCK(fsync, 48000, codec_slave), - DAI_TDM(2, 16, 3, 3), - SSP_SAMPLE_BITS(SSP, 2, 16))) + DAI_TDM(2, 32, 255, 255), + SSP_SAMPLE_BITS(SSP, 2, 32))) DAI_CONFIG(SSP, 0, 0, SSP0-Codec, SSP_CONFIG(I2S, DAI_CLOCK(mclk, 24576000, codec_mclk_in), -- 2.14.1

5 13

[Sound-open-firmware] [PATCH] apl: memory: expand number of 256 Bytes block to be 64
by Keyon Jie 08 Jun '18

08 Jun '18

The 256 Bytes block are used frequently for component new, 16 is not enough for GP-MRB multiple SSPs/pipelines support, here expand it to be 64. Signed-off-by: Keyon Jie <yang.jie(a)linux.intel.com> --- Test with: APL-MRB with tdf8532 codec Linux topic/sof-v4.14: 3ffd39334cb53aced88b8aba17cae3df9ee2736f SOF master: 48a61423f6c2d2bcf5fad854a9b3d37dfb43b546 Tool master: 7ee114d2ed822a0dbfc0dc3a37fd5c4977e00be8 --- src/platform/apollolake/include/platform/memory.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/platform/apollolake/include/platform/memory.h b/src/platform/apollolake/include/platform/memory.h index e7f3ee3..652db96 100644 --- a/src/platform/apollolake/include/platform/memory.h +++ b/src/platform/apollolake/include/platform/memory.h @@ -159,7 +159,7 @@ #define HEAP_RT_COUNT32 128 #define HEAP_RT_COUNT64 64 #define HEAP_RT_COUNT128 32 -#define HEAP_RT_COUNT256 16 +#define HEAP_RT_COUNT256 64 #define HEAP_RT_COUNT512 8 #define HEAP_RT_COUNT1024 4 -- 2.14.1

3 6

Re: [Sound-open-firmware] [PATCH V2 2/2] scripts: docker: Simplify docker build
by Liam Girdwood 08 Jun '18

08 Jun '18

On Wed, 2018-06-06 at 12:06 +0800, Pan, Xiuli wrote: > > > -RUN useradd --create-home -d /home/sof -u $UID -G sudo sof > > > -RUN echo "sof:test0000" | chpasswd > > > -RUN adduser sof sudo > > > +# Set up sof user > > > +RUN useradd --create-home -d /home/sof -u $UID -G sudo sof && \ > > > +echo "sof:test0000" | chpasswd && adduser sof sudo && echo '%sudo > > > ALL=(ALL) > > > NOPASSWD:ALL' >> /etc/sudoers > > > > Does this mean rimage is installed on the Docker FS overlay with no password > > now > > ? > > The rimage is installed every time when we run scripts/xtensa-build-all.sh. > And the docker-run recommend to use scripts to build the sof. This > change just make sudo need no password in docker. > The rimage install need sudo with password, either we change the scripts > or make sudo need no password. > I just choose to use no password to make docker easier to use. We can't compromise security. Maybe the easiest thing is to make xtensa-build.sh take a -l flag to install rimage to ~/bin and use this version. Liam

2 6

[Sound-open-firmware] [RFC PATCH 0/6] Introducing a new API for dma_get()
by Ranjani Sridharan 08 Jun '18

08 Jun '18

This set of patches proposes a new API for dma_get() that procures a DMAC based on the requested user type, copy direction and flags indicating shared/exclusive access. It also updates the existing user of dma_get() to use the new API based on the specific usage. The platform DMAC definitions have also been updated to include information about usage and copy direction to support the new API. This has only been tested on the BYT platform with a Minnowboard Turbot board and a RT5651 codec. Further testing is required on other platforms to ensure there are no regressions. Looking for feedback on initial implementation. The corresponding DMAC/DMAC channel definitions from topology/kernel driver need to be removed. This is still work in progress. Ranjani Sridharan (6): platform: dma: consolidate dmac initialization dma: ops: introduce channel_status() op to retrieve number of channels in use dma: introduce new API for requesting DMAC dma: use newly defined API for request DMAC dma: remove dmac id argument from dma_copy_context() trace: remove trace dmac id definition src/audio/dai.c | 7 ++- src/audio/host.c | 28 +++++++-- src/drivers/dw-dma.c | 19 ++++++ src/drivers/hda-dma.c | 20 ++++++ src/host/common_test.c | 2 +- src/include/sof/dma.h | 38 +++++++++++- src/ipc/apl-ipc.c | 3 +- src/ipc/byt-ipc.c | 4 +- src/ipc/cnl-ipc.c | 4 +- src/ipc/dma-copy.c | 9 ++- src/ipc/hsw-ipc.c | 4 +- src/lib/dma-trace.c | 2 +- src/platform/apollolake/dma.c | 62 +++++++++++++++++-- .../apollolake/include/platform/platform.h | 3 - src/platform/apollolake/platform.c | 21 +------ src/platform/baytrail/dma.c | 50 +++++++++++++-- .../baytrail/include/platform/platform.h | 3 - src/platform/baytrail/platform.c | 22 +------ src/platform/cannonlake/dma.c | 62 +++++++++++++++++-- .../cannonlake/include/platform/platform.h | 3 - src/platform/cannonlake/platform.c | 21 +------ src/platform/haswell/dma.c | 58 ++++++++++++++--- .../haswell/include/platform/platform.h | 3 - src/platform/haswell/platform.c | 16 +---- 24 files changed, 337 insertions(+), 127 deletions(-) -- 2.17.0

6 41

[Sound-open-firmware] [PATCH] README: Fix a typo in the example SOF configure command
by Seppo Ingalsuo 07 Jun '18

07 Jun '18

The $PWD environment variable (the current directory) need to be in upper case. Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> --- README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README b/README index adc23e2..c2ac1ca 100644 --- a/README +++ b/README @@ -24,7 +24,7 @@ If building library for host platform, run the following configure. Please modif the --prefix option to choose the directory for installing the library files and headers -./configure --with-arch=host --enable-library=yes --host=x86_64-unknown-linux-gnu --prefix=$pwd/../host-root/ +./configure --with-arch=host --enable-library=yes --host=x86_64-unknown-linux-gnu --prefix=$PWD/../host-root/ 4) make -- 2.14.1

2 1

[Sound-open-firmware] [PATCH 1/2] uapi: ipc: Add lbm in sof_ipc_dai_config
by Xiuli Pan 06 Jun '18

06 Jun '18

From: Pan Xiuli <xiuli.pan(a)linux.intel.com> Add loopback mode filed lbm in sof_ipc_dai_config to condif BE dai loobback mode. Signed-off-by: Pan Xiuli <xiuli.pan(a)linux.intel.com> --- Work with patch set: SOF-Kernel: ASoC: SOF: upai: ipc: Add lbm in sof_ipc_dai_config ASoC: SOF: uapi: topology: Add SOF_TKN_DAI_LBM for ssp loopback mode ASoC: SOF: topology: Add topology handler for dai config loopback mode SOF: uapi: ipc: Add lbm in sof_ipc_dai_config IPC: Add IPC handler for dai config loopback mode SOF-Tools: topology: Add SOF_TKN_DAI_LBM for ssp loopback mode topology: m4: Add option for loopback mode in DAI config topology: test: Add loopback topology test & santity test with: Mininow max rt5651 and UP2 Hifiberry PRO and CNL nocodec SOF master: 65ddcddfcc9a20f5b622cf3ba93dc326387a9d5d SOF-Tool master: 07d290c8ac6026af28bada021ac2215e3453fa88 https://github.com/plbossart/sound/tree/topic/sof-v4.14: 3ffd39334cb53aced88b8aba17cae3df9ee2736f --- src/include/uapi/ipc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/include/uapi/ipc.h b/src/include/uapi/ipc.h index 9b1063f..06498fb 100644 --- a/src/include/uapi/ipc.h +++ b/src/include/uapi/ipc.h @@ -345,7 +345,7 @@ struct sof_ipc_dai_config { /* physical protocol and clocking */ uint16_t format; /* SOF_DAI_FMT_ */ - uint16_t reserved; /* alignment */ + uint16_t lbm; /* loopback mode*/ /* HW specific data */ union { -- 2.7.4

6 16

[Sound-open-firmware] [PATCH] ipc: remove duplicated sof_ipc_chmap from sof_ipc_pcm_params
by Liam Girdwood 05 Jun '18

05 Jun '18

From: Tomasz Lauda <tomasz.lauda(a)linux.intel.com> We don't need duplicated sof_ipc_chmap. This change also requires change in kernel. Signed-off-by: Tomasz Lauda <tomasz.lauda(a)linux.intel.com> --- src/include/uapi/ipc.h | 1 - 1 file changed, 1 deletion(-) diff --git a/src/include/uapi/ipc.h b/src/include/uapi/ipc.h index 9b1063f..8947a0a 100644 --- a/src/include/uapi/ipc.h +++ b/src/include/uapi/ipc.h @@ -473,7 +473,6 @@ struct sof_ipc_pcm_params { struct sof_ipc_hdr hdr; uint32_t comp_id; struct sof_ipc_stream_params params; - enum sof_ipc_chmap channel_map[]; } __attribute__((packed)); /* PCM params info reply - SOF_IPC_STREAM_PCM_PARAMS_REPLY */ -- 2.17.0

3 11

[Sound-open-firmware] [PATCH] SSP: refine ssp config function
by Rander Wang 05 Jun '18

05 Jun '18

(1)Remove unused code (2)Refine comments (3)Refine master & slave mode setting (4)Refine Frame polarity setting Signed-off-by: Rander Wang <rander.wang(a)linux.intel.com> --- test it on Broadwell, no need to test other platforms SOF: master 131a1887631621 kernel: v4.14 d09db67c5a9d6d SOF-tools: master 13b56fa6047c566a --- src/drivers/hsw-ssp.c | 45 +++++++++++++-------------------------------- 1 file changed, 13 insertions(+), 32 deletions(-) diff --git a/src/drivers/hsw-ssp.c b/src/drivers/hsw-ssp.c index a68898e..8e30900 100644 --- a/src/drivers/hsw-ssp.c +++ b/src/drivers/hsw-ssp.c @@ -111,26 +111,16 @@ static inline int ssp_set_config(struct dai *dai, /* reset SSP settings */ /* sscr0 dynamic settings are DSS, EDSS, SCR, FRDC, ECS */ - sscr0 = SSCR0_MOD | SSCR0_PSP; - /* - * FIXME: PINTE and RWOT are not set in sscr1 - * sscr1 = SSCR1_PINTE | SSCR1_RWOT; - */ - /* sscr1 dynamic settings are TFT, RFT, SFRMDIR, SCLKDIR, SCFR */ sscr1 = SSCR1_TTE | SSCR1_TTELP; -#ifdef ENABLE_TIE_RIE /* FIXME: not enabled, difference with SST driver */ - //sscr1 |= SSCR1_TIE | SSCR1_RIE; -#endif - - // FIXME COE does this ? + /* enable Transmit underrun mode 1 */ sscr2 = SSCR2_TURM1; /* sspsp dynamic settings are SCMODE, SFRMP, DMYSTRT, SFRMWDTH */ - sspsp = SSPSP_ETDS; /* make sure SDO line is tri-stated when inactive */ + sspsp = 0x0; /* sspsp2 no dynamic setting */ sspsp2 = 0x0; @@ -138,33 +128,24 @@ static inline int ssp_set_config(struct dai *dai, ssp->config = *config; ssp->params = config->ssp; - /* clock masters */ - /* - * On TNG/BYT/CHT, the SSP wrapper generates the fs even in master mode, - * the master/slave choice depends on the clock type - */ - sscr1 |= SSCR1_SFRMDIR; - switch (config->format & SOF_DAI_FMT_MASTER_MASK) { case SOF_DAI_FMT_CBM_CFM: - //sscr0 |= SSCR0_ECS; /* external clock used */ - sscr1 |= SSCR1_SCLKDIR; - - break; - case SOF_DAI_FMT_CBS_CFS: -#ifdef ENABLE_SSRCR1_SCFR /* FIXME: is this needed ? */ + sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR; +#ifdef ENABLE_SSRCR1_SCFR sscr1 |= SSCR1_SCFR; #endif break; + case SOF_DAI_FMT_CBS_CFS: + break; case SOF_DAI_FMT_CBM_CFS: - sscr0 |= SSCR0_ECS; /* external clock used */ sscr1 |= SSCR1_SCLKDIR; - break; - case SOF_DAI_FMT_CBS_CFM: -#ifdef ENABLE_SSRCR1_SCFR /* FIXME: is this needed ? */ +#ifdef ENABLE_SSRCR1_SCFR sscr1 |= SSCR1_SCFR; #endif break; + case SOF_DAI_FMT_CBS_CFM: + sscr1 |= SSCR1_SFRMDIR; + break; default: trace_ssp_error("ec2"); ret = -EINVAL; @@ -346,7 +327,7 @@ static inline int ssp_set_config(struct dai *dai, frame_len = 1; /* handle frame polarity, DSP_A default is rising/active high */ - sspsp |= SSPSP_SFRMP(inverted_frame); + sspsp |= SSPSP_SFRMP(!inverted_frame); sspsp2 |= (frame_end_padding & SSPSP2_FEP_MASK); break; @@ -359,8 +340,8 @@ static inline int ssp_set_config(struct dai *dai, /* set asserted frame length */ frame_len = 1; - /* handle frame polarity, DSP_A default is rising/active high */ - sspsp |= SSPSP_SFRMP(inverted_frame); + /* handle frame polarity, DSP_B default is rising/active high */ + sspsp |= SSPSP_SFRMP(!inverted_frame); sspsp2 |= (frame_end_padding & SSPSP2_FEP_MASK); break; -- 2.14.1

3 4

[Sound-open-firmware] [PATCH V2 1/2] scripts: docker: Add proxy settings
by Xiuli Pan 05 Jun '18

05 Jun '18

From: Pan Xiuli <xiuli.pan(a)linux.intel.com> Modify Dockerfile to copy apt.conf from host and set host proxy to environment. Also modify some git url to http url in order to use the proxy. Also add a docker-build.sh to help docker build Signed-off-by: Pan Xiuli <xiuli.pan(a)linux.intel.com> --- V2: Add selection to use git url when no proxy is used --- scripts/README.docker | 3 ++- scripts/docker_build/Dockerfile | 23 ++++++++++++++++++----- scripts/docker_build/docker-build.sh | 7 +++++++ 3 files changed, 27 insertions(+), 6 deletions(-) create mode 100755 scripts/docker_build/docker-build.sh diff --git a/scripts/README.docker b/scripts/README.docker index 82558b1..e2f189f 100644 --- a/scripts/README.docker +++ b/scripts/README.docker @@ -16,7 +16,8 @@ First, build the docker container. This step needs to be done initially and when the toolchain or alsa dependencies are updated. cd scripts/docker_build -docker build --build-arg UID=$(id -u) -t sof . + +./docker-build.sh After the container is built, it can be used to run the scripts. diff --git a/scripts/docker_build/Dockerfile b/scripts/docker_build/Dockerfile index 7ee0a45..8dede3c 100644 --- a/scripts/docker_build/Dockerfile +++ b/scripts/docker_build/Dockerfile @@ -17,6 +17,13 @@ FROM ubuntu:16.04 ARG UID=1000 +# Set up proxy from host +COPY apt.conf /etc/apt/ +ARG host_http_proxy +ARG host_https_proxy +ENV http_proxy $host_http_proxy +ENV https_proxy $host_https_proxy + RUN apt-get -y update && \ apt-get install -y \ autoconf \ @@ -49,11 +56,17 @@ RUN apt-get clean RUN update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-7 70 --slave /usr/bin/g++ g++ /usr/bin/g++-7 # Use ToT alsa utils for the latest topology patches. -RUN mkdir -p /root/alsa-build -RUN cd /root/alsa-build && git clone git://git.alsa-project.org/alsa-lib.git -RUN cd /root/alsa-build && git clone git://git.alsa-project.org/alsa-utils.git -RUN cd /root/alsa-build/alsa-lib && ./gitcompile && make install -RUN cd /root/alsa-build/alsa-utils && ./gitcompile && make install +RUN mkdir -p /root/alsa-build && cd /root/alsa-build && \ + if [ "x$http_proxy" = "x" ]; then \ + git clone git://git.alsa-project.org/alsa-lib.git && \ + git clone git://git.alsa-project.org/alsa-utils.git ; \ + else \ + git clone http://git.alsa-project.org/http/alsa-lib.git && \ + git clone http://git.alsa-project.org/http/alsa-utils.git; \ + fi && \ +cd /root/alsa-build/alsa-lib && ./gitcompile && make install && \ +cd /root/alsa-build/alsa-utils && ./gitcompile && make install && \ +cd /root/ && rm -rf alsa-build RUN useradd --create-home -d /home/sof -u $UID -G sudo sof RUN echo "sof:test0000" | chpasswd diff --git a/scripts/docker_build/docker-build.sh b/scripts/docker_build/docker-build.sh new file mode 100755 index 0000000..1090f15 --- /dev/null +++ b/scripts/docker_build/docker-build.sh @@ -0,0 +1,7 @@ +#!/bin/bash +if [ -f "/etc/apt/apt.conf" ]; then + cp /etc/apt/apt.conf ./ +else + touch apt.conf +fi +docker build --build-arg UID=$(id -u) --build-arg host_http_proxy=$http_proxy --build-arg host_https_proxy=$https_proxy -t sof . -- 2.7.4

2 3

[Sound-open-firmware] [PATCH] SSP: refine ssp stop function
by Rander Wang 05 Jun '18

05 Jun '18

merge commit 72e63a467fb8f743 ("apl-ssp: change and wrap status transition into ssp_stop") Signed-off-by: Keyon Jie <yang.jie(a)linux.intel.com> Signed-off-by: Rander Wang <rander.wang(a)linux.intel.com> --- test it on Broadwell, no need to test other platforms SOF: master 131a1887631621 kernel: v4.14 d09db67c5a9d6d SOF-tools: master 13b56fa6047c566a --- src/drivers/hsw-ssp.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/src/drivers/hsw-ssp.c b/src/drivers/hsw-ssp.c index 8e30900..0d74e7d 100644 --- a/src/drivers/hsw-ssp.c +++ b/src/drivers/hsw-ssp.c @@ -437,23 +437,27 @@ static void ssp_start(struct dai *dai, int direction) } /* stop the SSP for either playback or capture */ -static void ssp_stop(struct dai *dai) +static void ssp_stop(struct dai *dai, int direction) { struct ssp_pdata *ssp = dai_get_drvdata(dai); spin_lock(&ssp->lock); - /* stop Rx if we are not capturing */ - if (ssp->state[SOF_IPC_STREAM_CAPTURE] != COMP_STATE_ACTIVE) { + /* stop Rx if neeed */ + if (direction == DAI_DIR_CAPTURE && + ssp->state[SOF_IPC_STREAM_CAPTURE] == COMP_STATE_ACTIVE) { ssp_update_bits(dai, SSCR1, SSCR1_RSRE, 0); ssp_update_bits(dai, SSCR0, SSCR0_RIM, SSCR0_RIM); + ssp->state[SOF_IPC_STREAM_CAPTURE] = COMP_STATE_PAUSED; trace_ssp("Ss0"); } - /* stop Tx if we are not playing */ - if (ssp->state[SOF_IPC_STREAM_PLAYBACK] != COMP_STATE_ACTIVE) { + /* stop Tx if needed */ + if (direction == DAI_DIR_PLAYBACK && + ssp->state[SOF_IPC_STREAM_PLAYBACK] == COMP_STATE_ACTIVE) { ssp_update_bits(dai, SSCR1, SSCR1_TSRE, 0); ssp_update_bits(dai, SSCR0, SSCR0_TIM, SSCR0_TIM); + ssp->state[SOF_IPC_STREAM_PLAYBACK] = COMP_STATE_PAUSED; trace_ssp("Ss1"); } @@ -488,8 +492,7 @@ static int ssp_trigger(struct dai *dai, int cmd, int direction) break; case COMP_TRIGGER_STOP: case COMP_TRIGGER_PAUSE: - ssp->state[direction] = COMP_STATE_PAUSED; - ssp_stop(dai); + ssp_stop(dai, direction); break; case COMP_TRIGGER_RESUME: ssp_context_restore(dai); -- 2.14.1

1 0

[Sound-open-firmware] [PATCH] ipc: protect SOF_IPC_MESSAGE_ID macro parameters
by Pierre-Louis Bossart 04 Jun '18

04 Jun '18

detected with checkpatch.pl --strict: CHECK: Macro argument 'x' may be better as '(x)' to avoid precedence issues Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- src/include/uapi/ipc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/include/uapi/ipc.h b/src/include/uapi/ipc.h index 88de113..fc4ce46 100644 --- a/src/include/uapi/ipc.h +++ b/src/include/uapi/ipc.h @@ -126,7 +126,7 @@ #define SOF_IPC_TRACE_DMA_POSITION SOF_CMD_TYPE(0x002) /* Get message component id */ -#define SOF_IPC_MESSAGE_ID(x) (x & 0xffff) +#define SOF_IPC_MESSAGE_ID(x) ((x) & 0xffff) /* maximum message size for mailbox Tx/Rx */ #define SOF_IPC_MSG_MAX_SIZE 128 -- 2.14.1

1 0

[Sound-open-firmware] [PATCH] platform: separate common API duplicated in platform headers.
by Liam Girdwood 04 Jun '18

04 Jun '18

From: Marcin Maka <marcin.maka(a)linux.intel.com> Common platform API separated to avoid duplicated declarations and indicate public functions implemented by all platforms. Signed-off-by: Marcin Maka <marcin.maka(a)linux.intel.com> # Conflicts: # src/platform/apollolake/include/platform/platform.h # src/platform/baytrail/include/platform/platform.h # src/platform/cannonlake/include/platform/platform.h # src/platform/haswell/include/platform/platform.h --- src/include/sof/panic.h | 4 +- src/include/sof/platform.h | 60 +++++++++++++++++++ .../apollolake/include/platform/platform.h | 15 ++--- .../baytrail/include/platform/platform.h | 8 ++- .../cannonlake/include/platform/platform.h | 14 ++--- .../haswell/include/platform/platform.h | 6 +- 6 files changed, 82 insertions(+), 25 deletions(-) create mode 100644 src/include/sof/platform.h diff --git a/src/include/sof/panic.h b/src/include/sof/panic.h index 3efb659..7c19939 100644 --- a/src/include/sof/panic.h +++ b/src/include/sof/panic.h @@ -58,9 +58,7 @@ static inline void panic_rewind(uint32_t p, uint32_t stack_rewind_frames) p = dump_stack(p, ext_offset, stack_rewind_frames, count * sizeof(uint32_t)); - /* TODO: send IPC oops message to host */ - - /* panic */ + /* panic - send IPC oops message to host */ platform_panic(p); /* flush last trace messages */ diff --git a/src/include/sof/platform.h b/src/include/sof/platform.h new file mode 100644 index 0000000..8b228ee --- /dev/null +++ b/src/include/sof/platform.h @@ -0,0 +1,60 @@ +/* + * Copyright (c) 2018, Intel Corporation + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the Intel Corporation nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * Author: Marcin Maka <marcin.maka(a)linux.intel.com> + */ + +#ifndef __INCLUDE_SOF_PLATFORM_H__ +#define __INCLUDE_SOF_PLATFORM_H__ + +#include <sof/sof.h> + +/* + * APIs declared here are defined for every platform. + */ + +/** + * \brief Platform specific implementation of the On Boot Complete handler. + * \param[in] boot_message Boot status code. + * \return 0 if successful, error code otherwise. + */ +int platform_boot_complete(uint32_t boot_message); + +/** + * \brief Platform initialization entry, called during FW initialization. + * \param[in] sof Context. + * \return 0 if successful, error code otherwise. + */ +int platform_init(struct sof *sof); + +/** + * \brief Called by the panic handler. + * \param[in] p Panic cause, one of SOF_IPC_PANIC_... codes. + */ +static inline void platform_panic(uint32_t p); + +#endif diff --git a/src/platform/apollolake/include/platform/platform.h b/src/platform/apollolake/include/platform/platform.h index aefa9b2..24848ac 100644 --- a/src/platform/apollolake/include/platform/platform.h +++ b/src/platform/apollolake/include/platform/platform.h @@ -27,20 +27,18 @@ * * Author: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> * Keyon Jie <yang.jie(a)linux.intel.com> - * Xiuli Pan <xiuli.pan(a)linux.intel.com> */ #ifndef __PLATFORM_PLATFORM_H__ #define __PLATFORM_PLATFORM_H__ +#include <platform/platcfg.h> #include <platform/shim.h> #include <platform/interrupt.h> #include <uapi/ipc.h> struct sof; -#define MAX_CORE_COUNT 2 - /* Host page size */ #define HOST_PAGE_SIZE 4096 #define PLATFORM_PAGE_TABLE_SIZE 256 @@ -119,16 +117,15 @@ struct sof; #define PLATFORM_NUM_SSP 6 /* Platform defined panic code */ -#define platform_panic(__x) { \ - mailbox_sw_reg_write(SRAM_REG_FW_STATUS, \ - (0xdead000 | (__x)) & 0x3fffffff); \ - ipc_write(IPC_DIPCIE, MAILBOX_EXCEPTION_OFFSET + 2 * 0x20000); \ - ipc_write(IPC_DIPCI, 0x80000000 | ((0xdead000 | (__x)) & 0x3fffffff)); \ +static inline void platform_panic(uint32_t p) +{ + sw_reg_write(SRAM_REG_FW_STATUS, p & 0x3fffffff); + ipc_write(IPC_DIPCI, 0x80000000 | (p & 0x3fffffff)); } /* Platform defined trace code */ #define platform_trace_point(__x) \ - mailbox_sw_reg_write(SRAM_REG_FW_TRACEP, (__x)) + sw_reg_write(SRAM_REG_FW_TRACEP, __x) extern struct timer *platform_timer; diff --git a/src/platform/baytrail/include/platform/platform.h b/src/platform/baytrail/include/platform/platform.h index 6a7ebc9..d4d4710 100644 --- a/src/platform/baytrail/include/platform/platform.h +++ b/src/platform/baytrail/include/platform/platform.h @@ -33,6 +33,7 @@ #ifndef __PLATFORM_PLATFORM_H__ #define __PLATFORM_PLATFORM_H__ +#include <sof/platform.h> #include <platform/shim.h> #include <platform/interrupt.h> #include <uapi/ipc.h> @@ -102,9 +103,10 @@ struct sof; #define PLATFORM_IDLE_TIME 750000 /* Platform defined panic code */ -#define platform_panic(__x) { \ - shim_write(SHIM_IPCDL, (0xdead000 | (__x & 0xfff))); \ - shim_write(SHIM_IPCDH, (SHIM_IPCDH_BUSY | MAILBOX_EXCEPTION_OFFSET)); \ +static inline void platform_panic(uint32_t p) +{ + shim_write(SHIM_IPCDL, p); + shim_write(SHIM_IPCDH, SHIM_IPCDH_BUSY); } /* Platform defined trace code */ diff --git a/src/platform/cannonlake/include/platform/platform.h b/src/platform/cannonlake/include/platform/platform.h index 35219d7..9474103 100644 --- a/src/platform/cannonlake/include/platform/platform.h +++ b/src/platform/cannonlake/include/platform/platform.h @@ -34,6 +34,8 @@ #ifndef __PLATFORM_PLATFORM_H__ #define __PLATFORM_PLATFORM_H__ +#include <sof/platform.h> +#include <platform/platcfg.h> #include <platform/shim.h> #include <platform/interrupt.h> #include <uapi/ipc.h> @@ -116,17 +118,15 @@ struct sof; #define PLATFORM_IDLE_TIME 750000 /* Platform defined trace code */ -#define platform_panic(__x) { \ - mailbox_sw_reg_write(SRAM_REG_FW_STATUS, \ - (0xdead000 | (__x)) & 0x3fffffff); \ - ipc_write(IPC_DIPCIDD, MAILBOX_EXCEPTION_OFFSET + 2 * 0x20000); \ - ipc_write(IPC_DIPCIDR, 0x80000000 | \ - ((0xdead000 | (__x)) & 0x3fffffff)); \ +static inline void platform_panic(uint32_t p) +{ + sw_reg_write(SRAM_REG_FW_STATUS, p & 0x3fffffff); + ipc_write(IPC_DIPCIDR, 0x80000000 | (p & 0x3fffffff)); } /* Platform defined trace code */ #define platform_trace_point(__x) \ - mailbox_sw_reg_write(SRAM_REG_FW_TRACEP, (__x)) + sw_reg_write(SRAM_REG_FW_TRACEP, __x) extern struct timer *platform_timer; diff --git a/src/platform/haswell/include/platform/platform.h b/src/platform/haswell/include/platform/platform.h index d30f329..426f538 100644 --- a/src/platform/haswell/include/platform/platform.h +++ b/src/platform/haswell/include/platform/platform.h @@ -101,9 +101,9 @@ struct sof; #define PLATFORM_IDLE_TIME 750000 /* Platform defined panic code */ -#define platform_panic(__x) { \ - shim_write(SHIM_IPCX, MAILBOX_EXCEPTION_OFFSET & 0x3fffffff); \ - shim_write(SHIM_IPCD, (SHIM_IPCD_BUSY | 0xdead000 | __x)); \ +static inline void platform_panic(uint32_t p) +{ + shim_write(SHIM_IPCD, (SHIM_IPCD_BUSY | p)) } /* Platform defined trace code */ -- 2.17.0

1 1

[Sound-open-firmware] [PATCH] SOFT: Add SRC coefficients generate tool
by Seppo Ingalsuo 04 Jun '18

04 Jun '18

This patch adds the scripts src_std_int32.m and src_tiny_int16.m those were used to create the conversions matrices for the default and tiny profiles. The scripts call the included src_generate function that does the task with help from the filter design and coefficients export utilities. The quality and resources consumption of SRC can be customized with this tool. Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> --- tune/src/README | 36 +++++ tune/src/src_export_coef.m | 212 ++++++++++++++++++++++++++++ tune/src/src_export_defines.m | 66 +++++++++ tune/src/src_export_table_2s.m | 190 +++++++++++++++++++++++++ tune/src/src_factor1_lm.m | 44 ++++++ tune/src/src_factor2_lm.m | 155 ++++++++++++++++++++ tune/src/src_find_l0m0.m | 71 ++++++++++ tune/src/src_generate.m | 311 +++++++++++++++++++++++++++++++++++++++++ tune/src/src_get.m | 254 +++++++++++++++++++++++++++++++++ tune/src/src_param.m | 87 ++++++++++++ tune/src/src_std_int32.m | 30 ++++ tune/src/src_tiny_int16.m | 41 ++++++ 12 files changed, 1497 insertions(+) create mode 100644 tune/src/README create mode 100644 tune/src/src_export_coef.m create mode 100644 tune/src/src_export_defines.m create mode 100644 tune/src/src_export_table_2s.m create mode 100644 tune/src/src_factor1_lm.m create mode 100644 tune/src/src_factor2_lm.m create mode 100644 tune/src/src_find_l0m0.m create mode 100644 tune/src/src_generate.m create mode 100644 tune/src/src_get.m create mode 100644 tune/src/src_param.m create mode 100644 tune/src/src_std_int32.m create mode 100644 tune/src/src_tiny_int16.m diff --git a/tune/src/README b/tune/src/README new file mode 100644 index 0000000..e135f9a --- /dev/null +++ b/tune/src/README @@ -0,0 +1,36 @@ +Sample rate converter (SRC) Setup Tools +======================================= + +This is a tool to set up SRC conversions sample rates list, define +quality related parameters, and test the C implementation for a number +of objective audio quality parameters. + +The tools need GNU Octave version 4.0.0 or later with octave-signal +package. + +src_std_int32.m +--------------- + +This script creates the default coefficient set and contains nothing +else but call for src_generate. + +src_tiny_int16.m +---------------- + +This script creates the tiny coefficient set. The script contains an +example how to customize the input/output rates matrix and in a simple +way the scale conversions quality. More controlled quality adjust can +be done by editing file src_param.m directly. Note that int16 +presentation for SRC coefficients will degrade even the default +quality. + +src_generate.m +-------------- + +Creates the header files to include to C into directory "include". A +report of create modes is written to directory "reports". The +coefficients need to be copied to directory +sof.git/src/include/sof/audio/coefficients/src. + +The default quality of SRC is defined in module src_param.m. The +quality impacts the complexity and coefficents tables size of SRC. diff --git a/tune/src/src_export_coef.m b/tune/src/src_export_coef.m new file mode 100644 index 0000000..f6fdbb4 --- /dev/null +++ b/tune/src/src_export_coef.m @@ -0,0 +1,212 @@ +function success=src_export_coef(src, ctype, vtype, hdir, profile) + +% src_export_coef - Export FIR coefficients +% +% success=src_export_coef(src, ctype, hdir, profile) +% +% src - src definition struct +% ctype - 'float','int32', or 'int24' +% vtype - 'float','int32_t' +% hdir - directory for header files +% profile - string to append to filename +% + +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +if nargin < 5 + profile = ''; +end + +if src.L == src.M + success = 0; +else + pbi = round(src.c_pb*1e4); + sbi = round(src.c_sb*1e4); + if isempty(profile) + hfn = sprintf('%s/src_%s_%d_%d_%d_%d.h', ... + hdir, ctype, src.L, src.M, pbi, sbi); + else + hfn = sprintf('%s/src_%s_%s_%d_%d_%d_%d.h', ... + hdir, profile, ctype, src.L, src.M, pbi, sbi); + end + vfn = sprintf('src_%s_%d_%d_%d_%d_fir', ctype, src.L, src.M, pbi, sbi); + sfn = sprintf('src_%s_%d_%d_%d_%d', ctype, src.L, src.M, pbi, sbi); + + fprintf('Exporting %s ...\n', hfn); + fh = fopen(hfn, 'w'); + + switch ctype + case 'float' + fprintf(fh, 'const %s %s[%d] = {\n', ... + vtype, vfn, src.filter_length); + fprintf(fh,'\t%16.9e', src.coefs(1)); + for n=2:src.filter_length + fprintf(fh, ',\n'); + fprintf(fh,'\t%16.9e', src.coefs(n)); + end + fprintf(fh,'\n\n};'); + case 'int32' + print_int_coef(src, fh, vtype, vfn, 32); + case 'int24' + print_int_coef(src, fh, vtype, vfn, 24); + case 'int16' + print_int_coef(src, fh, vtype, vfn, 16); + otherwise + error('Unknown type %s !!!', ctype); + end + + fprintf(fh, '\n'); + switch ctype + case 'float' + fprintf(fh, 'struct src_stage %s = {\n', sfn); + fprintf(fh, '\t%d, %d, %d, %d, %d, %d, %d, %d, %f,\n\t%s};\n', ... + src.idm, src.odm, src.num_of_subfilters, ... + src.subfilter_length, src.filter_length, ... + src.blk_in, src.blk_out, src.halfband, ... + src.gain, vfn); + case { 'int16' 'int24' 'int32' } + fprintf(fh, 'struct src_stage %s = {\n', sfn); + fprintf(fh, '\t%d, %d, %d, %d, %d, %d, %d, %d, %d,\n\t%s};\n', ... + src.idm, src.odm, src.num_of_subfilters, ... + src.subfilter_length, src.filter_length, ... + src.blk_in, src.blk_out, src.halfband, ... + src.shift, vfn); + otherwise + error('Unknown type %s !!!', ctype); + end + %fprintf(fh, '\n'); + fclose(fh); + success = 1; +end + +end + +function print_int_coef(src, fh, vtype, vfn, nbits) + fprintf(fh, 'const %s %s[%d] = {\n', ... + vtype, vfn, src.filter_length); + + cint = coef_quant(src, nbits); + fprintf(fh,'\t%d', cint(1)); + for n=2:src.filter_length + fprintf(fh, ',\n'); + fprintf(fh,'\t%d', cint(n)); + end + fprintf(fh,'\n\n};'); +end + +function cint = coef_quant(src, nbits) + + sref = 2^(nbits-1); + pmax = sref-1; + nmin = -sref; + + if nbits > 16 + %% Round() is OK + cint0 = round(sref*src.coefs); + else + %% Prepare to optimize coefficient quantization + fs = max(src.fs1, src.fs2); + f = linspace(0, fs/2, 1000); + + %% Test sensitivity for stopband and find the most sensitive + % coefficients + sbf = linspace(src.f_sb,fs/2, 500); + n = src.filter_length; + psens = zeros(1,n); + bq0 = round(sref*src.coefs); + h = freqz(bq0/sref/src.L, 1, sbf, fs); + sb1 = 20*log10(sqrt(sum(h.*conj(h)))); + for i=1:n + bq = src.coefs; + bq(i) = round(sref*bq(i))/sref; + %tbq = bq; %tbq(i) = bq(i)+1; + h = freqz(bq, 1, sbf, fs); + psens(i) = sum(h.*conj(h)); + end + [spsens, pidx] = sort(psens, 'descend'); + + %% Test quantization in the found order + % The impact to passband is minimal so it's not tested + bi = round(sref*src.coefs); + bi0 = bi; + dl = -1:1; + nd = length(dl); + msb = zeros(1,nd); + for i=pidx + bit = bi; + for j=1:nd + bit(i) = bi(i) + dl(j); + h = freqz(bit, 1, sbf, fs); + msb(j) = sum(h.*conj(h)); + end + idx = find(msb == min(msb), 1, 'first'); + bi(i) = bi(i) + dl(idx); + end + h = freqz(bi/sref/src.L, 1, sbf, fs); + sb2 = 20*log10(sqrt(sum(h.*conj(h)))); + + %% Plot to compare + if 0 + f = linspace(0, fs/2, 1000); + h1 = freqz(src.coefs/src.L, 1, f, fs); + h2 = freqz(bq0/sref/src.L, 1, f, fs); + h3 = freqz(bi/sref/src.L, 1, f, fs); + figure; + plot(f, 20*log10(abs(h1)), f, 20*log10(abs(h2)), f, 20*log10(abs(h3))); + grid on; + fprintf('Original = %4.1f dB, optimized = %4.1f dB, delta = %4.1f dB\n', ... + sb1, sb2, sb1-sb2); + end + cint0 = bi; + end + + + %% Re-order coefficients for filter implementation + cint = zeros(src.filter_length,1); + for n = 1:src.num_of_subfilters + i11 = (n-1)*src.subfilter_length+1; + i12 = i11+src.subfilter_length-1; + cint(i11:i12) = cint0(n:src.num_of_subfilters:end); + end + + %% Done check for no overflow + max_fix = max(cint); + min_fix = min(cint); + if (max_fix > pmax) + printf('Fixed point coefficient %d exceeded %d\n.', max_fix, pmax); + error('Something went wrong!'); + end + if (min_fix < nmin) + printf('Fixed point coefficient %d exceeded %d\n.', min_fix, nmax); + error('Something went wrong!'); + end + + +end diff --git a/tune/src/src_export_defines.m b/tune/src/src_export_defines.m new file mode 100644 index 0000000..63fb4c2 --- /dev/null +++ b/tune/src/src_export_defines.m @@ -0,0 +1,66 @@ +function src_export_defines(defs, ctype, hdir, profile) + +% src_export_defines - Exports the constants to header files +% +% src_export_defines(defs, ctype, hdir) +% +% defs - defs struct +% ctype - e.g. 'int24' appended to file name +% hdir - directory for header file +% profile - string to append to file name +% + + +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +if nargin < 4 + profile = ''; +end + +if isempty(profile) + hfn = sprintf('src_%s_define.h', ctype); +else + hfn = sprintf('src_%s_%s_define.h', profile, ctype); +end +fh = fopen(fullfile(hdir,hfn), 'w'); +fprintf(fh, '/* SRC constants */\n'); +fprintf(fh, '#define MAX_FIR_DELAY_SIZE %d\n', defs.fir_delay_size); +fprintf(fh, '#define MAX_OUT_DELAY_SIZE %d\n', defs.out_delay_size); +fprintf(fh, '#define MAX_BLK_IN %d\n', defs.blk_in); +fprintf(fh, '#define MAX_BLK_OUT %d\n', defs.blk_out); +fprintf(fh, '#define NUM_IN_FS %d\n', defs.num_in_fs); +fprintf(fh, '#define NUM_OUT_FS %d\n', defs.num_out_fs); +fprintf(fh, '#define STAGE1_TIMES_MAX %d\n', defs.stage1_times_max); +fprintf(fh, '#define STAGE2_TIMES_MAX %d\n', defs.stage2_times_max); +fprintf(fh, '#define STAGE_BUF_SIZE %d\n', defs.stage_buf_size); +fprintf(fh, '#define NUM_ALL_COEFFICIENTS %d\n', defs.sum_filter_lengths); +fclose(fh); + +end diff --git a/tune/src/src_export_table_2s.m b/tune/src/src_export_table_2s.m new file mode 100644 index 0000000..7772b93 --- /dev/null +++ b/tune/src/src_export_table_2s.m @@ -0,0 +1,190 @@ +function sfl = src_export_table_2s(fs_in, fs_out, l_2s, m_2s, ... + pb_2s, sb_2s, taps_2s, ctype, vtype, ppath, hdir, profile) + +% src_export_table_2s - Export src setup table +% +% src_export_table_2s(fs_in, fs_out, l, m, pb, sb, ctype, vtype, hdir, profile) +% +% The parameters are used to differentiate files for possibly many same +% conversion factor filters with possibly different characteristic. +% +% fs_in - input sample rates +% fs_out - output sample rates +% l - interpolation factors +% m - decimation factors +% pb - passband widths +% sb - stopband start frequencies +% ctype - coefficient quantization +% vtype - C variable type +% ppath - print directory prefix to header file name include +% hdir - directory for header files +% profile - string to append to file name +% + +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +if nargin < 12 + profile = ''; +end + +if isempty(profile) + hfn = sprintf('src_%s_table.h', ctype); +else + hfn = sprintf('src_%s_%s_table.h', profile, ctype); +end +fh = fopen(fullfile(hdir,hfn), 'w'); + +fprintf(fh, '/* SRC conversions */\n'); +sfl = 0; +n_in = length(fs_in); +n_out = length(fs_out); +i=1; +all_modes = zeros(2*n_in*n_out, 7); +for n=1:2 + for b=1:n_out + for a=1:n_in + all_modes(i,:) = [ l_2s(n,a,b) m_2s(n,a,b) ... + pb_2s(n,a,b) sb_2s(n,a,b) n a b ]; + i=i+1; + end + end +end + +all_modes_sub = all_modes(:,1:4); +[unique_modes, ia] = unique(all_modes_sub,'rows'); +sm = size(unique_modes); + +if isempty(profile) + prof_ctype = ctype; +else + prof_ctype = sprintf('%s_%s', profile, ctype); +end +for i=1:sm(1) + um_tmp = unique_modes(i,:); + if isequal(um_tmp(1:2),[1 1]) || isequal(um_tmp(1:2),[0 0]) + else + fprintf(fh, '#include <%ssrc_%s_%d_%d_%d_%d.h>\n', ... + ppath, prof_ctype, um_tmp(1:4)); + + n = all_modes(ia(i), 5); + a = all_modes(ia(i), 6); + b = all_modes(ia(i), 7); + sfl = sfl +taps_2s(n, a, b); % Count sum of filter lengths + end +end +fprintf(fh,'\n'); + +fprintf(fh, '/* SRC table */\n'); +switch ctype + case 'float' + fprintf(fh, '%s fir_one = 1.0;\n', vtype); + fprintf(fh, 'struct src_stage src_double_1_1_0_0 = { 0, 0, 1, 1, 1, 1, 1, 0, 1.0, &fir_one };\n'); + fprintf(fh, 'struct src_stage src_double_0_0_0_0 = { 0, 0, 0, 0, 0, 0, 0, 0, 0.0, &fir_one };\n'); + case 'int16' + scale16 = 2^15; + fprintf(fh, '%s fir_one = %d;\n', vtype, round(scale16*0.5)); + fprintf(fh, 'struct src_stage src_int16_1_1_0_0 = { 0, 0, 1, 1, 1, 1, 1, 0, -1, &fir_one };\n'); + fprintf(fh, 'struct src_stage src_int16_0_0_0_0 = { 0, 0, 0, 0, 0, 0, 0, 0, 0, &fir_one };\n'); + case 'int24' + scale24 = 2^23; + fprintf(fh, '%s fir_one = %d;\n', vtype, round(scale24*0.5)); + fprintf(fh, 'struct src_stage src_int24_1_1_0_0 = { 0, 0, 1, 1, 1, 1, 1, 0, -1, &fir_one };\n'); + fprintf(fh, 'struct src_stage src_int24_0_0_0_0 = { 0, 0, 0, 0, 0, 0, 0, 0, 0, &fir_one };\n'); + case 'int32' + scale32 = 2^31; + fprintf(fh, '%s fir_one = %d;\n', vtype, round(scale32*0.5)); + fprintf(fh, 'struct src_stage src_int32_1_1_0_0 = { 0, 0, 1, 1, 1, 1, 1, 0, -1, &fir_one };\n'); + fprintf(fh, 'struct src_stage src_int32_0_0_0_0 = { 0, 0, 0, 0, 0, 0, 0, 0, 0, &fir_one };\n'); + otherwise + error('Unknown coefficient type!'); +end + +fprintf(fh, 'int src_in_fs[%d] = {', n_in); +j = 1; +for i=1:n_in + fprintf(fh, ' %d', fs_in(i)); + if i < n_in + fprintf(fh, ','); + end + j = j + 1; + if (j > 8) + fprintf(fh, '\n\t'); + j = 1; + end +end +fprintf(fh, '};\n'); + +fprintf(fh, 'int src_out_fs[%d] = {', n_out); +j = 1; +for i=1:n_out + fprintf(fh, ' %d', fs_out(i)); + if i < n_out + fprintf(fh, ','); + end + j = j + 1; + if (j > 8) + fprintf(fh, '\n\t'); + j = 1; + end +end +fprintf(fh, '};\n'); + +for n = 1:2 + fprintf(fh, 'struct src_stage *src_table%d[%d][%d] = {\n', ... + n, n_out, n_in); + i = 1; + for b = 1:n_out + fprintf(fh, '\t{'); + for a = 1:n_in + fprintf(fh, ' &src_%s_%d_%d_%d_%d', ... + ctype, l_2s(n,a,b), m_2s(n,a,b), ... + pb_2s(n,a,b), sb_2s(n,a,b)); + if a < n_in + fprintf(fh, ','); + end + i = i + 1; + if i > 2 + fprintf(fh, '\n\t'); + i = 1; + end + end + fprintf(fh, '}'); + if b < n_out + fprintf(fh, ',\n'); + else + fprintf(fh, '\n'); + end + end + fprintf(fh, '};\n'); +end + +fclose(fh); + +end diff --git a/tune/src/src_factor1_lm.m b/tune/src/src_factor1_lm.m new file mode 100644 index 0000000..54e9173 --- /dev/null +++ b/tune/src/src_factor1_lm.m @@ -0,0 +1,44 @@ +function [l, m] = src_factor1_lm(fs1, fs2) + +% factor1_lm - factorize input and output sample rates ratio to fraction l/m +% +% [l, m] = factor1_lm(fs1, fs2) +% +% fs1 - input sample rate +% fs2 - output sample rate +% + +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +k = gcd(fs1, fs2); +l = fs2/k; +m = fs1/k; + +end diff --git a/tune/src/src_factor2_lm.m b/tune/src/src_factor2_lm.m new file mode 100644 index 0000000..6ac8602 --- /dev/null +++ b/tune/src/src_factor2_lm.m @@ -0,0 +1,155 @@ +function [l1, m1, l2, m2] = src_factor2_lm(fs1, fs2) + +% factor2_lm - factorize input and output sample rates ratio to fraction l1/m2*l2/m2 +% +% [l1, m1, l2, m2] = factor2_lm(fs1, fs2) +% +% fs1 - input sample rate +% fs2 - output sample rate +% + +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + + +%% The same sample rate? +if abs(fs1-fs2) < eps + l1 = 1; m1 = 1; l2 = 1; m2 = 1; + return +end + +%% Find fraction, and factorize +k = gcd(fs1, fs2); +l = fs2/k; +m = fs1/k; +[l01, l02] = factor2(l); +[m01, m02] = factor2(m); + +%% Hand fixing for some ratios, guide to reuse some common filters +if (l==147) && (m==640) + l01 = 7; m01 = 8; l02 = l/l01; m02 = m/m01; % 192 to 44.1 +end +if (l==147) && (m==320) + l01 = 7; m01 = 8; l02 = l/l01; m02 = m/m01; % 96 to 44.1 +end +if (l==147) && (m==160) + l01 = 7; m01 = 8; l02 = l/l01; m02 = m/m01; % 48 to 44.1 +end +if (l==160) && (m==147) + l01 = 8; m01 = 7; l02 = l/l01; m02 = m/m01; % 44.1 to 48 +end +if (l==320) && (m==147) + l01 = 8; m01 = 7; l02 = l/l01; m02 = m/m01; % 44.1 to 96 +end +if (l==4) && (m==3) + l01 = 4; m01 = 3; l02 = l/l01; m02 = m/m01; % 24 to 32, no 2 stage +end +if (l==3) && (m==4) + l01 = 3; m01 = 4; l02 = l/l01; m02 = m/m01; % 24 to 32, no 2 stage +end + + +r11 = l01/m01; +r22 = l02/m02; +r12 = l01/m02; +r21 = l02/m01; +fs3 = [r11 r12 r21 r22].*fs1; + + +if fs1 > fs2 % Decrease sample rate, dont go below output rate + idx = find(fs3 >= fs2); + if length(idx) < 1 + error('Cant factorise interpolations'); + end + fs3_possible = fs3(idx); + delta = fs3_possible-fs2; % Fs3 that is nearest to fs2 + idx = find(delta == min(delta), 1, 'first'); + fs3_min = fs3_possible(idx); + idx = find(fs3 == fs3_min, 1, 'first'); + switch idx + case 1, l1 = l01; m1 = m01; l2 = l02; m2 = m02; + case 2, l1 = l01; m1 = m02; l2 = l02; m2 = m01; + case 3, l1 = l02; m1 = m01; l2 = l01; m2 = m02; + case 4, l1 = l02; m1 = m02; l2 = l01; m2 = m01; + end +else % Increase sample rate, don't go below input rate + idx = find(fs3 >= fs1); + if length(idx) < 1 + error('Cant factorise interpolations'); + end + fs3_possible = fs3(idx); + delta = fs3_possible-fs1; % Fs2 that is nearest to fs1 + idx = find(delta == min(delta), 1, 'first'); + fs3_min = fs3_possible(idx); + idx = find(fs3 == fs3_min, 1, 'first'); + switch idx + case 1, l1 = l01; m1 = m01; l2 = l02; m2 = m02; + case 2, l1 = l01; m1 = m02; l2 = l02; m2 = m01; + case 3, l1 = l02; m1 = m01; l2 = l01; m2 = m02; + case 4, l1 = l02; m1 = m02; l2 = l01; m2 = m01; + end +end + +%% If 1st stage is 1:1 +if (l1 == 1) && (m1 == 1) + l1 = l2; + m1 = m2; + l2 = 1; + m2 = 1; +end + +f1=l/m; +f2=l1/m1*l2/m2; +if abs(f1 - f2) > 1e-6 + error('Bug in factorization code!'); +end + +end + + +function [a, b]=factor2(c) +x = round(sqrt(c)); +t1 = x:2*x; +d1 = c./t1; +idx1 = find(d1 == floor(d1), 1, 'first'); +a1 = t1(idx1); +t2 = x:-1:floor(x/2); +d2 = c./t2; +idx2 = find(d2 == floor(d2), 1, 'first'); +a2 = t2(idx2); +if (a1-x) < (x-a2) + a = a1; +else + a = a2; +end +b = c/a; +end + + + diff --git a/tune/src/src_find_l0m0.m b/tune/src/src_find_l0m0.m new file mode 100644 index 0000000..2a360a3 --- /dev/null +++ b/tune/src/src_find_l0m0.m @@ -0,0 +1,71 @@ +function [l0, m0] = src_find_l0m0(L, M) + +% find_l0m0 - find l0, m0 to meet -l0*L + m0*M == 1 +% +% [l0, m0] = find_l0m0(L, M) +% +% L - interpolatation factor +% M - decimation factor +% + +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +if M == 1 + l0 = 0; + m0 = 1; + return +end + +if L == 1 + l0 = 1; + m0 = 0; + return +end + +l0 = []; +m0 = []; +for lt=1:4*L + mt = (1+lt*L)/M; % Check if -lt*L + mt*M == 1 + if floor(mt) == mt + l0 = [l0 lt]; + m0 = [m0 mt]; + end +end + +s = l0+m0; +idx = find(s == min(s), 1, 'first'); +l0 = l0(idx); +m0 = m0(idx); + +if -l0*L + m0*M ~= 1 + error('Something went wrong!'); +end + +end diff --git a/tune/src/src_generate.m b/tune/src/src_generate.m new file mode 100644 index 0000000..b01b29d --- /dev/null +++ b/tune/src/src_generate.m @@ -0,0 +1,311 @@ +function src_generate(fs_in, fs_out, ctype, fs_inout, profile, qc) + +% src_generate - export src conversions for given fs_in and fs_out +% +% src_generate(fs_in, fs_out <, ctype, fs_inout>>) +% +% fs_in - vector of input sample rates (M) +% fs_out - vector of output sample rates (N) +% ctype - coefficient type, use 'int16','int24', 'int32', or 'float' +% fs_inout - matrix of supported conversions (MxN), +% 0 = no support, 1 = supported +% % +% if ctype is omitted then ctype defaults to 'int16'. +% +% If fs_inout matrix is omitted this script will compute coefficients +% for all fs_in <-> fs_out combinations. +% +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +if (nargin == 1) || (nargin > 6) + error('Incorrect arguments for function!'); +end +if nargin == 0 + %% Default input and output rates + fs_in = [8e3 11025 12e3 16e3 18900 22050 24e3 32e3 44100 48e3 ... + 64e3 88.2e3 96e3 176400 192e3]; + + fs_out = [8e3 11025 12e3 16e3 18900 22050 24e3 32e3 44100 48e3]; + + fs_inout = [ 0 0 0 1 0 0 1 1 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 1 0 0 0 0 0 1 1 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 1 0 0 1 0 0 0 1 0 1 ; ... + 1 0 0 1 0 0 1 0 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 1 1 1 1 0 1 1 1 1 0 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ; ... + 0 0 0 0 0 0 0 0 0 1 ]; + + ctype = 'int32'; + profile = 'std'; + qc = 1.0; +else + if nargin < 3 + ctype = 'int16'; + end + if nargin < 4 + fs_inout = ones(length(fs_in), length(fs_out)); + end + if nargin < 5 + profile = ''; + end + if nargin < 6 + qc = 1.0; + end +end + +sio = size(fs_inout); +if (length(fs_in) ~= sio(1)) || (length(fs_out) ~= sio(2)) + error('Sample rates in/out matrix size mismatch!'); +end + +%% Exported coefficients type int16, int24, int32, float + +switch ctype + case 'int16' + coef_label = 'int16'; + coef_ctype = 'int16_t'; + coef_bits = 16; + coef_bytes = 2; + case 'int24' + coef_label = 'int24'; + coef_ctype = 'int32_t'; + coef_bits = 24; + coef_bytes = 4; + case 'int32' + coef_label = 'int32'; + coef_ctype = 'int32_t'; + coef_bits = 32; + coef_bytes = 4; + case 'float' + coef_label = 'float'; coef_ctype = 'float'; + coef_bits = 24; + coef_bytes = 4; + otherwise + error('Request for incorrect coefficient type'); +end +data_bytes = 4; + +hdir = mkdir_check('include'); +rdir = mkdir_check('reports'); + +%% Find fractional conversion factors +nfsi = length(fs_in); +nfso = length(fs_out); +l_2s = zeros(2, nfsi, nfso); +m_2s = zeros(2, nfsi, nfso); +mops_2s = zeros(2, nfsi, nfso); +pb_2s = zeros(2,nfsi, nfso); +sb_2s = zeros(2,nfsi, nfso); +taps_2s = zeros(2,nfsi, nfso); +defs.fir_delay_size = 0; +defs.out_delay_size = 0; +defs.blk_in = 0; +defs.blk_out = 0; +defs.num_in_fs = nfsi; +defs.num_out_fs = nfso; +defs.stage1_times_max = 0; +defs.stage2_times_max = 0; +defs.stage_buf_size = 0; +h = 1; +for b = 1:nfso + for a = 1:nfsi + fs1 = fs_in(a); + fs2 = fs_out(b); + [l1, m1, l2, m2] = src_factor2_lm(fs1, fs2); + fs3 = fs1*l1/m1; + cnv1 = src_param(fs1, fs3, coef_bits, qc); + cnv2 = src_param(fs3, fs2, coef_bits, qc); + if (fs2 < fs1) + % When decimating 1st stage passband can be limited + % for wider transition band + f_pb = fs2*cnv2.c_pb; + cnv1.c_pb = f_pb/min(fs1,fs3); + end + if (fs2 > fs1) + % When interpolating 2nd stage passband can be limited + % for wider transition band + f_pb = fs1*cnv1.c_pb; + cnv2.c_pb = f_pb/min(fs2,fs3); + end + if fs_inout(a,b) > 0 || (a == b) + if cnv2.fs1-cnv2.fs2 > eps + % Allow half ripple for dual stage SRC parts + cnv1.rp = cnv1.rp/2; + cnv2.rp = cnv2.rp/2; + end + src1 = src_get(cnv1); + src2 = src_get(cnv2); + k = gcd(src1.blk_out, src2.blk_in); + stage1_times = src2.blk_in/k; + stage2_times = stage1_times*src1.blk_out/src2.blk_in; + defs.stage1_times_max = max(defs.stage1_times_max, stage1_times); + defs.stage2_times_max = max(defs.stage2_times_max, stage2_times); + l_2s(:,a,b) = [src1.L src2.L]; + m_2s(:,a,b) = [src1.M src2.M]; + mops_2s(:,a,b) = [src1.MOPS src2.MOPS]; + pb_2s(:,a,b) = [round(1e4*src1.c_pb) round(1e4*src2.c_pb)]; + sb_2s(:,a,b) = [round(1e4*src1.c_sb) round(1e4*src2.c_sb)]; + taps_2s(:,a,b) = [src1.filter_length src2.filter_length]; + defs.fir_delay_size = max(defs.fir_delay_size, src1.fir_delay_size); + defs.out_delay_size = max(defs.out_delay_size, src1.out_delay_size); + defs.blk_in = max(defs.blk_in, src1.blk_in); + defs.blk_out = max(defs.blk_out, src1.blk_out); + defs.fir_delay_size = max(defs.fir_delay_size, src2.fir_delay_size); + defs.out_delay_size = max(defs.out_delay_size, src2.out_delay_size); + defs.blk_in = max(defs.blk_in, src2.blk_in); + defs.blk_out = max(defs.blk_out, src2.blk_out); + defs.stage_buf_size = max(defs.stage_buf_size, src1.blk_out*stage1_times); + src_export_coef(src1, coef_label, coef_ctype, hdir, profile); + src_export_coef(src2, coef_label, coef_ctype, hdir, profile); + end + end +end + +%% Export modes table +defs.sum_filter_lengths = src_export_table_2s(fs_in, fs_out, l_2s, m_2s, ... + pb_2s, sb_2s, taps_2s, coef_label, coef_ctype, ... + 'sof/audio/coefficients/src/', hdir, profile); +src_export_defines(defs, coef_label, hdir, profile); + +%% Print 2 stage conversion factors +fn = sprintf('%s/src_2stage.txt', rdir); +fh = fopen(fn,'w'); +fprintf(fh,'\n'); +fprintf(fh,'Dual stage fractional SRC: Ratios\n'); +fprintf(fh,'%8s, ', 'in \ out'); +for b = 1:nfso + fprintf(fh,'%12.1f, ', fs_out(b)/1e3); +end +fprintf(fh,'\n'); +for a = 1:nfsi + fprintf(fh,'%8.1f, ', fs_in(a)/1e3); + for b = 1:nfso + cstr = print_ratios(l_2s, m_2s, a, b); + fprintf(fh,'%12s, ', cstr); + end + fprintf(fh,'\n'); +end +fprintf(fh,'\n'); + +%% Print 2 stage MOPS +fprintf(fh,'Dual stage fractional SRC: MOPS\n'); +fprintf(fh,'%8s, ', 'in \ out'); +for b = 1:nfso + fprintf(fh,'%8.1f, ', fs_out(b)/1e3); +end +fprintf(fh,'\n'); +for a = 1:nfsi + fprintf(fh,'%8.1f, ', fs_in(a)/1e3); + for b = 1:nfso + mops = sum(mops_2s(:,a,b)); + if sum(l_2s(:,a,b)) < eps + mops_str = 'x'; + else + mops_str = sprintf('%.2f', mops); + end + fprintf(fh,'%8s, ', mops_str); + end + fprintf(fh,'\n'); +end +fprintf(fh,'\n'); + +%% Print 2 stage MOPS per stage +fprintf(fh,'Dual stage fractional SRC: MOPS per stage\n'); +fprintf(fh,'%10s, ', 'in \ out'); +for b = 1:nfso + fprintf(fh,'%10.1f, ', fs_out(b)/1e3); +end +fprintf(fh,'\n'); +for a = 1:nfsi + fprintf(fh,'%10.1f, ', fs_in(a)/1e3); + for b = 1:nfso + mops = mops_2s(:,a,b); + if sum(l_2s(:,a,b)) < eps + mops_str = 'x'; + else + mops_str = sprintf('%.2f+%.2f', mops(1), mops(2)); + end + fprintf(fh,'%10s, ', mops_str); + end + fprintf(fh,'\n'); +end +fprintf(fh,'\n'); + +fprintf(fh,'Coefficient RAM %.1f kB\n', ... + defs.sum_filter_lengths*coef_bytes/1024); +fprintf(fh,'Max. data RAM %.1f kB\n', ... + (defs.fir_delay_size + defs.out_delay_size+defs.stage_buf_size) ... + * data_bytes/1024); + +fprintf(fh,'\n'); +fclose(fh); +type(fn); + +end + +function d = mkdir_check(d) +if exist(d) ~= 7 + mkdir(d); +end +end + +function cstr = print_ratios(l_2s, m_2s, a, b) +l1 = l_2s(1,a,b); +m1 = m_2s(1,a,b); +l2 = l_2s(2,a,b); +m2 = m_2s(2,a,b); +if l1+m2+l2+m2 == 0 + cstr = 'x'; +else + if m2 == 1 + if l2 == 1 + cstr2 = ''; + else + cstr2 = sprintf('*%d', l2); + end + else + cstr2 = sprintf('*%d/%d', l2, m2); + end + if m1 == 1 + cstr1 = sprintf('%d', l1); + else + cstr1 = sprintf('%d/%d', l1, m1); + end + cstr = sprintf('%s%s', cstr1, cstr2); +end +end diff --git a/tune/src/src_get.m b/tune/src/src_get.m new file mode 100644 index 0000000..4520af9 --- /dev/null +++ b/tune/src/src_get.m @@ -0,0 +1,254 @@ +function src = src_get(cnv) + +% src_get - calculate coefficients for a src +% +% src = src_get(cnv); +% +% cnv - src parameters +% src - src result +% + +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +use_firpm = 0; +use_remez = 0; +use_kaiser = 0; +switch lower(cnv.design) + case 'firpm' + if exist('OCTAVE_VERSION', 'builtin') + use_remez = 1; + else + use_firpm = 1; + end + case 'kaiser' + use_kaiser = 1; + otherwise + error('Unknown FIR design request!'); +end + +if abs(cnv.fs1-cnv.fs2) < 1 + %% Return minimum needed for scripts to work + src.L=1; + src.M=1; + src.odm=1; + src.idm=1; + src.MOPS=0; + src.c_pb = 0; + src.c_sb = 0; + src.fir_delay_size = 0; + src.out_delay_size = 0; + src.blk_in = 1; + src.blk_out = 1; + src.gain = 1; + src.filter_length = 0; + return +end + +%% fractional SRC parameters +[L, M] = src_factor1_lm(cnv.fs1, cnv.fs2); +src.L = L; +src.M = M; +src.num_of_subfilters = L; +[src.idm src.odm] = src_find_l0m0(src.L, src.M); +min_fs = min(cnv.fs1,cnv.fs2); +src.f_pb = min_fs*cnv.c_pb; +src.f_sb = min_fs*cnv.c_sb; +src.c_pb = cnv.c_pb; +src.c_sb = cnv.c_sb; +src.fs1 = cnv.fs1; +src.fs2 = cnv.fs2; +src.rp = cnv.rp; +src.rs = cnv.rs; + +%% FIR PM design +fs3 = src.L*cnv.fs1; +f = [src.f_pb src.f_sb]; +a = [1 0]; + +% Kaiser fir is not equiripple, can allow more ripple in the passband +% lower freq. +dev = [(10^(cnv.rp/20)-1)/(10^(cnv.rp/20)+1) 10^(-cnv.rs/20)]; +[kn0, kw, kbeta, kftype] = kaiserord(f, a, dev, fs3); +if use_firpm + %dev = [(10^(cnv.rp/20)-1)/(10^(cnv.rp/20)+1) 10^(-cnv.rs/20)]; + [n0,fo,ao,w] = firpmord(f,a,dev,fs3); + n0 = round(n0*0.95); % Decrease order to 95% +end +if use_remez + n0 = round(kn0*0.60); % Decrease order to 70% + fo = [0 2*f/fs3 1]; + ao = [1 1 0 0]; + w = [1 dev(1)/dev(2)]; +end +if use_kaiser + n0 = round(kn0*0.70); % Decrease order to 70% +end + +% Constrain filter length to be a suitable multiple. Multiple of +% interpolation factor ensures that all subfilters are equal length. +% Make each sub-filter order multiple of N helps in making efficient +% implementation. +nfir_increment = src.num_of_subfilters * cnv.filter_length_mult; + +nsf0 = (n0+1)/nfir_increment; +if nsf0 > floor(nsf0) + n = (floor(nsf0)+1)*nfir_increment-1; +else + n = n0; +end + +src.subfilter_length = (n+1)/src.num_of_subfilters; +src.filter_length = n+1; +nfir = n; +f_sb = linspace(src.f_sb, fs3/2, 500); +stopband_ok = 0; +need_to_stop = 0; +delta = 100; +n_worse = 0; +n_worse_max = 20; +n = 1; +n_max = 100; +dn = ones(1, n_max)*1000; +fn = zeros(1, n_max); +while (stopband_ok) == 0 && (n < n_max) + if use_firpm || use_remez + if nfir > 1800 + b = fir1(nfir, kw, kftype, kaiser(nfir+1, kbeta)); + else + if use_firpm + b = firpm(nfir,fo,ao,w); + else + b = remez(nfir,fo,ao,w); + end + end + else + b = fir1(nfir, kw, kftype, kaiser(nfir+1, kbeta)); + end + m_b = max(abs(b)); + %sref = 2^(cnv.coef_bits-1); + %bq = round(b*sref/m_b)*m_b/sref; + bq = b; + h_sb = freqz(bq, 1, f_sb, fs3); + m_sb = 20*log10(abs(h_sb)); + delta_prev = delta; + delta = cnv.rs+max(m_sb); + fprintf('Step=%3d, Delta=%f dB, N=%d\n', n, delta, nfir); + dn(n) = delta; + fn(n) = nfir; + if delta < 0 + stopband_ok = 1; + else + if delta_prev < delta + n_worse = n_worse+1; + if n_worse > n_worse_max + need_to_stop = 1; % No improvement, reverse + idx = find(dn == min(dn), 1, 'first'); + nfir = fn(idx); + else + nfir = nfir + nfir_increment; + end + else + if need_to_stop == 0 + nfir = nfir + nfir_increment; + else + stopband_ok = 1; % Exit after reverse + fprintf('Warning: Filter stop band could not be '); + fprintf('reached.\n', cnv.coef_bits); + end + end + end + n = n + 1; +end + +f_p = linspace(0, fs3/2, 2000); +m_db = 20*log10(abs(freqz(bq, 1, f_p, fs3))); +i_pb = find(f_p < src.f_pb); +g_pb = max(m_db(i_pb)); +g_att_lin = 10^(-g_pb/20); + +if 1 + p_ymin = floor((-cnv.rs-50)/10)*10; + p_ymax = 10; + figure; + clf; + plot(f_p, m_db); + grid on; + xlabel('Frequency (Hz)'); + ylabel('Magnitude (dB)'); + axis([0 fs3/2 p_ymin p_ymax]); + hold on + plot([src.f_sb src.f_sb],[p_ymin p_ymax], 'r--'); + plot([0 fs3],[-cnv.rs -cnv.rs], 'r--'); + hold off + axes('Position', [ 0.58 0.7 0.3 0.2]); + box on; + plot(f_p(i_pb), m_db(i_pb)); + axis([0 src.f_pb -cnv.rp-0.01 cnv.rp+0.01]); + hold on + plot([0 src.f_pb], +0.5*cnv.rp*ones(1,2), 'r--'); + plot([0 src.f_pb], -0.5*cnv.rp*ones(1,2), 'r--'); + hold off + grid on; + box off; +end + +src.subfilter_length = ceil((nfir+1)/src.num_of_subfilters); +src.filter_length = src.subfilter_length*src.num_of_subfilters; +src.b = zeros(src.filter_length,1); +src.gain = 1; +src.b(1:nfir+1) = b*src.L*g_att_lin; +m = max(abs(src.b)); +gmax = (32767/32768)/m; +maxshift = floor(log(gmax)/log(2)); +src.b = src.b * 2^maxshift; +src.gain = 1/2^maxshift; +src.shift = maxshift; + +%% Reorder coefficients +if 1 + src.coefs = src.b; +else + src.coefs = zeros(src.filter_length,1); + for n = 1:src.num_of_subfilters + i11 = (n-1)*src.subfilter_length+1; + i12 = i11+src.subfilter_length-1; + src.coefs(i11:i12) = src.b(n:src.num_of_subfilters:end); + end +end + +src.halfband = 0; +src.blk_in = M; +src.blk_out = L; +src.MOPS = cnv.fs1/M*src.filter_length/1e6; +src.fir_delay_size = src.subfilter_length + ... + (src.num_of_subfilters-1)*src.idm + src.blk_in; +src.out_delay_size = (src.num_of_subfilters-1)*src.odm + 1; + +end diff --git a/tune/src/src_param.m b/tune/src/src_param.m new file mode 100644 index 0000000..49e935c --- /dev/null +++ b/tune/src/src_param.m @@ -0,0 +1,87 @@ +function cnv = src_param(fs1, fs2, coef_bits, q) + +% src_param - get converter parameters +% +% cnv = src_param(fs1, fs2, coef_bits, q) +% +% fs1 - input rate +% fs2 - output rate +% coef_bits - word length identifier +% q - quality scale filter bandwidth and stopband attenuation, +% 1 is default +% + +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +% Note: firpm design with rs 93 dB, or kaiser with 69 dB rs is fair quality. +% Both give about -80 dB THD+N with 24 bit coefficients. With 16 bit +% coefficients THD+N is limited to about -76 dB. + +if nargin < 4 + q = 1.0; +end + +%% Copy input parameters +cnv.fs1 = fs1; +cnv.fs2 = fs2; +cnv.coef_bits = coef_bits; + +%% FIR design +cnv.design = 'kaiser'; % Use firpm or kaiser + +%% Default SRC quality +cnv.c_pb = q * 22/48; % Gives 22 kHz BW @ 48 kHz +cnv.c_sb = 0.5; % Start stopband at Fs/2 +cnv.rs = 70; % Stopband attenuation in dB +cnv.rp = 0.1; % Passband ripple in dB +cnv.rp_tot = 0.1; % Max +/- passband ripple allowed, used in test script only + +%% Constrain sub-filter lengths. Make subfilters lengths multiple of four +% is a good assumption for processors. +cnv.filter_length_mult = 4; + +%% Exceptions for quality +if min(fs1, fs2) > 80e3 + cnv.c_pb = 30e3/min(fs1, fs2); % 30 kHz BW for > 80 kHz +end + +%% Sanity checks +if cnv.c_pb > 0.49 + error('Too wide passband'); +end +if cnv.c_pb < 0.15 + error('Too narrow passband'); +end +if cnv.rs > 160 + error('Too large stopband attenuation'); +end +if cnv.rs < 40 + error('Too low stopband attenuation'); +end diff --git a/tune/src/src_std_int32.m b/tune/src/src_std_int32.m new file mode 100644 index 0000000..125ae96 --- /dev/null +++ b/tune/src/src_std_int32.m @@ -0,0 +1,30 @@ +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +src_generate(); diff --git a/tune/src/src_tiny_int16.m b/tune/src/src_tiny_int16.m new file mode 100644 index 0000000..be310fb --- /dev/null +++ b/tune/src/src_tiny_int16.m @@ -0,0 +1,41 @@ +% Copyright (c) 2016, Intel Corporation +% All rights reserved. +% +% Redistribution and use in source and binary forms, with or without +% modification, are permitted provided that the following conditions are met: +% * Redistributions of source code must retain the above copyright +% notice, this list of conditions and the following disclaimer. +% * Redistributions in binary form must reproduce the above copyright +% notice, this list of conditions and the following disclaimer in the +% documentation and/or other materials provided with the distribution. +% * Neither the name of the Intel Corporation nor the +% names of its contributors may be used to endorse or promote products +% derived from this software without specific prior written permission. +% +% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +% AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +% IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +% ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +% LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +% CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +% SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +% INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +% CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +% POSSIBILITY OF SUCH DAMAGE. +% +% Author: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> +% + +fs1 = [8e3 16e3 24e3 32e3 44.1e3 48e3]; +fs2 = [8e3 16e3 24e3 32e3 44.1e3 48e3]; +fsm = [0 0 0 0 0 1; ... + 0 0 0 0 0 1; ... + 0 0 0 0 0 1; ... + 0 0 0 0 0 1; ... + 0 0 0 0 0 1; ... + 1 1 1 1 1 0; ... + ]; +fmt = 'int16'; profile = 'tiny'; q = 0.75; + +src_generate(fs1, fs2, fmt, fsm, profile, q); -- 2.14.1

2 3

[Sound-open-firmware] [PTACH RFC 0/5] Add switch widget for loopback
by Xiuli Pan 04 Jun '18

04 Jun '18

From: Pan Xiuli <xiuli.pan(a)linux.intel.com> Have some clean up for the code may used. Add some macros that are needed for the switch widget. TODO: Have the useable get/put function for the kcontrol. Pan Xiuli (5): topology: mixer: Add CONTROLMIXER_MIN topology: utils: Add kdapm macro for route with kcontrol topology: m4: add switch widget topology: sof: add pipeline loopback dai topology: test: add loopback test topology topology/m4/mixercontrol.m4 | 16 ++++-- topology/m4/switch.m4 | 46 +++++++++++++++ topology/m4/utils.m4 | 4 ++ topology/sof/pipe-dai-loopback.m4 | 36 ++++++++++++ topology/sof/pipe-low-latency-capture.m4 | 3 +- topology/sof/pipe-low-latency-playback.m4 | 2 + topology/sof/pipe-pcm-media.m4 | 1 + topology/sof/pipe-tone.m4 | 2 + topology/sof/pipe-volume-capture.m4 | 1 + topology/sof/pipe-volume-playback.m4 | 1 + topology/test/test-loopback-ssp.m4 | 94 +++++++++++++++++++++++++++++++ topology/test/tplg-build.sh | 2 +- 12 files changed, 201 insertions(+), 7 deletions(-) create mode 100644 topology/m4/switch.m4 create mode 100644 topology/sof/pipe-dai-loopback.m4 create mode 100644 topology/test/test-loopback-ssp.m4 -- 2.7.4

7 33

[Sound-open-firmware] [PATCH 1/3] topology: Add SOF_TKN_DAI_LBM for ssp loopback mode
by Xiuli Pan 04 Jun '18

04 Jun '18

From: Pan Xiuli <xiuli.pan(a)linux.intel.com> Add token SOF_TKN_DAI_LBM for SSP loopback mode. Signed-off-by: Pan Xiuli <xiuli.pan(a)linux.intel.com> --- Work with patch set: SOF-Kernel: ASoC: SOF: upai: ipc: Add lbm in sof_ipc_dai_config ASoC: SOF: uapi: topology: Add SOF_TKN_DAI_LBM for ssp loopback mode ASoC: SOF: topology: Add topology handler for dai config loopback mode SOF: uapi: ipc: Add lbm in sof_ipc_dai_config IPC: Add IPC handler for dai config loopback mode SOF-Tools: topology: Add SOF_TKN_DAI_LBM for ssp loopback mode topology: m4: Add option for loopback mode in DAI config topology: test: Add loopback topology test & santity test with: Mininow max rt5651 and UP2 Hifiberry PRO and CNL nocodec SOF master: 65ddcddfcc9a20f5b622cf3ba93dc326387a9d5d SOF-Tool master: 07d290c8ac6026af28bada021ac2215e3453fa88 https://github.com/plbossart/sound/tree/topic/sof-v4.14: 3ffd39334cb53aced88b8aba17cae3df9ee2736f --- topology/sof/tokens.m4 | 1 + 1 file changed, 1 insertion(+) diff --git a/topology/sof/tokens.m4 b/topology/sof/tokens.m4 index d1230d8..51f0cf7 100644 --- a/topology/sof/tokens.m4 +++ b/topology/sof/tokens.m4 @@ -21,6 +21,7 @@ SectionVendorTokens."sof_dai_tokens" { SOF_TKN_DAI_TYPE "154" SOF_TKN_DAI_INDEX "155" SOF_TKN_DAI_SAMPLE_BITS "156" + SOF_TKN_DAI_LBM "157" } SectionVendorTokens."sof_sched_tokens" { -- 2.7.4

3 5

[Sound-open-firmware] FW: [sof-driver-review:topic/sof-upstream 97/98] include/uapi/sound/sof-ipc.h:707:11: error: expected identifier or '(' before numeric constant
by Lin, Mengdong 04 Jun '18

04 Jun '18

-----Original Message----- From: lkp Sent: Monday, June 4, 2018 12:37 PM To: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> Cc: kbuild-all(a)01.org; Wang, Jia W <jia.w.wang(a)intel.com>; Zhang, Keqiao <keqiao.zhang(a)intel.com>; Lin, Mengdong <mengdong.lin(a)intel.com>; Li, Jocelyn <jocelyn.li(a)intel.com> Subject: [sof-driver-review:topic/sof-upstream 97/98] include/uapi/sound/sof-ipc.h:707:11: error: expected identifier or '(' before numeric constant tree: git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc.git topic/sof-upstream head: 297c56845645fc3b2a94862be301d6e33e81d9e8 commit: d20c0648bb2590f6450f4872aea0ac3ca21f80e5 [97/98] ASoC: SOF: Dont depend on SG buffers for generic SOF core config: mips-txx9 (attached as .config) compiler: mips-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0 reproduce: wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross git checkout d20c0648bb2590f6450f4872aea0ac3ca21f80e5 # save the attached .config to linux build tree make.cross ARCH=mips All errors (new ones prefixed by >>): >> include/uapi/sound/sof-ipc.h:707:11: error: expected identifier or '(' before numeric constant uint32_t mips; /* worst case instruction count per period */ ^ sound/soc/sof/core.c: In function 'snd_sof_create_page_table': sound/soc/sof/core.c:447:10: error: implicit declaration of function 'snd_sgbuf_aligned_pages'; did you mean 'snd_sgbuf_get_ptr'? [-Werror=implicit-function-declaration] pages = snd_sgbuf_aligned_pages(size); ^~~~~~~~~~~~~~~~~~~~~~~ snd_sgbuf_get_ptr cc1: some warnings being treated as errors -- >> include/uapi/sound/sof-ipc.h:707:11: error: expected identifier or '(' before numeric constant uint32_t mips; /* worst case instruction count per period */ ^ -- >> include/uapi/sound/sof-ipc.h:707:11: error: expected identifier or '(' before numeric constant uint32_t mips; /* worst case instruction count per period */ ^ In file included from include/linux/compiler_types.h:58:0, from <command-line>:0: >> sound/soc/sof/topology.c:355:37: error: expected identifier before numeric constant offsetof(struct sof_ipc_pipe_new, mips), 0}, ^ include/linux/compiler-gcc.h:170:24: note: in definition of macro '__compiler_offsetof' __builtin_offsetof(a, b) ^ sound/soc/sof/topology.c:355:3: note: in expansion of macro 'offsetof' offsetof(struct sof_ipc_pipe_new, mips), 0}, ^~~~~~~~ sound/soc/sof/topology.c: In function 'sof_widget_load_pipeline': sound/soc/sof/topology.c:1040:12: error: expected identifier before numeric constant pipeline.mips, pipeline.core, pipeline.frames_per_sched); ^ sound/soc/sof/topology.c:1038:2: note: in expansion of macro 'dev_dbg' dev_dbg(sdev->dev, "pipeline %s: deadline %d pri %d mips %d core %d frames %d\n", ^~~~~~~ -- >> include/uapi/sound/sof-ipc.h:707:11: error: expected identifier or '(' before numeric constant uint32_t mips; /* worst case instruction count per period */ ^ sound/soc//sof/core.c: In function 'snd_sof_create_page_table': sound/soc//sof/core.c:447:10: error: implicit declaration of function 'snd_sgbuf_aligned_pages'; did you mean 'snd_sgbuf_get_ptr'? [-Werror=implicit-function-declaration] pages = snd_sgbuf_aligned_pages(size); ^~~~~~~~~~~~~~~~~~~~~~~ snd_sgbuf_get_ptr cc1: some warnings being treated as errors -- >> include/uapi/sound/sof-ipc.h:707:11: error: expected identifier or '(' before numeric constant uint32_t mips; /* worst case instruction count per period */ ^ In file included from include/linux/compiler_types.h:58:0, from <command-line>:0: sound/soc//sof/topology.c:355:37: error: expected identifier before numeric constant offsetof(struct sof_ipc_pipe_new, mips), 0}, ^ include/linux/compiler-gcc.h:170:24: note: in definition of macro '__compiler_offsetof' __builtin_offsetof(a, b) ^ sound/soc//sof/topology.c:355:3: note: in expansion of macro 'offsetof' offsetof(struct sof_ipc_pipe_new, mips), 0}, ^~~~~~~~ sound/soc//sof/topology.c: In function 'sof_widget_load_pipeline': sound/soc//sof/topology.c:1040:12: error: expected identifier before numeric constant pipeline.mips, pipeline.core, pipeline.frames_per_sched); ^ sound/soc//sof/topology.c:1038:2: note: in expansion of macro 'dev_dbg' dev_dbg(sdev->dev, "pipeline %s: deadline %d pri %d mips %d core %d frames %d\n", ^~~~~~~ vim +707 include/uapi/sound/sof-ipc.h 11b056e2 Liam Girdwood 2018-01-08 693 11b056e2 Liam Girdwood 2018-01-08 694 /* 11b056e2 Liam Girdwood 2018-01-08 695 * Pipeline 11b056e2 Liam Girdwood 2018-01-08 696 */ 11b056e2 Liam Girdwood 2018-01-08 697 11b056e2 Liam Girdwood 2018-01-08 698 /* new pipeline - SOF_IPC_TPLG_PIPE_NEW */ 11b056e2 Liam Girdwood 2018-01-08 699 struct sof_ipc_pipe_new { 11b056e2 Liam Girdwood 2018-01-08 700 struct sof_ipc_hdr hdr; 11b056e2 Liam Girdwood 2018-01-08 701 uint32_t comp_id; /* component id for pipeline */ 11b056e2 Liam Girdwood 2018-01-08 702 uint32_t pipeline_id; /* pipeline id */ 11b056e2 Liam Girdwood 2018-01-08 703 uint32_t sched_id; /* sheduling component id */ 11b056e2 Liam Girdwood 2018-01-08 704 uint32_t core; /* core we run on */ 11b056e2 Liam Girdwood 2018-01-08 705 uint32_t deadline; /* execution completion deadline in us*/ 11b056e2 Liam Girdwood 2018-01-08 706 uint32_t priority; /* priority level 0 (low) to 10 (max) */ 11b056e2 Liam Girdwood 2018-01-08 @707 uint32_t mips; /* worst case instruction count per period */ 11b056e2 Liam Girdwood 2018-01-08 708 uint32_t frames_per_sched;/* output frames of pipeline, 0 is variable */ 11b056e2 Liam Girdwood 2018-01-08 709 uint32_t xrun_limit_usecs; /* report xruns greater than limit */ 11b056e2 Liam Girdwood 2018-01-08 710 uint32_t timer;/* non zero if timer scheduled otherwise DAI scheduled */ 11b056e2 Liam Girdwood 2018-01-08 711 } __attribute__((packed)); 11b056e2 Liam Girdwood 2018-01-08 712 :::::: The code at line 707 was first introduced by commit :::::: 11b056e2dcccc264ac967b7b92eea3191925b702 ASoC: SOF: Add support for IPC IO between DSP and Host :::::: TO: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> :::::: CC: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation

2 1

[Sound-open-firmware] [PATCH] BDW: refine ssp start function
by Rander Wang 04 Jun '18

04 Jun '18

Set Tx|Rx Enable for starting playback|capture Signed-off-by: Rander Wang <rander.wang(a)linux.intel.com> --- test it on Broadwell, no need to test other platforms SOF: master 131a1887631621 kernel: v4.14 d09db67c5a9d6d SOF-tools: master 13b56fa6047c566a --- src/drivers/hsw-ssp.c | 2 ++ src/include/sof/ssp.h | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/src/drivers/hsw-ssp.c b/src/drivers/hsw-ssp.c index 43024a4..a68898e 100644 --- a/src/drivers/hsw-ssp.c +++ b/src/drivers/hsw-ssp.c @@ -439,11 +439,13 @@ static void ssp_start(struct dai *dai, int direction) SSCR1_TSRE | SSCR1_EBCEI); ssp_update_bits(dai, SSCR0, SSCR0_SSE, SSCR0_SSE); ssp_update_bits(dai, SSCR0, SSCR0_TIM, 0); + ssp_update_bits(dai, SSTSA, SSTSA_TSEN, SSTSA_TSEN); } else { ssp_update_bits(dai, SSCR1, SSCR1_RSRE | SSCR1_EBCEI, SSCR1_RSRE | SSCR1_EBCEI); ssp_update_bits(dai, SSCR0, SSCR0_SSE, SSCR0_SSE); ssp_update_bits(dai, SSCR0, SSCR0_RIM, 0); + ssp_update_bits(dai, SSRSA, SSRSA_RSEN, SSRSA_RSEN); } /* enable port */ diff --git a/src/include/sof/ssp.h b/src/include/sof/ssp.h index 3a1f6ed..fdcfcac 100644 --- a/src/include/sof/ssp.h +++ b/src/include/sof/ssp.h @@ -198,7 +198,8 @@ extern const struct dai_ops ssp_ops; #define SFIFOTT_TX(x) ((x) - 1) #define SFIFOTT_RX(x) (((x) - 1) << 16) -#if defined CONFIG_APOLLOLAKE || defined CONFIG_CANNONLAKE +#if defined CONFIG_APOLLOLAKE || defined CONFIG_CANNONLAKE ||\ + defined CONFIG_HASWELL || defined CONFIG_BROADWELL #define SSTSA_TSEN BIT(8) #define SSRSA_RSEN BIT(8) -- 2.14.1

2 1