Convert to // comments in the leading comment, drop the boilerplate license text and use the correct MODULE_LICENSE.
Signed-off-by: Peter Rosin peda@axentia.se --- sound/soc/atmel/tse850-pcm5142.c | 78 +++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 42 deletions(-)
diff --git a/sound/soc/atmel/tse850-pcm5142.c b/sound/soc/atmel/tse850-pcm5142.c index 3a1393283156..214adcad5419 100644 --- a/sound/soc/atmel/tse850-pcm5142.c +++ b/sound/soc/atmel/tse850-pcm5142.c @@ -1,44 +1,38 @@ -/* - * TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec - * - * Copyright (C) 2016 Axentia Technologies AB - * - * Author: Peter Rosin peda@axentia.se - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * loop1 relays - * IN1 +---o +------------+ o---+ OUT1 - * \ / - * + + - * | / | - * +--o +--. | - * | add | | - * | V | - * | .---. | - * DAC +----------->|Sum|---+ - * | '---' | - * | | - * + + - * - * IN2 +---o--+------------+--o---+ OUT2 - * loop2 relays - * - * The 'loop1' gpio pin controlls two relays, which are either in loop - * position, meaning that input and output are directly connected, or - * they are in mixer position, meaning that the signal is passed through - * the 'Sum' mixer. Similarly for 'loop2'. - * - * In the above, the 'loop1' relays are inactive, thus feeding IN1 to the - * mixer (if 'add' is active) and feeding the mixer output to OUT1. The - * 'loop2' relays are active, short-cutting the TSE-850 from channel 2. - * IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name - * of the (filtered) output from the PCM5142 codec. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec +// +// Copyright (C) 2016 Axentia Technologies AB +// +// Author: Peter Rosin peda@axentia.se +// +// loop1 relays +// IN1 +---o +------------+ o---+ OUT1 +// \ / +// + + +// | / | +// +--o +--. | +// | add | | +// | V | +// | .---. | +// DAC +----------->|Sum|---+ +// | '---' | +// | | +// + + +// +// IN2 +---o--+------------+--o---+ OUT2 +// loop2 relays +// +// The 'loop1' gpio pin controlls two relays, which are either in loop +// position, meaning that input and output are directly connected, or +// they are in mixer position, meaning that the signal is passed through +// the 'Sum' mixer. Similarly for 'loop2'. +// +// In the above, the 'loop1' relays are inactive, thus feeding IN1 to the +// mixer (if 'add' is active) and feeding the mixer output to OUT1. The +// 'loop2' relays are active, short-cutting the TSE-850 from channel 2. +// IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name +// of the (filtered) output from the PCM5142 codec.
#include <linux/clk.h> #include <linux/gpio.h> @@ -452,4 +446,4 @@ module_platform_driver(tse850_driver); /* Module information */ MODULE_AUTHOR("Peter Rosin peda@axentia.se"); MODULE_DESCRIPTION("ALSA SoC driver for TSE-850 with PCM5142 codec"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2");