[alsa-devel] [PATCH] ASoC: atmel: tse850: switch to SPDX license identifier
Convert to // comments in the leading comment, drop the boilerplate license text and use the correct MODULE_LICENSE.
Signed-off-by: Peter Rosin peda@axentia.se --- sound/soc/atmel/tse850-pcm5142.c | 78 +++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 42 deletions(-)
diff --git a/sound/soc/atmel/tse850-pcm5142.c b/sound/soc/atmel/tse850-pcm5142.c index 3a1393283156..214adcad5419 100644 --- a/sound/soc/atmel/tse850-pcm5142.c +++ b/sound/soc/atmel/tse850-pcm5142.c @@ -1,44 +1,38 @@ -/* - * TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec - * - * Copyright (C) 2016 Axentia Technologies AB - * - * Author: Peter Rosin peda@axentia.se - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * loop1 relays - * IN1 +---o +------------+ o---+ OUT1 - * \ / - * + + - * | / | - * +--o +--. | - * | add | | - * | V | - * | .---. | - * DAC +----------->|Sum|---+ - * | '---' | - * | | - * + + - * - * IN2 +---o--+------------+--o---+ OUT2 - * loop2 relays - * - * The 'loop1' gpio pin controlls two relays, which are either in loop - * position, meaning that input and output are directly connected, or - * they are in mixer position, meaning that the signal is passed through - * the 'Sum' mixer. Similarly for 'loop2'. - * - * In the above, the 'loop1' relays are inactive, thus feeding IN1 to the - * mixer (if 'add' is active) and feeding the mixer output to OUT1. The - * 'loop2' relays are active, short-cutting the TSE-850 from channel 2. - * IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name - * of the (filtered) output from the PCM5142 codec. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec +// +// Copyright (C) 2016 Axentia Technologies AB +// +// Author: Peter Rosin peda@axentia.se +// +// loop1 relays +// IN1 +---o +------------+ o---+ OUT1 +// \ / +// + + +// | / | +// +--o +--. | +// | add | | +// | V | +// | .---. | +// DAC +----------->|Sum|---+ +// | '---' | +// | | +// + + +// +// IN2 +---o--+------------+--o---+ OUT2 +// loop2 relays +// +// The 'loop1' gpio pin controlls two relays, which are either in loop +// position, meaning that input and output are directly connected, or +// they are in mixer position, meaning that the signal is passed through +// the 'Sum' mixer. Similarly for 'loop2'. +// +// In the above, the 'loop1' relays are inactive, thus feeding IN1 to the +// mixer (if 'add' is active) and feeding the mixer output to OUT1. The +// 'loop2' relays are active, short-cutting the TSE-850 from channel 2. +// IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name +// of the (filtered) output from the PCM5142 codec.
#include <linux/clk.h> #include <linux/gpio.h> @@ -452,4 +446,4 @@ module_platform_driver(tse850_driver); /* Module information */ MODULE_AUTHOR("Peter Rosin peda@axentia.se"); MODULE_DESCRIPTION("ALSA SoC driver for TSE-850 with PCM5142 codec"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2");
The patch
ASoC: atmel: tse850: switch to SPDX license identifier
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 1b3b7981524af2b6dcdf78cfa6dca89522c13ade Mon Sep 17 00:00:00 2001
From: Peter Rosin peda@axentia.se Date: Mon, 20 Aug 2018 12:14:09 +0200 Subject: [PATCH] ASoC: atmel: tse850: switch to SPDX license identifier
Convert to // comments in the leading comment, drop the boilerplate license text and use the correct MODULE_LICENSE.
Signed-off-by: Peter Rosin peda@axentia.se Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/atmel/tse850-pcm5142.c | 78 +++++++++++++++----------------- 1 file changed, 36 insertions(+), 42 deletions(-)
diff --git a/sound/soc/atmel/tse850-pcm5142.c b/sound/soc/atmel/tse850-pcm5142.c index 3a1393283156..214adcad5419 100644 --- a/sound/soc/atmel/tse850-pcm5142.c +++ b/sound/soc/atmel/tse850-pcm5142.c @@ -1,44 +1,38 @@ -/* - * TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec - * - * Copyright (C) 2016 Axentia Technologies AB - * - * Author: Peter Rosin peda@axentia.se - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * loop1 relays - * IN1 +---o +------------+ o---+ OUT1 - * \ / - * + + - * | / | - * +--o +--. | - * | add | | - * | V | - * | .---. | - * DAC +----------->|Sum|---+ - * | '---' | - * | | - * + + - * - * IN2 +---o--+------------+--o---+ OUT2 - * loop2 relays - * - * The 'loop1' gpio pin controlls two relays, which are either in loop - * position, meaning that input and output are directly connected, or - * they are in mixer position, meaning that the signal is passed through - * the 'Sum' mixer. Similarly for 'loop2'. - * - * In the above, the 'loop1' relays are inactive, thus feeding IN1 to the - * mixer (if 'add' is active) and feeding the mixer output to OUT1. The - * 'loop2' relays are active, short-cutting the TSE-850 from channel 2. - * IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name - * of the (filtered) output from the PCM5142 codec. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec +// +// Copyright (C) 2016 Axentia Technologies AB +// +// Author: Peter Rosin peda@axentia.se +// +// loop1 relays +// IN1 +---o +------------+ o---+ OUT1 +// \ / +// + + +// | / | +// +--o +--. | +// | add | | +// | V | +// | .---. | +// DAC +----------->|Sum|---+ +// | '---' | +// | | +// + + +// +// IN2 +---o--+------------+--o---+ OUT2 +// loop2 relays +// +// The 'loop1' gpio pin controlls two relays, which are either in loop +// position, meaning that input and output are directly connected, or +// they are in mixer position, meaning that the signal is passed through +// the 'Sum' mixer. Similarly for 'loop2'. +// +// In the above, the 'loop1' relays are inactive, thus feeding IN1 to the +// mixer (if 'add' is active) and feeding the mixer output to OUT1. The +// 'loop2' relays are active, short-cutting the TSE-850 from channel 2. +// IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name +// of the (filtered) output from the PCM5142 codec.
#include <linux/clk.h> #include <linux/gpio.h> @@ -452,4 +446,4 @@ module_platform_driver(tse850_driver); /* Module information */ MODULE_AUTHOR("Peter Rosin peda@axentia.se"); MODULE_DESCRIPTION("ALSA SoC driver for TSE-850 with PCM5142 codec"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2");
participants (2)
-
Mark Brown -
Peter Rosin