On 29/07/2022 04:10, Shengjiu Wang wrote:
Convert the NXP SAI binding to DT schema format using json-schema.
The Synchronous Audio Interface (SAI) provides an interface that supports full-duplex serial interfaces with frame synchronization formats such as I2S, AC97, TDM, and codec/DSP interfaces.
Beside conversion, 'fsl,shared-interrupt' and '#sound-dai-cells' are added for they are already used by some dts.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
changes in v3
- address comments from Krzysztof
changes in v2
- fix exclusive property issue
- fix order issue of compatible, clock-names, dma-names
.../devicetree/bindings/sound/fsl,sai.yaml | 221 ++++++++++++++++++ .../devicetree/bindings/sound/fsl-sai.txt | 95 -------- 2 files changed, 221 insertions(+), 95 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/fsl,sai.yaml delete mode 100644 Documentation/devicetree/bindings/sound/fsl-sai.txt
diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml new file mode 100644 index 000000000000..86ee46755b0c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml @@ -0,0 +1,221 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Freescale Synchronous Audio Interface (SAI).
+maintainers:
- Shengjiu Wang shengjiu.wang@nxp.com
+description: |
- The SAI is based on I2S module that used communicating with audio codecs,
- which provides a synchronous audio interface that supports fullduplex
- serial interfaces with frame synchronization such as I2S, AC97, TDM, and
- codec/DSP interfaces.
+properties:
- compatible:
- oneOf:
- enum:- fsl,vf610-sai- fsl,imx6sx-sai- fsl,imx6ul-sai- fsl,imx7ulp-sai- fsl,imx8mq-sai- fsl,imx8qm-sai- fsl,imx8ulp-sai- items:- enum:- fsl,imx8mm-sai- fsl,imx8mn-sai- fsl,imx8mp-sai- const: fsl,imx8mq-sai- reg:
- maxItems: 1
- interrupts:
- items:
- description: receive and transmit interrupt- dmas:
- maxItems: 2
- dma-names:
- maxItems: 2
- clocks:
- items:
- description: The ipg clock for register access- description: master clock source 0 (obsoleted)- description: master clock source 1- description: master clock source 2- description: master clock source 3- description: PLL clock source for 8kHz series- description: PLL clock source for 11kHz series- minItems: 4
- clock-names:
- oneOf:
- items:- const: bus- const: mclk0- const: mclk1- const: mclk2- const: mclk3- const: pll8k- const: pll11kminItems: 4- items:- const: bus- const: mclk1- const: mclk2- const: mclk3- const: pll8k- const: pll11kminItems: 4- lsb-first:
- $ref: /schemas/types.yaml#/definitions/flag
- description: |
Configures whether the LSB or the MSB is transmittedfirst for the fifo data. If this property is absent,the MSB is transmitted first as default, or the LSBis transmitted first.- type: boolean
The type: boolean goes instead of $ref, not additionally to it. Just like below...
- big-endian:
- description: |
required if all the SAI registers are big-endian rather than little-endian.- type: boolean
... be consistent.
- fsl,sai-synchronous-rx:
- $ref: /schemas/types.yaml#/definitions/flag
- description: |
SAI will work in the synchronous mode (sync Tx with Rx) which meansboth the transmitter and the receiver will send and receive data byfollowing receiver's bit clocks and frame sync clocks.- type: boolean
Best regards, Krzysztof