Convert the NXP SAI binding to DT schema format using json-schema.

The Synchronous Audio Interface (SAI) provides an interface that supports full-duplex serial interfaces with frame synchronization formats such as I2S, AC97, TDM, and codec/DSP interfaces.

Beside conversion, 'fsl,shared-interrupt' and '#sound-dai-cells' are added for they are already used by some dts.

Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- changes in v3 - address comments from Krzysztof

changes in v2 - fix exclusive property issue - fix order issue of compatible, clock-names, dma-names

.../devicetree/bindings/sound/fsl,sai.yaml | 221 ++++++++++++++++++ .../devicetree/bindings/sound/fsl-sai.txt | 95 -------- 2 files changed, 221 insertions(+), 95 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/fsl,sai.yaml delete mode 100644 Documentation/devicetree/bindings/sound/fsl-sai.txt

diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml new file mode 100644 index 000000000000..86ee46755b0c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml @@ -0,0 +1,221 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Synchronous Audio Interface (SAI). + +maintainers: + - Shengjiu Wang shengjiu.wang@nxp.com + +description: | + The SAI is based on I2S module that used communicating with audio codecs, + which provides a synchronous audio interface that supports fullduplex + serial interfaces with frame synchronization such as I2S, AC97, TDM, and + codec/DSP interfaces. + +properties: + compatible: + oneOf: + - enum: + - fsl,vf610-sai + - fsl,imx6sx-sai + - fsl,imx6ul-sai + - fsl,imx7ulp-sai + - fsl,imx8mq-sai + - fsl,imx8qm-sai + - fsl,imx8ulp-sai + - items: + - enum: + - fsl,imx8mm-sai + - fsl,imx8mn-sai + - fsl,imx8mp-sai + - const: fsl,imx8mq-sai + + reg: + maxItems: 1 + + interrupts: + items: + - description: receive and transmit interrupt + + dmas: + maxItems: 2 + + dma-names: + maxItems: 2 + + clocks: + items: + - description: The ipg clock for register access + - description: master clock source 0 (obsoleted) + - description: master clock source 1 + - description: master clock source 2 + - description: master clock source 3 + - description: PLL clock source for 8kHz series + - description: PLL clock source for 11kHz series + minItems: 4 + + clock-names: + oneOf: + - items: + - const: bus + - const: mclk0 + - const: mclk1 + - const: mclk2 + - const: mclk3 + - const: pll8k + - const: pll11k + minItems: 4 + - items: + - const: bus + - const: mclk1 + - const: mclk2 + - const: mclk3 + - const: pll8k + - const: pll11k + minItems: 4 + + lsb-first: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Configures whether the LSB or the MSB is transmitted + first for the fifo data. If this property is absent, + the MSB is transmitted first as default, or the LSB + is transmitted first. + type: boolean + + big-endian: + description: | + required if all the SAI registers are big-endian rather than little-endian. + type: boolean + + fsl,sai-synchronous-rx: + $ref: /schemas/types.yaml#/definitions/flag + description: | + SAI will work in the synchronous mode (sync Tx with Rx) which means + both the transmitter and the receiver will send and receive data by + following receiver's bit clocks and frame sync clocks. + type: boolean + + fsl,sai-asynchronous: + $ref: /schemas/types.yaml#/definitions/flag + description: | + SAI will work in the asynchronous mode, which means both transmitter + and receiver will send and receive data by following their own bit clocks + and frame sync clocks separately. + If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the + default synchronous mode (sync Rx with Tx) will be used, which means both + transmitter and receiver will send and receive data by following clocks + of transmitter. + type: boolean + + fsl,dataline: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Configure the dataline. It has 3 value for each configuration + maxItems: 16 + items: + items: + - description: format Default(0), I2S(1) or PDM(2) + enum: [0, 1, 2] + - description: dataline mask for 'rx' + - description: dataline mask for 'tx' + + fsl,sai-mclk-direction-output: + $ref: /schemas/types.yaml#/definitions/flag + description: SAI will output the SAI MCLK clock. + type: boolean + + fsl,shared-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Interrupt is shared with other modules. + type: boolean + + "#sound-dai-cells": + const: 0 + description: optional, some dts node didn't add it. + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,vf610-sai + then: + properties: + dmas: + items: + - description: DMA controller phandle and request line for TX + - description: DMA controller phandle and request line for RX + dma-names: + items: + - const: tx + - const: rx + else: + properties: + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + dma-names: + items: + - const: rx + - const: tx + - if: + required: + - fsl,sai-asynchronous + then: + properties: + fsl,sai-synchronous-rx: false + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/vf610-clock.h> + sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_1>; + clocks = <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_SAI2>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 21>, + <&edma0 0 20>; + big-endian; + lsb-first; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx8mm-clock.h> + sai1: sai@30010000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + fsl,dataline = <1 0xff 0xff 2 0xff 0x11>; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt deleted file mode 100644 index fbdefc3fade7..000000000000 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ /dev/null @@ -1,95 +0,0 @@ -Freescale Synchronous Audio Interface (SAI). - -The SAI is based on I2S module that used communicating with audio codecs, -which provides a synchronous audio interface that supports fullduplex -serial interfaces with frame synchronization such as I2S, AC97, TDM, and -codec/DSP interfaces. - -Required properties: - - - compatible : Compatible list, contains "fsl,vf610-sai", - "fsl,imx6sx-sai", "fsl,imx6ul-sai", - "fsl,imx7ulp-sai", "fsl,imx8mq-sai", - "fsl,imx8qm-sai", "fsl,imx8mm-sai", - "fsl,imx8mn-sai", "fsl,imx8mp-sai", or - "fsl,imx8ulp-sai". - - - reg : Offset and length of the register set for the device. - - - clocks : Must contain an entry for each entry in clock-names. - - - clock-names : Must include the "bus" for register access and - "mclk1", "mclk2", "mclk3" for bit clock and frame - clock providing. - "pll8k", "pll11k" are optional, they are the clock - source for root clock, one is for 8kHz series rates - another one is for 11kHz series rates. - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Two dmas have to be defined, "tx" and "rx". - - - pinctrl-names : Must contain a "default" entry. - - - pinctrl-NNN : One property must exist for each entry in - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt - for details of the property values. - - - lsb-first : Configures whether the LSB or the MSB is transmitted - first for the fifo data. If this property is absent, - the MSB is transmitted first as default, or the LSB - is transmitted first. - - - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating - that SAI will work in the synchronous mode (sync Tx - with Rx) which means both the transmitter and the - receiver will send and receive data by following - receiver's bit clocks and frame sync clocks. - - - fsl,sai-asynchronous: This is a boolean property. If present, indicating - that SAI will work in the asynchronous mode, which - means both transmitter and receiver will send and - receive data by following their own bit clocks and - frame sync clocks separately. - - - fsl,dataline : configure the dataline. it has 3 value for each configuration - first one means the type: I2S(1) or PDM(2) - second one is dataline mask for 'rx' - third one is dataline mask for 'tx'. - for example: fsl,dataline = <1 0xff 0xff 2 0xff 0x11>; - it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type - rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled). - -Optional properties: - - - big-endian : Boolean property, required if all the SAI - registers are big-endian rather than little-endian. - -Optional properties (for mx6ul): - - - fsl,sai-mclk-direction-output: This is a boolean property. If present, - indicates that SAI will output the SAI MCLK clock. - -Note: -- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the - default synchronous mode (sync Rx with Tx) will be used, which means both - transmitter and receiver will send and receive data by following clocks - of transmitter. -- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive. - -Example: -sai2: sai@40031000 { - compatible = "fsl,vf610-sai"; - reg = <0x40031000 0x1000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai2_1>; - clocks = <&clks VF610_CLK_PLATFORM_BUS>, - <&clks VF610_CLK_SAI2>, - <&clks 0>, <&clks 0>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, - <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; - big-endian; - lsb-first; -};