Hello Rob,
On 7/6/23 16:51, Rob Herring wrote:
On Wed, Jul 05, 2023 at 07:27:53PM +0200, Gatien Chevallier wrote:
feature-domains is an optional property that allows a peripheral to refer to one or more feature domain controller(s).
Description of this property is added to all peripheral binding files of the peripheral under the STM32 firewall controllers. It allows an accurate representation of the hardware, where various peripherals are connected to this firewall bus. The firewall can then check the peripheral accesses before allowing it to probe.
Signed-off-by: Gatien Chevallier gatien.chevallier@foss.st.com
Disclaimer: Some error with dtbs_check will be observed as I've considered the property to be generic, as Rob asked
Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml | 4 ++++ Documentation/devicetree/bindings/dma/st,stm32-dma.yaml | 4 ++++ Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml | 4 ++++ Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 4 ++++ Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml | 4 ++++ .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 ++++ Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml | 4 ++++ .../devicetree/bindings/media/cec/st,stm32-cec.yaml | 4 ++++ Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml | 4 ++++ .../bindings/memory-controllers/st,stm32-fmc2-ebi.yaml | 4 ++++ Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml | 4 ++++ Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml | 5 +++++ Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 4 ++++ Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 4 ++++ Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 4 ++++ .../devicetree/bindings/regulator/st,stm32-vrefbuf.yaml | 4 ++++ Documentation/devicetree/bindings/rng/st,stm32-rng.yaml | 4 ++++ Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 4 ++++ Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml | 4 ++++ Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 4 ++++ .../devicetree/bindings/sound/st,stm32-spdifrx.yaml | 4 ++++ Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml | 4 ++++ Documentation/devicetree/bindings/spi/st,stm32-spi.yaml | 4 ++++ Documentation/devicetree/bindings/usb/dwc2.yaml | 4 ++++ 24 files changed, 97 insertions(+)
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index b767ec72a999..daf8dcaef627 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -50,6 +50,10 @@ properties: power-domains: maxItems: 1
- feature-domains:
- minItems: 1
- maxItems: 3
What are the 3 entries?
Rob
I thought I was benefiting from the description of the pattern-property in the RIFSC YAML file. But yes anyway, it seems like it needs some description here as the dependency does not appear in this file.
I picked 3 as a maxItems for our ST needs, I'll give it some more thought when coming back with something clearer.
I will change that in V2, thank you for pointing that out.
Best regards, Gatien