Hi,
I am working on an imx8mn-based board with an ES9080 codec and I am trying to get EASCR to work. (The ES9080 driver is not upstreamed yet).
Audio playback works fine via simple-audio-card and here are my changes to get EASRC to work:
- sound-ess { - compatible = "simple-audio-card"; - simple-audio-card,name = "ess-audio"; - simple-audio-card,format = "left_j"; - simple-audio-card,frame-master = <&s2cpu>; - simple-audio-card,bitclock-master = <&s2cpu>; - - s2cpu: simple-audio-card,cpu { - sound-dai = <&sai2>; - dai-tdm-slot-num = <8>; - dai-tdm-slot-width = <32>; - }; - - simple-audio-card,codec { - sound-dai = <&es9080>; - }; + sound-es9080 { + compatible = "fsl,imx-audio-es9080"; + model = "es9080-with-easrc"; + audio-cpu = <&sai2>; + audio-codec = <&es9080>; + audio-asrc = <&easrc>; }; };
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 8d14b5593658..27b8f2c0cd65 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -624,6 +624,14 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) codec_dai_name = "sgtl5000"; priv->codec_priv.mclk_id = SGTL5000_SYSCLK; priv->dai_fmt |= SND_SOC_DAIFMT_CBP_CFP; + } else if (of_device_is_compatible(np, "fsl,imx-audio-es9080")) { + codec_dai_name = "es9080"; + priv->dai_fmt |= SND_SOC_DAIFMT_CBC_CFC; + priv->dai_link[1].dpcm_capture = 0; + priv->dai_link[2].dpcm_capture = 0; + priv->cpu_priv.slot_width = 32; + priv->card.dapm_routes = audio_map_tx; + priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_tx); } else if (of_device_is_compatible(np, "fsl,imx-audio-tlv320aic32x4")) { codec_dai_name = "tlv320aic32x4-hifi"; priv->dai_fmt |= SND_SOC_DAIFMT_CBP_CFP; @@ -902,6 +910,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = { { .compatible = "fsl,imx-audio-tlv320aic32x4", }, { .compatible = "fsl,imx-audio-tlv320aic31xx", }, { .compatible = "fsl,imx-audio-sgtl5000", }, + { .compatible = "fsl,imx-audio-es9080", }, { .compatible = "fsl,imx-audio-wm8962", }, { .compatible = "fsl,imx-audio-wm8960", }, { .compatible = "fsl,imx-audio-mqs", },
The es9080-with-easrc card is registered, but after running 'speaker-test' no audio output is present.
Is there a way to use the EASRC driver with the simple-audio-card without touching fsl-asoc-card.c? That would be preferable.
Would you have any suggestions as to what may be missing to get EASRC to work?
Thanks,
Fabio Estevam