On Fri, Jul 07, 2023 at 02:07:18PM +0000, Oleksii Moisieiev wrote:
Gatien Chevallier gatien.chevallier@foss.st.com writes:
feature-domains is an optional property that allows a peripheral to refer to one or more feature domain controller(s).
Description of this property is added to all peripheral binding files of the peripheral under the STM32 firewall controllers. It allows an accurate representation of the hardware, where various peripherals are connected to this firewall bus. The firewall can then check the peripheral accesses before allowing it to probe.
Signed-off-by: Gatien Chevallier gatien.chevallier@foss.st.com
Disclaimer: Some error with dtbs_check will be observed as I've considered the property to be generic, as Rob asked
Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml | 4 ++++ Documentation/devicetree/bindings/dma/st,stm32-dma.yaml | 4 ++++ Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml | 4 ++++ Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 4 ++++ Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml | 4 ++++ .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 ++++ Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml | 4 ++++ .../devicetree/bindings/media/cec/st,stm32-cec.yaml | 4 ++++ Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml | 4 ++++ .../bindings/memory-controllers/st,stm32-fmc2-ebi.yaml | 4 ++++ Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml | 4 ++++ Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml | 5 +++++ Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 4 ++++ Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 4 ++++ Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 4 ++++ .../devicetree/bindings/regulator/st,stm32-vrefbuf.yaml | 4 ++++ Documentation/devicetree/bindings/rng/st,stm32-rng.yaml | 4 ++++ Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 4 ++++ Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml | 4 ++++ Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 4 ++++ .../devicetree/bindings/sound/st,stm32-spdifrx.yaml | 4 ++++ Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml | 4 ++++ Documentation/devicetree/bindings/spi/st,stm32-spi.yaml | 4 ++++ Documentation/devicetree/bindings/usb/dwc2.yaml | 4 ++++ 24 files changed, 97 insertions(+)
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index b767ec72a999..daf8dcaef627 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -50,6 +50,10 @@ properties: power-domains: maxItems: 1
- feature-domains:
- minItems: 1
- maxItems: 3
I beliewe feature-domains is generic binding. This means that maxItems can be implementation dependend. I would rather drop maxItems so the following format will be possible:
feature-domains = <&etzpc 1>, <&etzpc 2>, <&some_other_domain 1 2 3 4> feature-domain-names = "firewall 1", "firewall 2", "other_domain"
The above already allows this (not -names, but the number of entries).
Also I beliewe driver will handle feature-domain-names property so it will parse feature-domains only related to the firewall.
Now I'm curious. What's an example that's not a firewall?
(Note I'm still not happy with the naming of 'feature' as anything is a feature, but that's the least of the issues really.)
Rob