Hello!
I have an asus a8jn laptop and a integrated audio with Analog Devices AD1986A chip.
$ lspci -vnn 0:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1447] Flags: bus master, fast devsel, latency 0, IRQ 21 Memory at febfc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied>
The audio seems to work properly on the right channel, but not on the left. All I get on the left channel is a loud screeching noise followed by a pop when the audio turns off. The microphon jack don't work also.
I make a patch from the solution described in this http://mailman.alsa-project.org/pipermail/alsa-devel/2007-March/000093.html message:
diff -Nur alsa-driver-1.0.14rc3/alsa-kernel/pci/hda/patch_analog.c alsa-driver-1.0.14rc3_ad1986a/alsa-kernel/pci/hda/patch_analog.c --- alsa-driver-1.0.14rc3/alsa-kernel/pci/hda/patch_analog.c 2007-03-06 15:26:32.000000000 +0300 +++ alsa-driver-1.0.14rc3_ad1986a/alsa-kernel/pci/hda/patch_analog.c 2007-04-20 23:32:19.000000000 +0400 @@ -873,7 +873,7 @@ board_config = snd_hda_check_board_config(codec, AD1986A_MODELS, ad1986a_models, ad1986a_cfg_tbl); - switch (board_config) { +/* switch (board_config) { case AD1986A_3STACK: spec->num_mixers = 2; spec->mixers[1] = ad1986a_3st_mixers; @@ -912,6 +912,18 @@ spec->multiout.dig_out_nid = 0; break; } +*/ + + spec->num_mixers = 2; + spec->mixers[1] = ad1986a_3st_mixers; + spec->num_init_verbs = 3; + spec->init_verbs[1] = ad1986a_3st_init_verbs; + spec->init_verbs[2] = ad1986a_ch2_init; + spec->channel_mode = ad1986a_modes; + spec->num_channel_mode = ARRAY_SIZE(ad1986a_modes); + spec->need_dac_fix = 1; + spec->multiout.max_channels = 2; + spec->multiout.num_dacs = 1;
return 0; }
I don't know, why snd_hda_check_board_config() return wrong value, but that workaround works.
Thanks! Dmitry Ursegov