Hi
I am a little irritated that there has been no replies to my questions to this list (http://mailman.alsa-project.org/pipermail/alsa-devel/2007-September/003387.h..., http://mailman.alsa-project.org/pipermail/alsa-devel/2007-September/003083.h...).
Am i on the wrong list? Please tell me if so.
Probably its also that i didn't make clear in my last post that the tascam driver works on arm with my US122 sound card, for ca. 51 seconds. After that i get the following error:
Sequence Error!(hcd_frame=6 ep=8in;wait=65538,frame=2). Most propably some urb of usb-frame 65538 is still missing. Cause could be too long delays in usb-hcd interrupt handling.
I also tried insmod ./2.6.18/kernel/sound/usb/usx2y/snd-usb-usx2y.ko nrpacks=X with X=[1,2,4,8]. I thought that if it is really an CPU performance problem than probably a bigger buffer would eliminate the problem. However the error persisted. Even commenting out /* #define USX2Y_NRPACKS_VARIABLE y */ and setting #define USX2Y_NRPACKS 1 didn't help.
So my question is now, is the 250Mhz ARM really to slow or is there any chance that there is an error in either the usb stack or the driver exposed only on the ARM architecture? Things speaking for the latter are: *Error allways in the 65536-65540 value. *Error happens most of the times after about 50secs.
Since i do not know much about USB any hint is apreciated. ST