[alsa-devel] [PATCH v3 2/5] ALSA: hda: move common hda controller register defines up

From: Jeeja KP jeeja.kp@intel.com

The HDA register defines would be accessed by both existing codes as well as new code, so move it up to include/sound No code change, fixed few alignment though

Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- include/sound/hda_registers.h | 168 ++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/hda_controller.h | 164 +-------------------------------------- 2 files changed, 169 insertions(+), 163 deletions(-) create mode 100644 include/sound/hda_registers.h

diff --git a/include/sound/hda_registers.h b/include/sound/hda_registers.h new file mode 100644 index 000000000000..6afb26191f4d --- /dev/null +++ b/include/sound/hda_registers.h @@ -0,0 +1,168 @@ +#ifndef __SOUND_HDA_REGISTERS_H +#define __SOUND_HDA_REGISTERS_H + +/* + * registers + */ +#define AZX_REG_GCAP 0x00 +#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ +#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ +#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ +#define AZX_GCAP_ISS (15 << 8) /* # of input streams */ +#define AZX_GCAP_OSS (15 << 12) /* # of output streams */ +#define AZX_REG_VMIN 0x02 +#define AZX_REG_VMAJ 0x03 +#define AZX_REG_OUTPAY 0x04 +#define AZX_REG_INPAY 0x06 +#define AZX_REG_GCTL 0x08 +#define AZX_GCTL_RESET (1 << 0) /* controller reset */ +#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ +#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ +#define AZX_REG_WAKEEN 0x0c +#define AZX_REG_STATESTS 0x0e +#define AZX_REG_GSTS 0x10 +#define AZX_GSTS_FSTS (1 << 1) /* flush status */ +#define AZX_REG_INTCTL 0x20 +#define AZX_REG_INTSTS 0x24 +#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ +#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ +#define AZX_REG_SSYNC 0x38 +#define AZX_REG_CORBLBASE 0x40 +#define AZX_REG_CORBUBASE 0x44 +#define AZX_REG_CORBWP 0x48 +#define AZX_REG_CORBRP 0x4a +#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ +#define AZX_REG_CORBCTL 0x4c +#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ +#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ +#define AZX_REG_CORBSTS 0x4d +#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ +#define AZX_REG_CORBSIZE 0x4e + +#define AZX_REG_RIRBLBASE 0x50 +#define AZX_REG_RIRBUBASE 0x54 +#define AZX_REG_RIRBWP 0x58 +#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ +#define AZX_REG_RINTCNT 0x5a +#define AZX_REG_RIRBCTL 0x5c +#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ +#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ +#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ +#define AZX_REG_RIRBSTS 0x5d +#define AZX_RBSTS_IRQ (1 << 0) /* response irq */ +#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ +#define AZX_REG_RIRBSIZE 0x5e + +#define AZX_REG_IC 0x60 +#define AZX_REG_IR 0x64 +#define AZX_REG_IRS 0x68 +#define AZX_IRS_VALID (1<<1) +#define AZX_IRS_BUSY (1<<0) + +#define AZX_REG_DPLBASE 0x70 +#define AZX_REG_DPUBASE 0x74 +#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ + +/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ +enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; + +/* stream register offsets from stream base */ +#define AZX_REG_SD_CTL 0x00 +#define AZX_REG_SD_STS 0x03 +#define AZX_REG_SD_LPIB 0x04 +#define AZX_REG_SD_CBL 0x08 +#define AZX_REG_SD_LVI 0x0c +#define AZX_REG_SD_FIFOW 0x0e +#define AZX_REG_SD_FIFOSIZE 0x10 +#define AZX_REG_SD_FORMAT 0x12 +#define AZX_REG_SD_BDLPL 0x18 +#define AZX_REG_SD_BDLPU 0x1c + +/* PCI space */ +#define AZX_PCIREG_TCSEL 0x44 + +/* + * other constants + */ + +/* max number of fragments - we may use more if allocating more pages for BDL */ +#define BDL_SIZE 4096 +#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) +#define AZX_MAX_FRAG 32 +/* max buffer size - no h/w limit, you can increase as you like */ +#define AZX_MAX_BUF_SIZE (1024*1024*1024) + +/* RIRB int mask: overrun[2], response[0] */ +#define RIRB_INT_RESPONSE 0x01 +#define RIRB_INT_OVERRUN 0x04 +#define RIRB_INT_MASK 0x05 + +/* STATESTS int mask: S3,SD2,SD1,SD0 */ +#define AZX_DEFAULT_CODECS 4 +#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) + +/* SD_CTL bits */ +#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ +#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ +#define SD_CTL_STRIPE (3 << 16) /* stripe control */ +#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ +#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ +#define SD_CTL_STREAM_TAG_MASK (0xf << 20) +#define SD_CTL_STREAM_TAG_SHIFT 20 + +/* SD_CTL and SD_STS */ +#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ +#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ +#define SD_INT_COMPLETE 0x04 /* completion interrupt */ +#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ + SD_INT_COMPLETE) + +/* SD_STS */ +#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ + +/* INTCTL and INTSTS */ +#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ +#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ +#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ + +/* below are so far hardcoded - should read registers in future */ +#define AZX_MAX_CORB_ENTRIES 256 +#define AZX_MAX_RIRB_ENTRIES 256 + +/* HD Audio class code */ +#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 + +/* + * macros for easy use + */ + +#define azx_writel(chip, reg, value) \ + ((chip)->ops->reg_writel(value, (chip)->remap_addr + AZX_REG_##reg)) +#define azx_readl(chip, reg) \ + ((chip)->ops->reg_readl((chip)->remap_addr + AZX_REG_##reg)) +#define azx_writew(chip, reg, value) \ + ((chip)->ops->reg_writew(value, (chip)->remap_addr + AZX_REG_##reg)) +#define azx_readw(chip, reg) \ + ((chip)->ops->reg_readw((chip)->remap_addr + AZX_REG_##reg)) +#define azx_writeb(chip, reg, value) \ + ((chip)->ops->reg_writeb(value, (chip)->remap_addr + AZX_REG_##reg)) +#define azx_readb(chip, reg) \ + ((chip)->ops->reg_readb((chip)->remap_addr + AZX_REG_##reg)) + +#define azx_sd_writel(chip, dev, reg, value) \ + ((chip)->ops->reg_writel(value, (dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_readl(chip, dev, reg) \ + ((chip)->ops->reg_readl((dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_writew(chip, dev, reg, value) \ + ((chip)->ops->reg_writew(value, (dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_readw(chip, dev, reg) \ + ((chip)->ops->reg_readw((dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_writeb(chip, dev, reg, value) \ + ((chip)->ops->reg_writeb(value, (dev)->sd_addr + AZX_REG_##reg)) +#define azx_sd_readb(chip, dev, reg) \ + ((chip)->ops->reg_readb((dev)->sd_addr + AZX_REG_##reg)) + +#define azx_has_pm_runtime(chip) \ + (!AZX_DCAPS_PM_RUNTIME || ((chip)->driver_caps & AZX_DCAPS_PM_RUNTIME)) + +#endif diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index 2aa75e34a718..608e31597c22 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -20,136 +20,9 @@ #include <sound/core.h> #include <sound/pcm.h> #include <sound/initval.h> +#include <sound/hda_registers.h> #include "hda_codec.h"

-/* - * registers - */ -#define AZX_REG_GCAP 0x00 -#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ -#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ -#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ -#define AZX_GCAP_ISS (15 << 8) /* # of input streams */ -#define AZX_GCAP_OSS (15 << 12) /* # of output streams */ -#define AZX_REG_VMIN 0x02 -#define AZX_REG_VMAJ 0x03 -#define AZX_REG_OUTPAY 0x04 -#define AZX_REG_INPAY 0x06 -#define AZX_REG_GCTL 0x08 -#define AZX_GCTL_RESET (1 << 0) /* controller reset */ -#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ -#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ -#define AZX_REG_WAKEEN 0x0c -#define AZX_REG_STATESTS 0x0e -#define AZX_REG_GSTS 0x10 -#define AZX_GSTS_FSTS (1 << 1) /* flush status */ -#define AZX_REG_INTCTL 0x20 -#define AZX_REG_INTSTS 0x24 -#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ -#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ -#define AZX_REG_SSYNC 0x38 -#define AZX_REG_CORBLBASE 0x40 -#define AZX_REG_CORBUBASE 0x44 -#define AZX_REG_CORBWP 0x48 -#define AZX_REG_CORBRP 0x4a -#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ -#define AZX_REG_CORBCTL 0x4c -#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ -#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ -#define AZX_REG_CORBSTS 0x4d -#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ -#define AZX_REG_CORBSIZE 0x4e - -#define AZX_REG_RIRBLBASE 0x50 -#define AZX_REG_RIRBUBASE 0x54 -#define AZX_REG_RIRBWP 0x58 -#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ -#define AZX_REG_RINTCNT 0x5a -#define AZX_REG_RIRBCTL 0x5c -#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ -#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ -#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ -#define AZX_REG_RIRBSTS 0x5d -#define AZX_RBSTS_IRQ (1 << 0) /* response irq */ -#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ -#define AZX_REG_RIRBSIZE 0x5e - -#define AZX_REG_IC 0x60 -#define AZX_REG_IR 0x64 -#define AZX_REG_IRS 0x68 -#define AZX_IRS_VALID (1<<1) -#define AZX_IRS_BUSY (1<<0) - -#define AZX_REG_DPLBASE 0x70 -#define AZX_REG_DPUBASE 0x74 -#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ - -/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ -enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; - -/* stream register offsets from stream base */ -#define AZX_REG_SD_CTL 0x00 -#define AZX_REG_SD_STS 0x03 -#define AZX_REG_SD_LPIB 0x04 -#define AZX_REG_SD_CBL 0x08 -#define AZX_REG_SD_LVI 0x0c -#define AZX_REG_SD_FIFOW 0x0e -#define AZX_REG_SD_FIFOSIZE 0x10 -#define AZX_REG_SD_FORMAT 0x12 -#define AZX_REG_SD_BDLPL 0x18 -#define AZX_REG_SD_BDLPU 0x1c - -/* PCI space */ -#define AZX_PCIREG_TCSEL 0x44 - -/* - * other constants - */ - -/* max number of fragments - we may use more if allocating more pages for BDL */ -#define BDL_SIZE 4096 -#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) -#define AZX_MAX_FRAG 32 -/* max buffer size - no h/w limit, you can increase as you like */ -#define AZX_MAX_BUF_SIZE (1024*1024*1024) - -/* RIRB int mask: overrun[2], response[0] */ -#define RIRB_INT_RESPONSE 0x01 -#define RIRB_INT_OVERRUN 0x04 -#define RIRB_INT_MASK 0x05 - -/* STATESTS int mask: S3,SD2,SD1,SD0 */ -#define AZX_DEFAULT_CODECS 4 -#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) - -/* SD_CTL bits */ -#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ -#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ -#define SD_CTL_STRIPE (3 << 16) /* stripe control */ -#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ -#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ -#define SD_CTL_STREAM_TAG_MASK (0xf << 20) -#define SD_CTL_STREAM_TAG_SHIFT 20 - -/* SD_CTL and SD_STS */ -#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ -#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ -#define SD_INT_COMPLETE 0x04 /* completion interrupt */ -#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ - SD_INT_COMPLETE) - -/* SD_STS */ -#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ - -/* INTCTL and INTSTS */ -#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ -#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ -#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ - -/* below are so far hardcoded - should read registers in future */ -#define AZX_MAX_CORB_ENTRIES 256 -#define AZX_MAX_RIRB_ENTRIES 256 - /* driver quirks (capabilities) */ /* bits 0-7 are used for indicating driver type */ #define AZX_DCAPS_NO_TCSEL (1 << 8) /* No Intel TCSEL bit */ @@ -182,9 +55,6 @@ enum { AZX_SNOOP_TYPE_NVIDIA, };

-/* HD Audio class code */ -#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 - struct azx_dev { struct snd_dma_buffer bdl; /* BDL buffer */ u32 *posbuf; /* position buffer pointer */ @@ -372,38 +242,6 @@ struct azx { #define azx_snoop(chip) true #endif

-/* - * macros for easy use - */ - -#define azx_writel(chip, reg, value) \ - ((chip)->ops->reg_writel(value, (chip)->remap_addr + AZX_REG_##reg)) -#define azx_readl(chip, reg) \ - ((chip)->ops->reg_readl((chip)->remap_addr + AZX_REG_##reg)) -#define azx_writew(chip, reg, value) \ - ((chip)->ops->reg_writew(value, (chip)->remap_addr + AZX_REG_##reg)) -#define azx_readw(chip, reg) \ - ((chip)->ops->reg_readw((chip)->remap_addr + AZX_REG_##reg)) -#define azx_writeb(chip, reg, value) \ - ((chip)->ops->reg_writeb(value, (chip)->remap_addr + AZX_REG_##reg)) -#define azx_readb(chip, reg) \ - ((chip)->ops->reg_readb((chip)->remap_addr + AZX_REG_##reg)) - -#define azx_sd_writel(chip, dev, reg, value) \ - ((chip)->ops->reg_writel(value, (dev)->sd_addr + AZX_REG_##reg)) -#define azx_sd_readl(chip, dev, reg) \ - ((chip)->ops->reg_readl((dev)->sd_addr + AZX_REG_##reg)) -#define azx_sd_writew(chip, dev, reg, value) \ - ((chip)->ops->reg_writew(value, (dev)->sd_addr + AZX_REG_##reg)) -#define azx_sd_readw(chip, dev, reg) \ - ((chip)->ops->reg_readw((dev)->sd_addr + AZX_REG_##reg)) -#define azx_sd_writeb(chip, dev, reg, value) \ - ((chip)->ops->reg_writeb(value, (dev)->sd_addr + AZX_REG_##reg)) -#define azx_sd_readb(chip, dev, reg) \ - ((chip)->ops->reg_readb((dev)->sd_addr + AZX_REG_##reg)) - -#define azx_has_pm_runtime(chip) \ - (!AZX_DCAPS_PM_RUNTIME || ((chip)->driver_caps & AZX_DCAPS_PM_RUNTIME))

/* PCM setup */ static inline struct azx_dev *get_azx_dev(struct snd_pcm_substream *substream)