[Sound-open-firmware] MinnowBoard FW fails to boot
Guennadi Liakhovetski
guennadi.liakhovetski at linux.intel.com
Mon Mar 25 15:46:43 CET 2019
Hi Pierre,
On Mon, Mar 25, 2019 at 09:23:17AM -0400, Pierre-Louis Bossart wrote:
> On 3/10/19 9:53 PM, Guennadi Liakhovetski wrote:
> > Hi Xiuli,
> >
> > On Mon, Mar 25, 2019 at 03:52:21AM +0000, Pan, Xiuli wrote:
> > > > -----Original Message-----
> > > > From: Sound-open-firmware [mailto:sound-open-firmware-bounces at alsa-
> > > > project.org] On Behalf Of Ranjani Sridharan
> > > > Sent: Saturday, March 23, 2019 04:40
> > > > To: Liam Girdwood <liam.r.girdwood at linux.intel.com>; Guennadi Liakhovetski
> > > > <guennadi.liakhovetski at linux.intel.com>; sound-open-firmware at alsa-
> > > > project.org
> > > > Subject: Re: [Sound-open-firmware] MinnowBoard FW fails to boot
> > > >
> > > > On Fri, 2019-03-22 at 16:14 +0000, Liam Girdwood wrote:
> > > > > On Fri, 2019-03-22 at 17:03 +0100, Guennadi Liakhovetski wrote:
> > > > > > Hi,
> > > > > >
> > > > > > Is MinnowBoard supposed to work with the current sources?
> > > > > >
> > > > >
> > > > > Yes.
> > > > >
> > > > > > I tried 2 boards: an older Max and a new Turbot with the same
> > > > > > result. After upgrading the BIOS to 1.0 and configuring it as
> > > > > > described on
> > > > > >
> > > > https://thesofproject.github.io/latest/getting_started/setup/setup_minnowboa
> > > > rd_turbot.html
> > > > > > and installing the ACPI scripts, I see the following in dmesg:
> > > > > >
> > > > > > [ 7.858284] sof-audio-acpi 80860F28:01: ACPI DSP detected
> > > > > > [ 7.858293] sof-audio-acpi 80860F28:01: BYT-CR not detected
> > > > > > [ 7.858417] sof-audio-acpi 80860F28:01: probing SOF DSP
> > > > > > device....
> > > > > > [ 7.858437] sof-audio-acpi 80860F28:01: sof_probe_work entry
> > > > > > [ 7.858442] sof-audio-acpi 80860F28:01: LPE PHY base at
> > > > > > 0x90a00000 size
> > > > > > 0x200000
> > > > > > [ 7.858495] sof-audio-acpi 80860F28:01: LPE VADDR
> > > > > > 000000005df3cd39
> > > > > > [ 7.858498] sof-audio-acpi 80860F28:01: IMR base at 0x20000000
> > > > > > size
> > > > > > 0x100000
> > > > > > [ 7.858525] sof-audio-acpi 80860F28:01: IMR VADDR
> > > > > > 00000000c1d6001c
> > > > > > [ 7.858530] sof-audio-acpi 80860F28:01: using IRQ 29
> > > > > > [ 7.861914] sof-audio-acpi 80860F28:01: loading firmware
> > > > > > [ 7.903934] sof-audio-acpi 80860F28:01: header size=0xc9a4
> > > > > > modules=0x1
> > > > > > abi=0x1 size=16
> > > > > > [ 7.903980] sof-audio-acpi 80860F28:01: new module size 0xc998
> > > > > > blocks 0x11
> > > > > > type 0x0
> > > > > > [ 7.903984] sof-audio-acpi 80860F28:01: block 0 type 0x1 size
> > > > > > 0xf0
> > > > > > ==> offset 0xc0000
> > > > > > [ 7.904148] sof-audio-acpi 80860F28:01: block 1 type 0x1 size
> > > > > > 0x16c
> > > > > > ==> offset 0xc0400
> > > > > > [ 7.904454] sof-audio-acpi 80860F28:01: block 2 type 0x1 size
> > > > > > 0x8
> > > > > > ==> offset 0xc057c
> > > > > > [ 7.904461] sof-audio-acpi 80860F28:01: block 3 type 0x1 size
> > > > > > 0x8
> > > > > > ==> offset 0xc059c
> > > > > > [ 7.904468] sof-audio-acpi 80860F28:01: block 4 type 0x1 size
> > > > > > 0x8
> > > > > > ==> offset 0xc05bc
> > > > > > [ 7.904475] sof-audio-acpi 80860F28:01: block 5 type 0x1 size
> > > > > > 0x8
> > > > > > ==> offset 0xc05dc
> > > > > > [ 7.904481] sof-audio-acpi 80860F28:01: block 6 type 0x1 size
> > > > > > 0x8
> > > > > > ==> offset 0xc05fc
> > > > > > [ 7.904488] sof-audio-acpi 80860F28:01: block 7 type 0x1 size
> > > > > > 0x4
> > > > > > ==> offset 0xc061c
> > > > > > [ 7.904492] sof-audio-acpi 80860F28:01: block 8 type 0x1 size
> > > > > > 0x8
> > > > > > ==> offset 0xc063c
> > > > > > [ 7.904498] sof-audio-acpi 80860F28:01: block 9 type 0x1 size
> > > > > > 0x4
> > > > > > ==> offset 0xc0658
> > > > > > [ 7.904502] sof-audio-acpi 80860F28:01: block 10 type 0x1 size
> > > > > > 0x18
> > > > > > ==> offset 0xc065c
> > > > > > [ 7.904522] sof-audio-acpi 80860F28:01: block 11 type 0x1 size
> > > > > > 0x8
> > > > > > ==> offset 0xc067c
> > > > > > [ 7.904529] sof-audio-acpi 80860F28:01: block 12 type 0x1 size
> > > > > > 0xad20
> > > > > > ==> offset 0xc06a0
> > > > > > [ 7.942341] sof-audio-acpi 80860F28:01: block 13 type 0x2 size
> > > > > > 0xc34
> > > > > > ==> offset 0x100008
> > > > > > [ 7.945002] sof-audio-acpi 80860F28:01: block 14 type 0x2 size
> > > > > > 0x8
> > > > > > ==> offset 0x100c3c
> > > > > > [ 7.945009] sof-audio-acpi 80860F28:01: block 15 type 0x2 size
> > > > > > 0xc50
> > > > > > ==> offset 0x100c48
> > > > > > [ 7.947695] sof-audio-acpi 80860F28:01: block 16 type 0x2 size
> > > > > > 0x6c
> > > > > > ==> offset 0x101f20
> > > > > > [ 7.947797] sof-audio-acpi 80860F28:01: booting DSP firmware
> > > > > > [ 7.993488] intel_rapl: Found RAPL domain package
> > > > > > [ 7.993491] intel_rapl: Found RAPL domain core
> > > > > > [ 9.037666] sof-audio-acpi 80860F28:01: error: unable to run
> > > > > > DSP firmware
> > > > > > [ 9.038008] sof-audio-acpi 80860F28:01: error: unexpected fault
> > > > > > 0xffffffff
> > > > > > trace 0xffffffff
> > > > > > [ 9.038094] sof-audio-acpi 80860F28:01: error: failed to reset
> > > > > > DSP
> > > > > > [ 9.038159] sof-audio-acpi 80860F28:01: error: failed to boot
> > > > > > DSP firmware
> > > > > > -19
> > > > > > [ 9.038266] sof-audio-acpi 80860F28:01: error: sof_probe_work
> > > > > > failed err:
> > > > > > -19
> > > > >
> > > > > Looks like a driver regression, since 0xffffffff means PCI address
> > > > > space is
> > > > > powered OFF when it should be ON.
> > > > >
> > > > > Can you log as a regression on GH.
> > > > Liam/Guennadi,
> > > >
> > > > I dont see this regression with my minnowboard + RT5651 set up.
> > > >
> > > Hi Guennadi,
> > >
> > > Please check if you do the following step. Most people ignored this, since they did not start with a blank one.
> > > Also enable LPE Audio Support in bios
> >
> > Yes, I've done this afteer every BIOS upgrade and it didn't help.
>
> did you enable the DSP is the BIOS south cluster? it's not listed in teh
> documentation. You need to select the enable but not report case,
Are you sure this was on Minnowboard? Maybe in older BIOS versions? I see an
"enable audio DSP" option on Up^2, but not on Minnow. On Minnow I only see
"enable audio," which of course is on. But even on "Up^2" I don't see any
"not report" choice?
> and use LPEX.aml for nocodec mode.
Would this lead to the observed failure - ENODEV? I thought the codec would
only come into play later. I was actually running a with-codev kernel and
BIOS set up. First I was running that on a MinnowBoard Max, where a codec
was indeed connected. Then I switched over to a Torbot without replacing
any of the software.
> If this doesn't work, let's continue with a github issue where it's easier
> to add logs and keep track of the problem.
It didn't. I've rebuilt the kernel with FORCE_NOCODEC_MODE=y
[ 7.951333] sof-audio-acpi 80860F28:01: ACPI DSP detected
[ 7.951342] sof-audio-acpi 80860F28:01: BYT-CR not detected
[ 7.951345] sof-audio-acpi 80860F28:01: Force to use nocodec mode
[ 7.951354] sof-audio-acpi 80860F28:01: probing SOF DSP device....
[ 7.951358] sof-audio-acpi 80860F28:01: LPE PHY base at 0x90a00000 size 0x200000
[ 7.951410] sof-audio-acpi 80860F28:01: LPE VADDR 00000000a246845d
[ 7.951413] sof-audio-acpi 80860F28:01: IMR base at 0x20000000 size 0x100000
[ 7.951428] sof-audio-acpi 80860F28:01: IMR VADDR 000000005bbccd5b
[ 7.951432] sof-audio-acpi 80860F28:01: using IRQ 29
...
and I'm still getting the same:
[ 8.107441] sof-audio-acpi 80860F28:01: booting DSP firmware
[ 9.188571] sof-audio-acpi 80860F28:01: error: unable to run DSP firmware
[ 9.188926] sof-audio-acpi 80860F28:01: error: unexpected fault 0xffffffff trace 0xffffffff
[ 9.189014] sof-audio-acpi 80860F28:01: error: failed to reset DSP
[ 9.189080] sof-audio-acpi 80860F28:01: error: failed to boot DSP firmware -19
[ 9.189184] sof-audio-acpi 80860F28:01: error: failed to probe DSP hardware!
I'll create a GH issue...
Thanks
Guennadi
More information about the Sound-open-firmware
mailing list