[Sound-open-firmware] MinnowBoard FW fails to boot

[Pierre-Louis Bossart]

On 3/10/19 9:53 PM, Guennadi Liakhovetski wrote:
> Hi Xiuli,
> 
> On Mon, Mar 25, 2019 at 03:52:21AM +0000, Pan, Xiuli wrote:
>>> -----Original Message-----
>>> From: Sound-open-firmware [mailto:sound-open-firmware-bounces at alsa-
>>> project.org] On Behalf Of Ranjani Sridharan
>>> Sent: Saturday, March 23, 2019 04:40
>>> To: Liam Girdwood <liam.r.girdwood at linux.intel.com>; Guennadi Liakhovetski
>>> <guennadi.liakhovetski at linux.intel.com>; sound-open-firmware at alsa-
>>> project.org
>>> Subject: Re: [Sound-open-firmware] MinnowBoard FW fails to boot
>>>
>>> On Fri, 2019-03-22 at 16:14 +0000, Liam Girdwood wrote:
>>>> On Fri, 2019-03-22 at 17:03 +0100, Guennadi Liakhovetski wrote:
>>>>> Hi,
>>>>>
>>>>> Is MinnowBoard supposed to work with the current sources?
>>>>>
>>>>
>>>> Yes.
>>>>
>>>>> I tried 2 boards: an older Max and a new Turbot with the same
>>>>> result. After upgrading the BIOS to 1.0 and configuring it as
>>>>> described on
>>>>>
>>> https://thesofproject.github.io/latest/getting_started/setup/setup_minnowboa
>>> rd_turbot.html
>>>>> and installing the ACPI scripts, I see the following in dmesg:
>>>>>
>>>>> [    7.858284] sof-audio-acpi 80860F28:01: ACPI DSP detected
>>>>> [    7.858293] sof-audio-acpi 80860F28:01: BYT-CR not detected
>>>>> [    7.858417] sof-audio-acpi 80860F28:01: probing SOF DSP
>>>>> device....
>>>>> [    7.858437] sof-audio-acpi 80860F28:01: sof_probe_work entry
>>>>> [    7.858442] sof-audio-acpi 80860F28:01: LPE PHY base at
>>>>> 0x90a00000 size
>>>>> 0x200000
>>>>> [    7.858495] sof-audio-acpi 80860F28:01: LPE VADDR
>>>>> 000000005df3cd39
>>>>> [    7.858498] sof-audio-acpi 80860F28:01: IMR base at 0x20000000
>>>>> size
>>>>> 0x100000
>>>>> [    7.858525] sof-audio-acpi 80860F28:01: IMR VADDR
>>>>> 00000000c1d6001c
>>>>> [    7.858530] sof-audio-acpi 80860F28:01: using IRQ 29
>>>>> [    7.861914] sof-audio-acpi 80860F28:01: loading firmware
>>>>> [    7.903934] sof-audio-acpi 80860F28:01: header size=0xc9a4
>>>>> modules=0x1
>>>>> abi=0x1 size=16
>>>>> [    7.903980] sof-audio-acpi 80860F28:01: new module size 0xc998
>>>>> blocks 0x11
>>>>> type 0x0
>>>>> [    7.903984] sof-audio-acpi 80860F28:01: block 0 type 0x1 size
>>>>> 0xf0
>>>>> ==>  offset 0xc0000
>>>>> [    7.904148] sof-audio-acpi 80860F28:01: block 1 type 0x1 size
>>>>> 0x16c
>>>>> ==>  offset 0xc0400
>>>>> [    7.904454] sof-audio-acpi 80860F28:01: block 2 type 0x1 size
>>>>> 0x8
>>>>> ==>  offset 0xc057c
>>>>> [    7.904461] sof-audio-acpi 80860F28:01: block 3 type 0x1 size
>>>>> 0x8
>>>>> ==>  offset 0xc059c
>>>>> [    7.904468] sof-audio-acpi 80860F28:01: block 4 type 0x1 size
>>>>> 0x8
>>>>> ==>  offset 0xc05bc
>>>>> [    7.904475] sof-audio-acpi 80860F28:01: block 5 type 0x1 size
>>>>> 0x8
>>>>> ==>  offset 0xc05dc
>>>>> [    7.904481] sof-audio-acpi 80860F28:01: block 6 type 0x1 size
>>>>> 0x8
>>>>> ==>  offset 0xc05fc
>>>>> [    7.904488] sof-audio-acpi 80860F28:01: block 7 type 0x1 size
>>>>> 0x4
>>>>> ==>  offset 0xc061c
>>>>> [    7.904492] sof-audio-acpi 80860F28:01: block 8 type 0x1 size
>>>>> 0x8
>>>>> ==>  offset 0xc063c
>>>>> [    7.904498] sof-audio-acpi 80860F28:01: block 9 type 0x1 size
>>>>> 0x4
>>>>> ==>  offset 0xc0658
>>>>> [    7.904502] sof-audio-acpi 80860F28:01: block 10 type 0x1 size
>>>>> 0x18
>>>>> ==>  offset 0xc065c
>>>>> [    7.904522] sof-audio-acpi 80860F28:01: block 11 type 0x1 size
>>>>> 0x8
>>>>> ==>  offset 0xc067c
>>>>> [    7.904529] sof-audio-acpi 80860F28:01: block 12 type 0x1 size
>>>>> 0xad20
>>>>> ==>  offset 0xc06a0
>>>>> [    7.942341] sof-audio-acpi 80860F28:01: block 13 type 0x2 size
>>>>> 0xc34
>>>>> ==>  offset 0x100008
>>>>> [    7.945002] sof-audio-acpi 80860F28:01: block 14 type 0x2 size
>>>>> 0x8
>>>>> ==>  offset 0x100c3c
>>>>> [    7.945009] sof-audio-acpi 80860F28:01: block 15 type 0x2 size
>>>>> 0xc50
>>>>> ==>  offset 0x100c48
>>>>> [    7.947695] sof-audio-acpi 80860F28:01: block 16 type 0x2 size
>>>>> 0x6c
>>>>> ==>  offset 0x101f20
>>>>> [    7.947797] sof-audio-acpi 80860F28:01: booting DSP firmware
>>>>> [    7.993488] intel_rapl: Found RAPL domain package
>>>>> [    7.993491] intel_rapl: Found RAPL domain core
>>>>> [    9.037666] sof-audio-acpi 80860F28:01: error:  unable to run
>>>>> DSP firmware
>>>>> [    9.038008] sof-audio-acpi 80860F28:01: error: unexpected fault
>>>>> 0xffffffff
>>>>> trace 0xffffffff
>>>>> [    9.038094] sof-audio-acpi 80860F28:01: error: failed to reset
>>>>> DSP
>>>>> [    9.038159] sof-audio-acpi 80860F28:01: error: failed to boot
>>>>> DSP firmware
>>>>> -19
>>>>> [    9.038266] sof-audio-acpi 80860F28:01: error: sof_probe_work
>>>>> failed err:
>>>>> -19
>>>>
>>>> Looks like a driver regression, since 0xffffffff means PCI address
>>>> space is
>>>> powered OFF when it should be ON.
>>>>
>>>> Can you log as a regression on GH.
>>> Liam/Guennadi,
>>>
>>> I dont see this regression with my minnowboard + RT5651 set up.
>>>
>> Hi Guennadi,
>>
>> Please check if you do the following step. Most people ignored this, since they did not start with a blank one.
>>   
>> Also enable LPE Audio Support in bios
> 
> Yes, I've done this afteer every BIOS upgrade and it didn't help.

did you enable the DSP is the BIOS south cluster? it's not listed in teh 
documentation. You need to select the enable but not report case, and 
use LPEX.aml for nocodec mode.
If this doesn't work, let's continue with a github issue where it's 
easier to add logs and keep track of the problem.