[alsa-devel] [PATCH v2 1/3] ASoC: es8316: judge PCM rate at later timing

[Katsuhiro Suzuki]

Hello Mark,

On 2019/09/03 20:11, Mark Brown wrote:
> On Tue, Sep 03, 2019 at 04:19:10AM +0900, Katsuhiro Suzuki wrote:
>> On 2019/09/02 21:02, Mark Brown wrote:
> 
>>> The best way to handle this is to try to support both fixed and variable
>>> clock rates, some other drivers do this by setting constraints based on
>>> MCLK only if the MCLK has been set to a non-zero value.  They have the
>>> machine drivers reset the clock rate to 0 when it goes idle so that no
>>> constraints are applied then.  This means that if the machine has a
> 
>> In my understanding, fixed and variable clock both use set_sysclk() for
>> telling their MCLK to codec driver. For fixed MCLK cases we need to
>> apply constraint but for variable MCLK cases we should not set
>> constraints at set_sysclk(). How can we identify these two cases...?
> 
> Like I say it's usually done by settingthe MCLK to 0 when not in use and
> then not applying any constraints if there's no MCLK set.
> 

Ah... I understand. Current implementation refuses MCLK == 0.
I'll change to accept MCLK == 0 for fixed clock users and send v3 patch.

Best Regards,
Katsuhiro Suzuki