[alsa-devel] no audio output with TYAN S7025 motherboard and Realtek ALC262
paulepanter at users.sourceforge.net
Thu Mar 4 10:15:59 CET 2010
Am Mittwoch, den 03.03.2010, 10:54 -0800 schrieb Bryan Green:
> I have several systems with a TYAN S7025 motherboard and Realtek ALC262 chipset.
> I have not been able to produce any audio output. Well, that is except for
> one of the systems: after a variety of tweeks and tests, I got sound working
> on one system, but I do not know what change enabled sound to start working,
> and I have not been able to reproduce the effect on the other systems.
Can you give list of what tweeks you did (even incomplete).
> I have tested with kernels up to 2.6.33, and with ALSA version 220.127.116.11.
> For a non-working system, 'alsaconf' gives the following output:
> Unknown hardware: "HDA-Intel" "Realtek ALC262"
> "HDA:10ec0262,10ec0262,00100202" "0x8086" "0x3a3e"
> And dmesg gives the following:
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: irq 89 for MSI/MSI-X
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> hda_codec: ALC262: BIOS auto-probing.
> autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
> speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
> mono: mono_out=0x0
> inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
> realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
> realtek: Enable default setup for auto mode as fallback
> input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
> For the working system, the dmesg output is the same except for two lines:
> autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x14
> Is there a method for tweaking these values on the non-working system to match
> the working system, to see if that works?
Have you tried different values for the model parameter ? If I am not
mistaken you can use HDA-Analyzer  to change such values. But I never
used it myself.
> I've uploaded the alsa-info output from a non-working system here:
> I've uploaded the alsa-info output from the working system here:
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Size: 198 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
Url : http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20100304/7da1e4dd/attachment.sig
More information about the Alsa-devel