[alsa-devel] Incorrect model selection for HDA Intel based card.
wishie at wishie.net
Mon May 19 16:58:47 CEST 2008
On Mon, 19 May 2008 10:09:00 pm Takashi Iwai wrote:
> At Mon, 19 May 2008 04:19:14 +1000,
> Travis Place wrote:
> > Just had a user in #alsa on freenode, with an Asus P5GD1 mainboard.
> > They couldnt seem to get surround sound working at all.
> > It has an ALC880 based HDA-Intel sound device on board.
> > Now, the problem lies in the Susbsystem ID's (1043:814e).
> > These match in patch_realtek.c as follows:
> > SND_PCI_QUIRK(0x1043, 0x814e, "ASUS", ALC880_ASUS)
> > The users mainboard (The ASUS P5GD1) actually has 6 output jacks, aswell
> > as SPDIF, not the standard 3-jacks that the "ASUS" model quirk implies.
> > I talked this user through forcing the driver to use '6stack-digout' for
> > his sound device, and things all work fine now.
> Actually, this was changed originally from ALC880_5STACK for the
> exactly same mobo (changeset 4798). I guess 6stack-digout wasn't
> tested by that user.
> So, if 6stack-digout is confirmed to match better than now, it's
> fairly safe to replace the line. Care to send a patch with a proper
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
Going to get the user to run a few more tests, to confirm all is working as it
should (seems to be, on first glance) before submitting a patch/changelog.
Will let you know when ready.
Happiness is like peeing your pants. Everyone can see it, but only you can
feel its warmth
More information about the Alsa-devel