[alsa-devel] 1.0.16rc1 release -- error: 'system_utsname' undeclared
rick at measham.id.au
Thu Jan 24 22:12:06 CET 2008
Takashi Iwai wrote:
> It is surely on the current HG repo. You must be using an older
> repo. Try hg.alsa-project.org instead of hg-mirror.
That fixed it. I grabbed the latest alsa-driver and it didn't need the
patch. It all built just fine and installed without errors.
However it didn't fix the speakers so I'm no further ahead that 0.15 or
0.14 (input and output jacks work, but the internal speakers don't)
dmesg tells me there are zero speaker_outs. So I figure it didn't
auto-detect them, and there are no pins specified for this exact setup.
[128924.764000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level,
low) -> IRQ 21
[128924.764000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[128924.796000] ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2855:
autoconfig: line_outs=4 (0xd/0xc/0xf/0xb/0x0)
[128924.796000] ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2859:
[128924.796000] ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2863:
[128924.796000] ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2871:
inputs: mic=0xe, fmic=0x10, line=0x0, fline=0x0, cd=0x0, aux=0x0
My full setup (as output by alsa-info.sh) can be seen at
If there isn't an 'obvious' fix, I'm most happy to spend the time doing
whatever to get it working if you can point me in the right direction.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 3241 bytes
Desc: S/MIME Cryptographic Signature
Url : http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20080125/071fab0c/attachment.bin
More information about the Alsa-devel